1- Download Firmware and update file https://www.voopoo.com/service 2- Install firmware and open it 3- Disconnect batteries from vape THEN connect it to your computer 4- open downloaded update file on firmware and download it to your vape 5- if that doesn't work contact customer support as you have a defective motherboard
Full Answer
Are You having issues with your voopoo vape device?
More and more vapers got the voopoo vape devices, so may be some got the issues, today let’s check the issues and learn how to fix. the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.
Why is my voopoo Vinci vape leaking?
B) Cracked plastic: If your VOOPOO VINCI pod vape kit was dropped, or if it was in a pocket or purse that got bumped around a lot, it’s possible for the plastic to have broken and cause your VOOPOO VINCI to leak.
How do I Fix my voopoo drag X that is leaking?
Simply plug your unit into a Type-C USB charging port using the provided cable and wait approximately one hour for your device to charge. If your VOOPOO DRAG X is leaking there are a few things that you should be looked at in order to stop the leaking.
Do I need a coil for my voopoo pod system?
A) Coil Installed incorrectly (or not at all): The VOOPOO VINCI pod system ships without a coil installed. Be sure to install a coil before using your device. The coil is also ‘push fit’ into your pod – so you don’t need to screw it in at all.
Why is my Voopoo vape not working?
If the Voopoo Find S doesn't work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn't working, an error message should appear on the screen.
How do I fix my Voopoo drag vape?
If you're unable to vape with the Voopoo Drag Max, you should first try unlocking the device by pressing the fire and “+” buttons simultaneously....Voopoo Drag Max Not VapingIf the error message is “Check Battery,” you need to recharge the device.If the error message is “Temp High,” the Voopoo Drag Max has overheated.More items...
How do you reset a Voopoo vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you get Voopoo to work?
0:362:23VOOPOO DRAG S POD KIT Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply pull the pod from the device which is secured via magnetic connection. And either push inMoreSimply pull the pod from the device which is secured via magnetic connection. And either push in your new coil like so or pull out an existing coil which will want interchange.
Why is my Voopoo Argus not working?
If your Voopoo Argus Air isn't vaping, the first thing that you should do is make sure the device isn't turned off. Press the fire button five times. If that doesn't resolve the issue, connect the Argus Air to your computer until the battery is fully charged, and then try vaping again.
Why is my Voopoo drag locked?
Resistance range under Super Mode is 0.1-0.312. time for 1.5 Seconds, it will be locked. Press the up and fire buttons simultaneously will unlock the device.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Why is my Voopoo Vinci pod not working?
My VOOPOO VINCI is not firing when I push the button VOOPOO VINCI pod system kits are shipped in a locked position. In order to unlock your device, simply click the 'power button' three times quickly. This will unlock your VOOPOO VINCI. The other possible problem is that it is not charged.
How do I reset my Voopoo mojo?
On the base of the mod is a “System Reset” button – I have seen a few mods starting to use these – this will reset the system if an error occurs. With removable battery mods you would just take the batteries out but obviously this has an internal battery. It is a colourful little fella to say the least!
How do you unlock a vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you unlock a vape?
How do you clean a Voopoo vaporizer?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...•How to Clean Your Vape Tanks and Coils - Vaping360https://vaping360.com › learn › how-to-clean-maintain-y...https://vaping360.com › learn › how-to-clean-maintain-y...Search for: How do you clean a Voopoo vaporizer?
How do I unlock my drag vape?
- Lock / Unlock = Press the Fire button and '+' (up) button simultaneously. - Mode Switching = Quickly press the fire button 3 times.How To Use The VOOPOO Drag S Kit - Ecigwizardhttps://www.ecigwizard.com › pages › how-to-use-voopo...https://www.ecigwizard.com › pages › how-to-use-voopo...Search for: How do I unlock my drag vape?
Why does my vape taste burnt?
If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.
How often should I replace my vape coils?
Its best to replace your VOOPOO VINCI vape coils every 2-4 weeks.
Can you fill a pod with e-liquid?
A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.
Do you need to screw a coil in a pod?
Be sure to install a coil before using your device. The coil is also ‘push fit’ into your pod – so you don’t need to screw it in at all. Sometimes if the coil is misaligned and not sitting fully into the pod system, it can leak from the bottom of the coil.
Why is my Voopoo Drag X not firing?
This is a surprisingly common issue that customers have and one of the easiest to solve. The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly.
How does vaping work?
Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour. If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers. For all types of vaping, slow long drags are recommended.
Can you leave vapes in a car before flying?
It is best to empty all vaping devices before flying on a plane. G) Over Heating: If you leave any vape in a vehicle in the summer or in direct sunlight, it could leak. Over heating the device can cause the e-liquid to expand pushing it out through the coil and out the mouthpiece, causing it to leak.
Why does my vape stop working?
Other Issues That Cause a Vape to Stop Working. In general, a long list of problems can be caused by poor maintenance of your device. Just like any other piece of machinery, your vape device needs to be properly taken care of in order to function well.
What to do if atomizer doesn't work?
If that doesn’t work, check to make sure your atomizer coil isn’t dry, and that the atomizer itself isn’t flooded. Finally, make sure that the electrical connection between the atomizer and battery appears to be functioning correctly, cleaning off any dust or grime that may have built up.
Why does my e juice leak?
One of the top causes of leaking e-juice is a seal that is either cracked, missing, or just misaligned . Your device has several different seals, so examine all of them to see if you notice any crimping, damage, or looseness. Replacing these is an inexpensive fix, and can solve your leak problem altogether.
chris539 New Member
Hey guys. I recently got a voopoo vmate from a friend and changed the pod because the coil was burnt and the vape didn’t seem to be working right because of this. Upon changing the pod, the vape only occasionally hits and for a couple seconds before cutting off. The light then flashes red before flashing white after and continues to flash white.
CloudyFutures Moved On ECF Veteran
Hey guys. I recently got a voopoo vmate from a friend and changed the pod because the coil was burnt and the vape didn’t seem to be working right because of this. Upon changing the pod, the vape only occasionally hits and for a couple seconds before cutting off. The light then flashes red before flashing white after and continues to flash white.
