Your Joyetech eGo AIO Kit comes with 2 coils. To replace your coil, press down on the cap and twist to unscrew it. The top cap is connected to the coil; simply unscrew the old one and attach a new coil.
Full Answer
How to use Joyetech ego AIO vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way. 4. Replacing the coil Your Joyetech eGo AIO Kit comes with 2 coils.
Why does my Joyetech ego AIO kit have a burnt taste?
If your Joyetech eGo AIO Kit is producing a burnt taste, this almost always means the wicking material inside the coil head has burnt due to lack of e-liquid.
Is Joyetech ego AIO UL certified?
UL 8139 was recognized by ANSI as industry standard for safer electronic cigarettes in north America. And the Joyetech eGo AIO is the first vapor pen obtained the UL certificate in the industry.
How do I use my Joyetech AIO kit?
Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2. Filling the tank To fill your tank, press down on the cap and twist to unscrew the top cap.
What does it mean when my ego AIO blinks?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
How do you take apart a joyetech vape?
0:454:00How To Clean Your Joyetech AIO [Tutorial] - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress down open up Bo I like this cuz it's simple you wanna get rid of the juice in there dump itMorePress down open up Bo I like this cuz it's simple you wanna get rid of the juice in there dump it out alright just playing this level just turn it upside down dump it. Out. Once you do that.
How do you clean joyetech ego AIO coils?
5:027:43Cleaning Your eGo AIO Coils & Preventing Burnt Hits - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe core before put it in there. They say - I say three or four just go ahead. And dump some juiceMoreThe core before put it in there. They say - I say three or four just go ahead. And dump some juice down in there.
How do I know if my ego AIO is charging?
2:424:07eGo AIO User's Guidance - YouTubeYouTubeStart of suggested clipEnd of suggested clipEmpower of conditions won't press the fire button until the indicator light is on then press theMoreEmpower of conditions won't press the fire button until the indicator light is on then press the button to shift along the color red hello green blue indigo white purple or slide off rotating a rayon
How do I reset my joyetech vape?
4:266:32Joyetech eVic-VT Use Guide Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse turn the control knob to the left. So that the original resistance is not reset. Always rememberMoreUse turn the control knob to the left. So that the original resistance is not reset. Always remember to change the atomizer mode to suit the coil material.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
Why is my joyetech vape not working?
It won't charge/the battery is dead If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable.
How do you unclog a vape coil?
The ingredients in the device are thick and sticky while cool, but they become runny again with just a little bit of heat. This means you can easily clear the vape by blowing into it or giving it a couple of quick blasts on the heat to melt the contents clogging the airway.
How do you fix a burnt coil?
Prime your coils: stop the burnt hitsTake a new coil out of the box.Drip some e-liquid on the wicking holes and inside the coil head (3-4 drops will do)Assemble your tank and fill it with ejuice.Screw your tank on your mod and set aside for 10 minutes.More items...•
How to use Joyetech AIO?
Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2.
What to do if Joyetech AIO battery is dead?
It won't charge/the battery is dead. If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable. If you have a spare kit, try charging the spare to rule out a faulty charger.
How to clear out e-liquid from a tank?
To clear out any excess e-liquid from within the coil head simply unscrew the top cap and coil, hold a piece of tissue under the coil and blow through the mouthpiece a few times. Make sure that the tank hasn’t been left upside down or horizontally for a long time, as this can cause e-liquid to leak.
How to fill a e-liquid tank?
To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid directly into the tank, making sure not to fill above the max fill line (2ml). If you fill your tank above this line, you'll find that the tank overflows when you try to replace the top cap and coil.
How long does it take for a vape to sit?
This happens when you attempt to vape when the tank is empty, or when you don't realise the e-liquid level has run low, or if the coil hasn't been primed (after refilling, drip a couple of drops of e-liquid into the coil, then allow the tank to sit for 10-15 minutes once the coil is in place).
How to turn on a vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
Can an e-cigarette kit leak?
