how to fix your vape when it says no atomizer

How to Fix Check Atomizer/No Atomizer On A Pod Vape.

• 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
• 2. Check Your Contact Points for Damage.
• 3. Reseat your Coil/Pod.
• 4. Try Another Coil/Pod.

Full Answer

What does No atomizer mean on vape?

What does it mean when it says check atomizer? If you press the firing button on your e-cig and you see the message ‘no atomizer ‘ or ‘ check atomizer ‘ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.

What to do when your vape says check atomizer?

This guide will give you all the tips you need to fix this message

• Try another vape tank or vape mod. ...
• Check your vape coil. ...
• 510 connections on your e-cig. ...
• Clean the 510 connection on your vape mod. ...
• Clean the 510 connection on your vape tank. ...
• Check the 510 connection on your tank. ...
• Check the 510 connection on your vape mod. ...

Why does my vape say check atomizer?

Why Does My Vape Mod Say Check Atomizer or Is This a New Coil? Check atomizer is usually because the coil is not screwed in tightly enough or because the fir...

How to fix atomizer on vape?

• There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. ...
• You keep dropping your pen – one drop too much and you’re risking rattling the insides of your device. ...
• You’re over-tightening your atomizer – you should be gentle with your atomizer. ...

Why does my vape keep saying no atomizer?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.

How do I reset my vape atomizer?

0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I fix my atomizer in my tank?

3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate ofMoreThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate of your 510 connection. Over time the connection on your e6 can gather dust dirt and e-liquid.

Where is the atomizer on a vape?

Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.

What is atomizer on a vape?

The e-cigarette atomizer is a heating element that turns e-liquid into vapor. It is usually made up of three parts: the actual heating coil, a mesh bridge and a wick that absorbs e-liquid. The atomizer is also known as a nebulizer.

How do I clean my vape atomizer?

To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.

How do I reset my Smok vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

Why does Smok Nord 4 say no atomizer?

If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.

How much damage does the atomizer do?

The Atomizer is a bat for the Scout of Team Fortress 2. It came out as part of the Uber Update on June 23, 2011. This bat grants triple jumps but does 10 damage for each time the third jump is used.

How do I fix my cart atomizer?

0:101:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipSo what you want to do to start is unscrew your cartridge from your pen. And take a look at the twoMoreSo what you want to do to start is unscrew your cartridge from your pen. And take a look at the two connectors. There sometimes they can become too recessed of whether its packaging or being screwed

What to do if cleaning contact points doesn't fix check atomizer error?

If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

Why won't my 510 mod work?

Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.

How to clean a tank after taking apart?

Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.

How to clean a pod from a vape?

Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

Why is my mod reading the new tank correctly?

If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.

How to get vape juice out of a tank?

Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.

What does it mean when an e-cigarette says no atomizer?

An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.

What does it mean when your tank is sat flush with a rubber o-ring?

If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.

How to get a tank to pop back into the correct position?

Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.

Can a mod make a complete connection to a vape tank?

Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.

What does it mean when your mod is low?

If that’s the case, check the resistance of your coil . Each mod will fire at a certain resistance range; if the resistance of your coil is lower than that, your mod will refuse to fire it.

Why is my mod not working?

Six reasons for your mod errors (and how to solve them) 1. Coils may have a short. It could be something as simple as a bad factory coil, a loose connection on your rebuildable , or the factory coil itself isn’t properly seated or missing an insulator. Also, some people may misjudge the size of their builds, causing their coil to touch ...

Why is my mod not connecting to the 510 pin?

It could be due to any number of reasons. Some are just poorly designed and fail with time, others are faulty and make it through quality control.

Why do atomizers use peek insulators?

Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.

What does "check atomizer" mean?

One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.

What is Vaping360?

The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!

What to do if your coil doesn't work?

If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.

What does "No Atomiser" mean?

When you receive the "No atomizer" or "Check atomizer" message, it simply means that your mod does not think your tank is attached to the connection point, or more specifically, your coil or atomizer head. When you attempt to fire a mod without anything attached, you will see the same message.

Check Your Mod With Another Tank (or Vice Versa)

Although it is probably a problem related to your tank or atomizer, before you go ahead with a fix, it is a good idea to clarify the cause of the issue. Finding another mod or another tank and switching your setup is the easiest way to do this.

For Tank Issues

Most of the time when the error comes up, the problem lies with the tank. So here's what you do if there's an issue with the tank.

For Mod Issues

In the unlikely event that it’s actually your mod causing the problem rather than your tank, there are a few things you can do to rectify the issue. Generally speaking, though, if it’s a problem with your mod the fixes are more risky to perform and it might just not be possible to solve.

Get a New Mod

Sadly, certain things simply aren't fixable. For some reason, regardless of the situation, the mod may be malfunctioning or just unable to make a connection. In these instances, you might just need a completely new mod.

Why do vapers forget atomizer error messages?

They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.

Why does my vape pen leak?

There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.

Why does my mod say no atomizer?

However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.

What is 510 connection?

In short, a tank’s 510 connection is that little bit with threads that protrudes and is screwed onto a vaporizer. It has a little pin that’s movable and that carries the positive charge from the vaporizer to the atomizer. It’s that little pin that can go haywire sometimes, and fail to connect.

What does it mean when your chipset says no atomizer?

When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.