Luckily, it's a simple fix! Unscrew your cartridge or charger from the battery and click the button 5x to turn it off. Use a cotton swab to scrub the connection point of the battery and the bottom of the cartridge.
Full Answer
How to fix a vape pen that won’t fill?
Unscrew the vape pen heating chamber. The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place. Letting the pen warm up first helps loosen any residue.
How to fix my vape cartridge is clogged?
Problem #6: My Vape Cartridge Is Clogged 1 Gently Blowing into the mouthpiece 2 Heating the cartridge using a blow drier set at a low temperature, or rubbing the cartridge in between your hands. 3 Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. 4 It also helps to regularly clean your cartridge.
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
Why is my aspire vape pen leaking?
Here’s a short science explainer on why your Aspire vape pen may be leaking: Why is my vape spitting? Your vape spitting liquid out of the chimney through the mouthpiece is usually a sign that you have flooded the coils. Take your device apart and remove any excess e-liquid from the centre post.
How do I get my Aspire vape to work?
0:221:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why is my vape on but not working?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
Why is my Aspire vape blinking?
Most standard e-cig batteries flash, generally rapidly, in an effort to let you know they're running out of power. The Aspire K3, as an example, will flash blue when the fire button is pressed but nothing will happen when it detects the wrong coil.
Why is there no smoke coming out of my cart?
Condensation Buildup. The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit.
Why won't my vape pen heat up?
If your pen's atomizer isn't heating, first to make sure that your battery is charged and turned on. Then check the connection between the battery and your atomizer or cartridge. If it is dirty, clean it with a cotton swab. You will also want to make sure this connection isn't overtightened.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
Why is my cart not hitting on my battery?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you fix a blinking vape battery?
Check the Vape Pen Connection. When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
What to use to remove clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick.
Why does my vape wick burn?
Burnt Taste - Like with e-liquid atomizers, when you vape an oil atomizer with no oil inside, or do not let it properly soak up enough oil between hits, you can burn the cotton wick. This can also happen if you have the watts up too high. Once burned, every hit will carry a tainted taste. The only way to resolve this is to change the coil, if possible. Otherwise, always use caution and do not hit the atomizer with too many watts or without letting it absorb enough oil.
What are the problems with vapes?
Some common issues that can be found across all devices are the atomizer not firing, sticky messes from a leak, and a burned taste. Below you will find a list of these common issues and how to rectify them. If none of the solutions work, you may have a faulty vape that needs replacement.
Why isn't my atomizer working?
Atomizer Not Working / Check Atomizer Error - If your atomizer isn’t working or you get an error, then be sure it is screwed to the battery properly. It should be snug, but you don’t want to over tighten it as that can cause more problems. Some box mods detect the type of coil attached and won’t fire if the watts are set to a number higher than the attachment can handle. Ensure you are using the appropriate wattages. The coil may also be fried and need replacing. To ensure the problem is not with the box mod itself, try using the atomizer on another battery if possible.
Why does my vape coil taste bad?
However, your coil can produce a poor taste during the end of its life. If you notice a buildup of gunk on your coil and it is putting out a foul taste, that means it is time to replace the vape coil. A new vape coil will bring back the pure taste from the wax.
Why is it so hard to pull a hit from a vaporizer?
Difficulty Pulling/Taking a Hit - If you are having trouble pulling a hit from the vaporizer, the screen in the atomizer may be clogged and need to be cleaned or replaced. This screen prevents the contents of the atomizer from coming up through the mouthpiece and tends to get clogged from time to time.
What are the problems with wax vaporizers?
Each one will work a little differently, so a problem may be specific to a certain device. However, common issues such as sticky parts, coils not heating, and poor tastes can be found in any model. In this section, we will go over the most notable issues people have with wax vaporizers and how to resolve them.
Why won't my coil heat up?
Coil Won’t Heat - If your coil won’t heat up, first ensure it is properly attached to the battery. If that doesn’t resolve the issue, the coil may need to be replaced as they will burn out over time. Coils are powerful yet fragile wires that, like all things, break down after a lot of use. To prolong your coil’s life, be sure not to overpack your atomizer or poke the coil when loading it with wax. If you’re using a box mod, avoid setting the watts/temperature too high as this can also burn the coil out faster.
