SMOK Stick Prince Coil Change The SMOK Stick Prince coil change is standard to all Sub-Ohm systems. First, unscrew the top of the tank and disassembly the glass. Once the glass is removed, screw out the old SMOK V12 Prince coil, and screw in the new coil.
Full Answer
What should I do if my Smok vape won't turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: 1 Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to... 2 Check the battery to confirm that it’s properly inserted. Depending on your model, you might be able to pull out the... More ...
Why does my vape say Smok?
Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety. The cause of these two messages is a short circuit in either your mod or tank, which is a serious but sometimes repairable problem. Here’s what to do if you receive one of these errors:
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
How do I fix the prince Smok stick?
To resolve this, take the device apart and first clean the 510 connections. Next, make sure the coil is screwed on tight (not to be mistaken for over-tightening) and see if you can get it to make contact. If nothing works, it's probably a faulty battery.
Why is my Smok stick Prince blinking?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
Why is my Smok stick 80w not turning on?
If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How long does a Smok Prince stick last?
The Smok Stick Prince battery has a capacity of 3,000mAh, which is really impressive for this type of vaping system. While using the Prince exclusively, I got about 6-7 hours of use out of it, before the LED indicator let me know it was time for a recharge, which is not too shabby for a stick device.
Why does stick Prince blink 15 times?
Normally blinking four times each time you take a puff, it will blink fast 15 times to indicate that the voltage is lower than 3.3V, which means it's time for a charge.
Why does my SMOK blinks 4 times?
Short circuit protection: If the LED detects a short circuit, it will flash 4 times and the battery will automatically shut down the output. Low voltage protection: When the battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How do I reset my SMOK?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you turn on a stick Prince?
To use the SMOK Stick Prince, you attach the TFV12 Prince tank to the battery, fill your tank with e-juice, let it saturate for a few minutes. Then you turn the device on by clicking the firing button five times, which will then turn on the LED indicator lights.
How much does a Smok stick prince cost?
SMOK Stick Prince with TFV12 Prince Tank Starter Kit $27.89 Vape Pen - EJuice Connect.
How do you take apart a prince Smok stick battery?
1:286:09smok stick 80w remove battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i cut those you could desolder them but i thought i'd cut them leave a little tag on there so iMoreSo i cut those you could desolder them but i thought i'd cut them leave a little tag on there so i know which way around they go. And then it will split up and there's your battery.
Why is my Smok stick Prince getting hot?
The most common cause of a hot vape: Chain vaping/hot coils It all comes down to the fact that part of your mod or vaping device is literally designed to get hot. Electricity going to your coil and heating it up is what turns your e-liquid into vapour.
SMOK Stick Prince Battery
The SMOK Stick Prince has an integrated battery with 3000mah and can last for a day for vaping. The chipset will adjust the voltage output naturally between 3.4v and 4.2v, so you don't have to make any complicated adjustments.
SMOK Sick Prince Tank
The SMOK Stick Prince is paired with the massive 8Ml SMOK TFV12 Prince Tank with a new button-lock hinged top-fill, smooth dual bottom airflow control, and the V12 Prince coil system. In addition, the SMOK Stick Prince features the swivel-style top cap with an unlock button that you have to press to unlock the cap.
SMOK Stick Prince Manual
How to use SMOK Stick Prince? The SMOK Stick Prince manual is standard for vape pens with a one-button operation. To turn the Prince Stick on, press five times on the power button. If you need to turn the device off, press the power button five times again. Once Prince Stick is on, press and hold the power button and enjoy vaping.
SMOK Stick Prince Charge Time
The SMOK Stick Prince charge time is different when charging the device and can vary 2-3 hours. This is because the SMOK Stick Prince charge time mostly depends on the AC/USB adapter connected to the battery.
Stick Prince Leaking
The SMOK Stick Prince is leaking, most likely the failure with the coil. Try to replace a new coil, clean the device if it’s covered with the e-liquid, and check if it’s leaking with the new coil.
SMOK Stick Prince Coil Change
The SMOK Stick Prince coil change is standard to all Sub-Ohm systems. First, unscrew the top of the tank and disassembly the glass. Once the glass is removed, screw out the old SMOK V12 Prince coil, and screw in the new coil.
SMOK Stick Prince Review Conclusion
If you are tired of using VV devices or feel it is difficult to use them, try such an all-in-one starter kit like SMOK Stick Prince, which is simple to use as an entry-level vaping device but with the performance of an advanced one and at a very appealing price!
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.