Why is my aspire vape not producing vapour?
Taking a draw with a fully charged and seemingly working device only to produce no vapour is an annoying one of the Aspire vape problems, to say the least. This could be down to a couple of problems. Make sure you check that everything is connected tightly.
Why did my aspire Evo 75 atomizer stop working?
The "low res" on your screen says that the atomizer's resistance level went lower than what your mod can accommodate (use safely), which is why it stopped working. The coil inside will start at a certain level but will go down as you use it so this is normal. Since I'm not familiar with the Aspire Evo 75, have a look at this video.
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do I replace the coil on my aspire Revvo atomizer?
Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time. The Aspire Revvo tank has a unique design and an unusual method for replacing coils. To get started, twist off the tank’s top hardware. You’ll see the cone-shaped retaining nut that holds the coil in place.
How do I fix the low resistance on vape?
Low Resistance Dry burning is one way to get around this problem because it can raise the coil's resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires. If using a factory coil, either a new coil or vape is needed.
What does res mean on a vape?
If you're drawing on your vape, and you see a blinking red light, that means it's time for you to recharge your battery. It's important to charge with the proper voltage designed for your vape battery. If you can try to use the charging ports that your vape pen came with to prevent any unexpected charging snafus.
How do I clean my Aspire vape tank?
Carefully and thoroughly rinse each Nautilus part with warm tap water, then place the rinsed part in the washing container and soap solution. Cover the washing container with its lid. Gently agitate the washing container for two minutes, let the container sit for five minutes, then gently agitate again for two minutes.
How do you change the coil on an Aspire Plato?
2:218:40Aspire Plato - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere is a specific order in which to change the nortis coil unscrew. The top collar first thenMoreThere is a specific order in which to change the nortis coil unscrew. The top collar first then unscrew the Nautilus. Coil.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
Can you put water in a vape to clean it?
Water is a great way to wash off some of that old gunk and congealed e-liquid that's polluting your vapour. First, you'll need to empty your tank if it isn't already. Then, you'll need to fill up a bowl or cup with warm water (or microwave it).
Is it OK to wash vape coils?
As every experienced vaper will tell you, cleaning your coils prolongs their lifespan. By extension, keeping your coils clean means you will keep your overall vaping costs down as you are not forced to make replacements as frequently as you otherwise would.
Can I put water in my vape tank?
The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.
mfhayes
I recently purchased an Aspire Evo 75 Kit (its the first vape I've purchased) and i was using it last night for the first time and it worked for about an hour and all was well. After a little while it started saying "Low Res" on the screen when i hit the fire button and wouldn't hit anymore.
blecchi
I came across this thread when looking for solution for the LOW RES problem on the NX75/EVO75. I started suffering from it after I had dropped my mod by accident. I'm posting my solution here in the hope that it may help others.
moosevape
thanks for the info,ive been searching everywhere for a fix for the very same issue,came across this thread and followed youre instructions and hey presto my evo75 is back up and running with no "low res" fault showing up
Philthy Phil
I had been looking to solve this same problem all over the web for months and you have come to the rescue, Excellent!!!
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
What is the Aspire Plato?
Meet one of the newest members of the Aspire family, the Aspire Plato! The Plato is a multifunctional personal vaporizer and tank system that fits in the palm of your hand! With an adjustable airflow system, the Plato brings you temperature control and the standard wattage mode up to 50 watts. This revolutionary device also comes with a variety of different coil options so that you can find the perfect style that fits you. Whether you’d prefer a mouth-to-lung or a direct-to-lung experience, no worries! The Plato has you covered.
How to adjust the airflow on a plato?
To adjust, simply twist the notch on the bottom of the device.
How many juice ports does Plato have?
The Plato has a revolutionary tank system that brings you two juice ports that makes filling, draining, and cleaning simple and convenient! The top port allows the user to both fill and drain the tank of ejuice. Open both of the ports to drain the tank completely.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace glass in Aspire Triton?
To replace the glass, disassemble your tank and remove any glass fragments with tweezers. Push gently to get the replacement glass sleeve into position and reassemble the tank. Note that in the Aspire Triton, the glass is a permanent part of the upper hardware.
Cboswell87 New Member
I purchased an Aspire Plato kit a little over a year ago. I never had any issues with it except some occasional leaking at the bottom where the airflow vent is. I haven't used it in about 4 months, but decided to bring it out to start vaping again. A week ago it had a slight charge and was able to flash a low battery message on the screen.
stols001 Moved On ECF Veteran
Not really. Sounds like you've tried the obvious solutions. Although, since you've had leaking, I might look at cleaning the battery terminals, and whatever you can get to inside the mod. There may be some ejuice clogging up some areas in your mod. If you clean it then leave it open for a day or so to dry out.
Topwater Elvis Vaping Master ECF Veteran
The plato uses a removable 18650 battery, have you checked the voltage?
Eskie ECF Guru Verified Member ECF Veteran
Yeah, don't assume anything until you at least remove the current 18650, wipe the contacts down, and try another battery. If is this your primary vape, then over a year you might well have used that enough to the point it will no longer hold a charge. These batteries are good for anywhere around 300-500 cycles.
BrotherBob ECF Guru ECF Veteran
I purchased an Aspire Plato kit a little over a year ago. I never had any issues with it except some occasional leaking at the bottom where the airflow vent is. I haven't used it in about 4 months, but decided to bring it out to start vaping again. A week ago it had a slight charge and was able to flash a low battery message on the screen.