How to fill an Aspire vape tank?
Some Aspire tanks fill from the top, and others fill from the bottom. Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping. Fill and reassemble tank. If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in.
How Do I Clean My Aspire Tank?
It also removes residue from the mouthpiece and clears out the air vents. You can clean your Aspire tank by disassembling it and swishing it in warm water. If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
How to change coils on Aspire Revvo?
You’ll see the cone-shaped retaining nut that holds the coil in place. Twist off the retaining nut and lift the old coil straight up to remove it from the tank. drop in a new coil, ensuring that the o-ring on the side of the coil lines up with the tank’s glass. Replace the retaining nut and top hardware. Invert your mod – or place it on its side – for a few minutes to wet the cotton on the underside of the new coil.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to fix a vape pen that won't work?
Replace the heating element if the pen still doesn’t work. Your first option is taking the pen to a professional vape shop. Sometimes an experienced professional can find a way to repair it. If not, either get a replacement pen or purchase a new heating coil. Having a professional repair an old pen is often cheaper than replacing parts, and getting a new heating element can spare you from the cost of buying a whole new pen.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to find battery in a pen?
Take apart the pen to look inside the heating chamber. Unscrew the mouthpiece from the pen again. Continue removing pieces until you are able to see the wire coil inside the heating chamber. It will be right above the lowest section, which contains the battery.
How to get rid of metal wires?
Use a magnet to remove metal wire fragments. This can happen when you install your own wires. Get a small magnet from a home improvement center or hardware store. Move the magnet around the heating chamber and coil to attract any loose fragments that could be causing a short. Peel them off the magnet, throw them away, then test your pen.
What happens if a pen doesn't work?
If it doesn’t work, the pen may need more cleaning or the wire may be out of place.
How to replace heating element in pen?
Usually the replacement is a whole new heating element, so all you have to do is unscrew the old one and affix the new one by hand.
How to recharge a disposable vape pen?
With that said, it is possible to recharge a disposable vape pen’s battery by disassembling the vape and connecting the positive and negative terminals of the battery to the exposed positive and negative wires of a stripped-down charger.
What to do if all else fails vape?
If all else fails, it may be time to throw in the towel and simply buy a new vape.
How to Fix Your Not Charging Vape?
In most cases, recharging a vape is as simple as plugging it into the appropriate charger and waiting a while.
How to get your vape working again?
If you have determined that the batteries your mod came with are faulty by testing them using another device, replacing the batteries with new ones is the simplest way to get your vape working again.
Why is my vape not charging?
If your vape isn’t recharging as it should, it often means that some internal component within the vape is damaged.
Why is my vape not producing vapor?
If the LED at the bottom of your vape is coming on, but the device is not producing any vapor when you hit it, this means that the batteries are functioning properly but are not transferring power to the vape’s cartridge.
What is a vape mod?
Vape Mods are devices that feature tanks that can be filled and refilled with any e-liquid of your choice.
What to do if you have no changes on your vape pen?
If you’ve been clicking the appropriate amount of times but have still seen no changes, you may need to check your charging cable. It is easiest to do if you have another vape pen handy to test it on.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
Why does my pen tank flood?
Several things can cause the tank to flood. Inhaling too hard, shaking your pen like a polaroid, and plain old overfilling are the most likely culprits.
What to do if your charger is connected?
If it is connected, you may need to order a new charging cable. A technician may help you determine the exact cause and avoid purchasing unnecessary extra accessories and components.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
vgodbabyy Full Member
so I have an old aspire pockex that I’m trying to get to work. It doesn’t fire or anything, yet the fire button lights up blue when I hold it down. Is it just a connection issue? How do I fix this? The battery is fully charged and has been for quite some time now
OhmAlone Full Member
Is it possibly locked? Try hitting the fire button five times and then try
Baditude ECF Guru ECF Veteran
The only thing I can think of is the battery is old and no longer holds enough charge to fire a coil. Or the chip is malfunctioning. If you have a new coil, try that.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
