Fortunately, it’s possible to fix that problem with a little ingenuity – and a pair of tweezers. This solution may not work with all disposable vapes, but it will work with many vape pens using the rectangular “puff bar” design that has become so common recently. Using a pair of tweezers, pry the mouthpiece off of your disposable vape.
- Try a different USB cable. ...
- Try a different computer or a different USB port on the same computer. ...
- Make sure that the battery is secure and installed with the correct orientation. ...
- Replace the battery if none of the above solutions work.
Does geekvape say no coil detected?
Since there are tons of GeekVape customers being affected by this GeekVape No Coil Detected warning, and unfortunately, a lack of customer support, Guide To Vaping feels the need to do what it does best, which is to provide vaping content that’s designed to help vapers.
How to fix a disposable vape device that won’t turn on?
Add some e-liquid to the pod and reassemble the device. If your disposable vape has a fiber-based filler material inside, you’ll need to remove the filler material from the device and re-saturate it with e-liquid. When the filler is wet again, you can reassemble the device and resume vaping.
How do I Fix my vape that won’t puff?
If you cover one of the device’s intake vents with your finger while puffing, you’ll increase the pressure of the air flowing through the disposable vape. That may get the puff sensor working again.
Is geekvape safe to use?
Geekvape, as one of the worldwide best vapor brands, produces vape innovation and creates best user experience for e-cigarette industry. From starter kits to the most durable vape mods to leakproof cloud-maker tanks, vape a healthy life with Geekvape. WARNING:This product contains nicotine. Nicotine is an addictive chemical. Only for adults.
Why isn't my geek vape working?
Geek Vape Aegis Solo Not Working If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.
How do I reset my aegis Geekvape?
On/Off : 5 clicks of the fire button. Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Brightness Up: Press and Hold Fire & + button.
Why is my geek vape not charging?
If the Geek Vape Aegis Hero doesn't start charging when you connect it to your computer, the most likely reason is that the USB cable has a problem. You probably have several micro USB cables lying around the house and can use one of your extra cables to charge the Aegis Hero.
Why is my geek vape flashing red?
If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2. If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How do you fix a vape that won't turn on?
Try the following:Check if you've pressed the power. Check if you've pressed the power button too often and turned it off. ... Check if you need to charge it. ... Check for connection issues. ... Check our Battery Safety page. ... Check your atomiser. ... Check your 510 pin. ... Check your coil. ... Check your tank isn't over tightened.More items...
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
How do you fix a disposable vape that won't charge?
Switch out the charger provided with any similar charger. As mentioned above, faulty chargers are the number one cause of issues in vapes. So you can try using a different charger or plug it into another outlet to see if it charges.
Why is my geek bar flashing?
There are no buttons to press and each bar has a light on the base. Once the light flashes on and off continuiously, the battery is spent and you simply dispose of the device and buy another.
Why is my cart not hitting on my battery?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why is my vape flashing 3 times and not working?
Battery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to clean a solid connection?
Use alcohol and clean the bottom connection to ensure there isn’t any debris that could prevent a solid connection.
Why is my mod not finding coil?
The Tank: A lot of the times a No Coil Detected warning isn’t arising due to the mod, it’s because of the tank or atomizer. Even though the mod may have a spring-loaded center pin within the connector, the tank’s 510 threaded connector may not be making contact with that center pin. This can happen for several reasons, such as the 510 connection not being long enough, the tank not being screwed in enough, the pin on the tanks connector not protruding enough from the connector, or a simple case of there being grime and debris that has lodged its way into the connector, preventing the two parts to making a solid connection.
Where to inspect tank coil?
Inspect the bottom base of the tank, where the coil makes a connection to the base, and make sure the area hasn’t been disturbed.
Is it rare for a manufacturer to release a product that is faulty?
Although quality control can often raise a concern with the non-stop outpour of products that make their way to the market , it’s very rare for a manufacturer to release a product that is faulty, especially since extensive testing is conducted by GeekVape before these products are set for release.
Is GeekVape a mod?
While GeekVape has a fascinating arsenal of products under its belt, including its popular Aegis Mod series, there are well more than a handful of GeekVape customers that are disgruntled due to a problem that is becoming consistent throughout the series.
Why does my vape spit back?
Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.
Why is my e juice not turning into vapor?
The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.
What does it mean when the fire button on a atomizer doesn't work?
If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2.If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
How to fix a sub ohm tank leak?
Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill the tank and wait around 10mins.
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
Can you unplug an external charger?
The external charger or device interface will have a “full” prompt, then you can unplug the charger.
Is Aegis shockproof?
As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, please click here. IP67 waterproof is able to withstand immersion for up to 30 minutes and at a depth of up to 1 meter.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
What is the official website of Geekvape?
www.geekvape.com is the ONLY official
How old do you have to be to buy an e-cigarette?
Only for adults. Anyone below the age of 21 is prohibited from buying e-cigarette.
