If it says 'check atomizer,' it means the battery/mod can't read the coil, i.e. it can't fathom the resistance, or it detects a problem. Here are some suggestions for resolving this vexing issue. Step One - Clean all contact points Remove the tank (or pod, if you have one) from your computer and clean all threads and connections carefully.
- Clean Your Contact Points. The first step you should try if your pod vape isn't firing or says check atomizer is cleaning out your contact points. ...
- Check Your Contact Points for Damage. ...
- Reseat your Coil/Pod. ...
- Try Another Coil/Pod.
What does No atomizer mean on vape?
What does it mean when it says check atomizer? If you press the firing button on your e-cig and you see the message ‘no atomizer ‘ or ‘ check atomizer ‘ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
How to fix atomizer on vape?
- There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. ...
- You keep dropping your pen – one drop too much and you’re risking rattling the insides of your device. ...
- You’re over-tightening your atomizer – you should be gentle with your atomizer. ...
How to fix 'check atomizer'?
How to Fix Check Atomizer/No Atomizer On Your Vape Mod. How to Fix Check Atomizer/No Atomizer with a Vape Tank 1. Try Another Tank/Mod. This is the best way to know if there’s truly a problem. If you have another tank handy, you can try doing a switch. Take the tank off of your current mod and replace it with another tank.
How to clean your vape atomizer?
The cleaning agent rinse
- Baking soda is a good cleaning agent that can be used to get tanks sparkling again.
- Ethanol, aka grain alcohol, is yet another highly effective substance for cleaning. ...
- Cheap Vodka is not a household item, but chances are you can find it at the grocery store. ...
How do I fix check atomizer Vaporesso?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do I fix my short atomizer Vaporesso?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I reset my Vaporesso?
0:040:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I fix my atomizer in my tank?
3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipMod. If you've done the first test and another tank on your vape mod is showing the same. MessageMoreMod. If you've done the first test and another tank on your vape mod is showing the same. Message this would indicate that the problem is with your e-cig battery or your mod. The chances are this is
Why does my Vaporesso says check atomizer?
“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
What does short atomizer mean on Vaporesso?
Atomizer Short or Short Circuit When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil.
How do you get Vaporesso to work?
Load the tankDisassemble Your Tank.Fill Dropper With e-liquid.Squeeze a drop of e-liquid into each cotton hole.Screw coil into airflow base.Fill tank but avoid the middle hole.Disperse e-liquid along the inside of the tank.Screw airflow base back onto tank with the battery end down.Wait for 5-10 minutes.More items...•
How do you clean Vaporesso?
How to clean a vape tankStep 1: Empty out the tank. Depending on the design of your device, remove either the top or base of your clearomizer and empty out any e-liquid still in the tank.Step 2: Rinse away remaining e-liquid. ... Step 3: Let the tank dry.
How do u unlock a Vaporesso?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
Why is my Vaporesso not working?
Vaporesso Xros Not Hitting If nothing happens, charge the battery. If the Vaporesso Xros still isn't hitting, watch the LED indicator; it should blink to tell you what the problem is. If the light blinks three times, there is a problem with the battery. Make sure that the device is fully charged.
What part of the vape is the atomizer?
The Coils—Vape coils are part of the atomizer and may be referred to as “atomizer heads.” When you press the vape button, your coil will begin to power and heat up, vaporizing the liquid within a wicking material inside the atomizer.
Is an atomizer a coil?
The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.
1. Bad coil connection
If you are using a sub-ohm tank, then it is possible that your coil was inserted incorrectly, or it was just not tight enough. So simply re-insert it. Sometimes it’s just as simple as that!
2. You are creating a short
If you are using a rebuildable tank, make sure your build is not touching the cap or any other metal piece of the deck. Also make sure your coil is in good shape and there are no breaks.
3. You have a faulty tank or coil
Sometimes there is nothing wrong with your mod and the issue well might be in your tank. So try to screw a different atomizer in. If your mod is now able to fire the new atomizer, then you know who to blame! For sub-ohm tanks with pre-made coils, sometimes, you just get a bad coil. Try using a different one from the pack.
4. There is no connection
Clean the 510 thread of your mod and the 510 pin of your mod. Maybe there is just something stuck in between. If this does not work, maybe the lack of connection is related to your coil.
How to clean a tank when it is apart?
When your tank is apart, unscrew the coil from the base of the tank and clean the bottom of the coil where it screws into the tank and makes contact. You’ll also need to do the same to the tank, ie clean the area inside the tank where the coil sits. When clean and dry reinstall the coil and reassemble your tank.
Can you use a sub ohm battery on a mod?
Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
Why do vapers forget atomizer error messages?
They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.
What does it mean when your chipset says no atomizer?
When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.
Why does my mod say no atomizer?
However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.
Why does my vape pen leak?
There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.
What does "check atomizer" mean?
One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.
Why do atomizers use peek insulators?
Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.
What does it mean when your mod is low?
If that’s the case, check the resistance of your coil . Each mod will fire at a certain resistance range; if the resistance of your coil is lower than that, your mod will refuse to fire it.
Why is my mod not working?
Six reasons for your mod errors (and how to solve them) 1. Coils may have a short. It could be something as simple as a bad factory coil, a loose connection on your rebuildable , or the factory coil itself isn’t properly seated or missing an insulator. Also, some people may misjudge the size of their builds, causing their coil to touch ...
Why is my mod not connecting to the 510 pin?
It could be due to any number of reasons. Some are just poorly designed and fail with time, others are faulty and make it through quality control.
What is Vaping360?
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!
What to do if your coil doesn't work?
If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.