how to fix my vape when it says no atomizer

How to Fix Check Atomizer/No Atomizer On A Pod Vape.

• 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
• 2. Check Your Contact Points for Damage.
• 3. Reseat your Coil/Pod.
• 4. Try Another Coil/Pod.

Full Answer

What does No atomizer mean on vape?

What does it mean when it says check atomizer? If you press the firing button on your e-cig and you see the message ‘no atomizer ‘ or ‘ check atomizer ‘ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.

What to do when your vape says check atomizer?

This guide will give you all the tips you need to fix this message

• Try another vape tank or vape mod. ...
• Check your vape coil. ...
• 510 connections on your e-cig. ...
• Clean the 510 connection on your vape mod. ...
• Clean the 510 connection on your vape tank. ...
• Check the 510 connection on your tank. ...
• Check the 510 connection on your vape mod. ...

Why does my vape say check atomizer?

Why Does My Vape Mod Say Check Atomizer or Is This a New Coil? Check atomizer is usually because the coil is not screwed in tightly enough or because the fir...

How to fix atomizer on vape?

• There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. ...
• You keep dropping your pen – one drop too much and you’re risking rattling the insides of your device. ...
• You’re over-tightening your atomizer – you should be gentle with your atomizer. ...

Why does my vape keep saying no atomizer?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.

How do I reset my vape atomizer?

0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I fix my atomizer in my tank?

3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipMod. If you've done the first test and another tank on your vape mod is showing the same. MessageMoreMod. If you've done the first test and another tank on your vape mod is showing the same. Message this would indicate that the problem is with your e-cig battery or your mod. The chances are this is

How do I check the atomizer on my vape?

0:373:22How To Fix 'Check Atomizer' - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also ifMoreSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also if there is juice or dirt inside the 510. Then your device may not be able to read your tank or RDA.

What is atomizer on a vape?

Atomizer refers to the wick and coil within a vape device. The wick (typically made of cotton) draws in e-liquid from the tank and onto the coil - the element that heats the e-liquid to produce a vapour.

Is an atomizer a coil?

The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.

How long do Clearomizers last?

between one and four weeksA clearomizer/tank with a non-replaceable coil head can last from anywhere between one and four weeks (depending on frequency of use and type of e-liquid used). After this period, the coil within it will generally burn out and will need replacing.

How do I reset my Smok vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

How do I know if my vape tank is bad?

Flavor is Weak Maybe it will taste weak, or perhaps it'll have a burnt taste. Either way, if you feel like no matter which e-juice you purchase, you aren't getting a great taste, consider the fact that it's time to buy a new tank.

Do you need an atomizer to vape?

Before going further, it's important to note that all e-cigarettes need an atomizer to work. Cartomizers and clearomizers all have atomizers to vaporize e-juice. The main difference among the three is the delivery system.

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

How do I clean my vape?

In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

What to do if cleaning contact points doesn't fix check atomizer error?

If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.

Why won't my 510 mod work?

Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.

How to clean a tank after taking apart?

Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.

How to clean a pod from a vape?

Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.

Why is my mod reading the new tank correctly?

If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.

What does "check atomizer" mean?

One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.

Why do atomizers use peek insulators?

Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.

What does it mean when your mod is low?

If that’s the case, check the resistance of your coil . Each mod will fire at a certain resistance range; if the resistance of your coil is lower than that, your mod will refuse to fire it.

Why is my mod not working?

Six reasons for your mod errors (and how to solve them) 1. Coils may have a short. It could be something as simple as a bad factory coil, a loose connection on your rebuildable , or the factory coil itself isn’t properly seated or missing an insulator. Also, some people may misjudge the size of their builds, causing their coil to touch ...

Why is my mod not connecting to the 510 pin?

It could be due to any number of reasons. Some are just poorly designed and fail with time, others are faulty and make it through quality control.

What is Vaping360?

The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!

What to do if your coil doesn't work?

If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.

How to fix atomizer error?

To fix it, you will probably have to reseat the coil. Take apart the tank, unscrew the coil from the tank base and clean the bottom of the coil (at the place where it connects with the tank). Clean the contact as well. After you reassemble the tank, the error message “Check Atomizer” or “No Atomizer Found” should disappear.

How to fix a 510 pin on a tank?

Possibly, you will fix it quickly. Unscrew the base of the tank and find the plate inside the bottom section of the tank. Reveal the 510 pin by pushing that plate from inside. The 510 pin should be sticking from the bottom of the tank. If it doesn’t work, try turning the plate to screw it back.

How to check if 510 connection is sunk?

Most of 510 connections are spring-loaded, so very often, they get stuck inside. To check this, you have to unscrew the tank and look if the 510 connection is sunk. If that’s the case, the best fix for it is slightly pushing it down with the help of a screwdriver.

Why do vapers forget atomizer error messages?

They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.

Why does my mod say no atomizer?

However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.

What does it mean when your chipset says no atomizer?

When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.

Why does my vape pen leak?

There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.