How to Fix Check Atomizer/No Atomizer On A Pod Vape
- Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
- Check Your Contact Points for Damage. If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates ...
- Reseat your Coil/Pod. Sometimes the most simple fixes are the most effective. ...
- Try Another Coil/Pod. If you’ve tried all of the above steps and nothing is working, the problem could be that your coil or pod has an issue.
Why won’t my vape atomizer work?
This is especially important here because often vapers will tighten their atomizer after receiving “no atomizer” errors. In the vast majority of times, the culprit is something else. Drops – people drop their mods like they drop cellphones.
What is the difference between a vape pen and an atomizer?
Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.
How do I Fix an atomizer short warning?
How to fix an "Atomizer short" warning: If none of the above are the issue, try using a different mod with the same atomizer. If you are still getting an atomizer short message after trying all these steps then we suggest grabbing another atty you have on hand and testing it on your mod. Make sure the atty you use is one you know that works.
Can I over tighten my atomizer?
Overtightening atomizers – people often overtighten their atomizers, to the point where they break the 510 pin out and/or snap the ground wire internally. Don’t over tighten your atomizer.
Why do vapers forget atomizer error messages?
They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.
What does it mean when your chipset says no atomizer?
When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.
How to check rebuildable coils?
For rebuildable coils, check the coil and the connection and make sure that everything is tightly screwed so it’s not wobbling when you put the top cap on. Also, check the size of your coil – if it’s too big and touches the sides, you will keep getting an atomizer error message. Build a slightly smaller coil that can fit neatly on your build deck and you should be fine.
Why does my vape pen show error messages?
When juice seeps into your circuitry, the connector, and the contact points, and it can damage them and cause your vape pen to show error messages when there’s actually nothing wrong with the atom izer.
Why is my atomizer short?
When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this. Your heating chamber and atomizer head are simply not getting the juice they need because that little computer is not telling your e-cigarette to send it there. A good idea would be to reach out to the manufacturer (or the dealer) to try to get a replacement device. Just keep in mind that some companies are better at customer service than others – often, if the manufacturer is stalling you, it’s best to cut your losses and buy another mod. Of course, before purchasing any of these high-end mods, do your research and check online to read what other vapers are saying about them.
Why does my vape pen leak?
There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.
How to fix a pin that is not making a good connection?
There are ways to fix this quickly. Simply take a paper towel – or a q-tip – put some isopropyl alcohol on it, and gently clean the point of contact. If there’s vape juice or other gunk or debris baked on there, take a paper clip and scrape it off. This should do the trick.
What does "check atomizer" mean?
One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.
Why do atomizers use peek insulators?
Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.
What does it mean when your mod is low?
If that’s the case, check the resistance of your coil . Each mod will fire at a certain resistance range; if the resistance of your coil is lower than that, your mod will refuse to fire it.
Why is my mod not working?
Six reasons for your mod errors (and how to solve them) 1. Coils may have a short. It could be something as simple as a bad factory coil, a loose connection on your rebuildable , or the factory coil itself isn’t properly seated or missing an insulator. Also, some people may misjudge the size of their builds, causing their coil to touch ...
Why is my mod not connecting to the 510 pin?
It could be due to any number of reasons. Some are just poorly designed and fail with time, others are faulty and make it through quality control.
What is Vaping360?
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!
What to do if your coil doesn't work?
If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to tell if a vape tank is fine?
Pop a different vape tank on the mod and see if it is showing the same message. If it is then we know that your tank is fine and we need to take a closer look at your e-cig.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
Why is my 510 e-cig not working?
It can be because of the 510 connection, the vape coil itself or the bits in between. If your vape mod can’t detect your atomizer head, then it cannot properly deliver power to it. So your e-cig will throw up that message to let you know that there is a problem.
Why is my vape mod showing the same message?
If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.
How to remove a tank from an e-cigarette?
Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there. Then take a cotton bud, or piece of paper towel and press it gently into the hole on the top of your e-cig.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
What are the problems with vaping atomizers?
The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.
Why does my atomizer say no atomizer?
This typically happens because the coil isn't screwed on properly, there's an issue with the 510 connection, defective or bad coil, etc.
Why is my mod coil seated loose?