1. It's leaking#N#All e-cigarette kits can be prone to leaking, but given the right care and maintenance this can be avoided. Here are some tips that may help you avoid a leaking clearomizer:
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
Is vaping safe?
Vaping is an easy and safe way to consume your cannabis, that’s why more and more people are turning to this method as opposed to smoking it. However, there’s always that fly in the ointment that keeps you from having a great time when vaping.
Edna
Short of not mentioning that you did charge it fully (which I assume you did)
Edna
My AIO only gets rare use but I love it for running to the grocery store or for a night at the movies. The pen styles with built in batteries really don't last that long if they're your main vaping device. I have quite a few different devices and my Kangers and eleaf pico are my favorites. You'll not go wrong with either one.
FXRich
I may be a little biased because all my mods are Kanger, but I think the Kanger Subvod is a great pen style starter device, the wide range of coils make it capable of pretty much any style of vaping. I have 2 of them which I use almost daily, and they fit nicely in my pocket.
Edna
Yes i searched this thing aswell ,couldnt find a solution for it.. Someone said clicking it with a pen would reset the vape
Edna
We try to help around here...It's funny how people find this forum like you did with a problem of one type or another then they wind up sticking around. (I did it too) This is probably the nicest group on any forum I've ever found.
Jimmy Stromboli
I have the fix for the AIO pen and Cubs. It's a bad ground connection caused by the screw cap (male) and base (female) threads. Clean and scrape all corrosion with a eyeglass screwdriver.
Sunnylilfox
Another thing that can help that I have discovered with this forum. Because I have tried all these steps I eventually got curious and consecutively pressed a small pin into the bottom "reset button" a few times (probably like 10 times) this fixed my problem and I was able to hit my vape again.
Why is my vape pen blinking?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
How to keep atomizer from spinning?
Once you get the atomizer screwed onto the threads, the atomizer will just keep spinning the child-lock once it gets tightened to a certain degree, so at that point you need to push down on the child-lock ring on the top while simultaneously screwing the atomizer on tight.
How much liquid do you need to atomize a vape?
You will need to prime your atomizer with e liquid for it to get saturated before you start vaping, for this atomizer you need to drip 5-6 drops of e liquid directly down the small hole at the top of the atomizer itself.
Can you use a vape pen without an atomizer?
Some people are a fan of one or the other and some people can't notice a difference so just go ahead and try them both out to see how you like them. Your vape pen should come turned off without an atomizer installed, you will need to turn it on, install a primed atomizer and fill it up with e-liquid to begin vaping.
Can you put a vape pen under water?
If you we're using a very potent flavor feel free to use a damp paper towel instead, just make sure to not put the vape pen under water as it is not water proof. As long as you remember to clean your AIO occasionally and replace the atomizer regularly, you should be vaping happy for awhile.
What you get with the ego AIO kit
It comes in five different color options (Silver, Black, Black-Grey, Black-White, and White-Red) and it also has a multi colored LED notification light which you can adjust to your personal liking.
Features of the eGO AIO pen vape
The Joyetech eGo AIO is a very simple device and it's made of four parts – the body (which incorporates the glass section of the tank and the battery), the coil, the top cap (which incorporates the base) and the drip tip. We do get a big rectangular firing button on the middle of the device and a micro-USB charging port on the back.
Performance and thoughts on the eGO AIO kit
To me, this is a perfect beginner's starter kit which delivers great flavor, nice clouds and a good throat hit with 6mg or higher nicotine juices. It's very accessible and it's a clear competitor for the Endura T18 from Innokin. If you're looking for a nice all day mouth to lung vape, then the Joyetech eGo AIO might just be the perfect kit for you.
Update: October 2018
We have just received for review the eGO AIO 10th year anniversary edition. This device is very similar to the original ego AIO in terms of battery, coils, tank capacity and overall experience.
Rating of the Joyetech Ego Aio
Former pack-a-day smoker, I discovered electronic cigarettes back in 2011. Since then vaping has slowly turned into my hobby and my full time job. I’ve tested hundreds of e-cigarettes and mods across the years and constantly used my knowledge and experience to help others make the switch.