If the resistance of the coil is compatible with your mod then it could be that the coil is seated loosely, defective coil, or a faulty 510 connection. So always make sure your coil is seated and screwed in tight and if it's a bad coil then replace it.
How to fix an atomizer short?
How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.
What is a RTA atomizer?
It can refer to devices containing coils or it's also used to refer to the coil inside the device. There are three types of atomizer devices: vape tanks , rebuildable drip atomizers (RDA), and rebuildable tank atomizers (RTA). These devices all use a coil that heats up and transforms vape juice into vapor.
Why does my atomizer give me a short message?
There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.
How to tell if coil is bad on vape?
If you are using a vape tank with pre-built coils then check to make sure that the coil's base is connecting to your tank base. Pull the base of the coil out slight then reassemble the tank and make sure the coil is on tight. If the coil is on tightly and still reading atomizer short then you might have a bad coil. Sometimes there could be one or two bad/defective coils so try using a new coil from the pack to see if that is the issue.
Why is there no atomizer in vape?
No Atomizer means the vape cannot use the device because the coil has not been properly screwed in. Other problems could be the 510 connection or a defective coi
Why does my atomizer keep leaking?
Atomizer low messages sometimes occur when vaping because the mod is broken . This occasionally happens, no matter how careful the user is. These issues are caused by leaking juice, overtightening the atomizers, and by dropping it.
What does low atomizer mean?
Atomizer Low means that the coil resistance is too low. Vapers who see any of these messages on their mod should stop using the vape immediately. But do not worry. These issues can be solved quickly so that the user can get back to vaping as soon as possible.
Why won't my vape fire?
If the resistance of the coil is lower than what the device can tolerate , the vape will not fire. Dry burning is one way to get around this problem because it can raise the coil’s resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires.
What to do if your vape juice leaks?
The only remedy to these issues is to take good care of the vape. If the juice is leaking onto the mod during vaping, or if it has been dropped one too many times, it might be time to consider getting a replacement.
How to make sure your screw is tight?
Screws tend to loosen over time, so make sure they are tight. Another thing to do is to make sure there is enough space between the top cap and coil. If the coil touches anything other than the posts, it will result in a short.
How to clean 510 tank?
Clean the tank using a q-tip or paper towel, making sure there is no grime around the 510 connection. Dried e-liquid, dirt, and other things can cause this warning to pop up.
How to stop e-liquid from flowing through atomizer coil?
Examine the pod. Can you see air bubbles covering either of the pod’s wicks? An air bubble can prevent e-liquid from flowing through to the pod’s atomizer coil, and if that happens, the device’s automatic temperature protection will kick in to prevent the coil from overheating. With temperature protection engaged, your device will produce smaller vapor clouds – if it produces vapor at all. Tap the pod gently to break the bubbles.
Why does my vape gurgle?
Spitting and gurgling always happen because e-liquid is in a place where it doesn’t belong. Excess e-liquid enters the pod’s atomizer coil assembly, and from there, the air pressure that you create when you vape causes the vape juice to start flowing up the pod’s airflow chimney. The extra juice causes a gurgling sound when you vape. Some of the juice may even enter your mouth. Yuck!
Why is my pod system giving me weak hits?
If your pod system is giving you weak hits because it keeps turning off and on when you puff, try covering one of the air intake vents with your finger while you inhale. That increases the pressure of the air flowing through the device, which may help the puff sensor work more reliably.
How to fix a pod that is not charging?
Begin by removing the pod from your device and cleaning the contacts as described above. Clean the contacts on the battery charger using the same method, and then try charging the device. Is your pod system not charging? Scroll down to troubleshoot that issue. If the device is charging, let it charge fully before you continue.
Why does my puff sensor not work?
Insufficient air is flowing through the pod, causing the device’s automatic puff sensor to work unreliably
Can you fix a pod vaping system?
Pod vaping systemsmay look very different from one another, but the problems that you might encounter with them are mostly the same. At one time or another, just about everyone experiences a problem like weak hits , no hits or a leaky pod – and the good news is that , with a bit of general advice, you can fix almost any of those problems regardless of which specific pod system you own. So, whether you have a JUUL that’s not hitting, a SMOK Nordthat’s giving you weak hits or a Uwell Caliburnthat’s leaking, you’re in the right place. This article will explain how to fix the most common problems with any pod vaping system.
