Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem. If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error.
Full Answer
How do I Fix my vape that won’t puff?
If you cover one of the device’s intake vents with your finger while puffing, you’ll increase the pressure of the air flowing through the disposable vape. That may get the puff sensor working again.
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
What should I do if my Smok vape won't turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: 1 Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to... 2 Check the battery to confirm that it’s properly inserted. Depending on your model, you might be able to pull out the... More ...
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
How do you fix a SMOK vape that won't hit?
If that doesn't work try blowing into the charging port to remove any potential debris or fluff which is getting in the way of the contacts. If you're still experiencing issues you can try to clean inside the charging port with rubbing alcohol but make sure that it's fully dry before inserting the cable.
Why is my SMOK not firing?
If you've verified the device is fully charged and is still not firing, try changing the coil inside the pod. A dead or dud coil may not be making proper connection with the battery and causing the device to not fire.
How do you fix a SMOK vape coil?
2:175:58How To Fix Your Smok Coils - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's fine all you need to do is get it through the cotton. Just this first layer if you see itMoreThat's fine all you need to do is get it through the cotton. Just this first layer if you see it through the cotton even better but you may have hit a wire. Just retreat start over again.
How do you fix a vape when it stops working?
Solutions to try include:removing the drip tip and blowing through it.cleaning or changing the coil.draining the e-liquid and cleaning it with some tissue paper.cleaning the tank by running it under hot but not boiling water. If you do this, ensure the coil and tank are completely dry before using it again.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why does my SMOK blinks 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
How do you open a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
How do you take apart a Smok vape?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
How do I know if my coil is burnt?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
Why isn't my vape working when it's fully charged?
A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it. You want to be careful to not overtighten or under-tighten your cartridge to your vape pen.
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
How to fix a vape that leaks?
How to fix. Keep your vape upright - If you vape when holding the mod at an angle, it’s more likely to leak. It gets worse when the mod is on its side. Keep the mod at an upright position at all times. When you’re not using the vape, keep the vents closed.
How to stop vape from leaking?
Increase wattage - If everything checks out, but your vape is still leaking, the flow of the liquid may be too high compared to the rate of vaporisation. A simple trick to counter this is to increase the wattage. Just be careful not to exceed the recommended settings.
Why does my vape taste burnt after replacing coils?
Prime the coils - One of the leading causes of the burnt taste in new coils is inadequate priming. You have to let the coil saturate with vape juice and let it soak for a few minutes.
Why does my SMOK Nord pod glow white?
It's also possible for the pod to lead onto the contacts, which can prevent the pod from getting recognised. For the SMOK Nord, if there light around , the firing key glows white when the device recognises the pod. That's a good place to start checking.
What is a defective coil?
Defective coils – If nothing seems to be working, then the only logical explanation is that the coil is faulty.
What to do when you are not using a vape?
When you’re not using the vape, keep the vents closed. Check the seals - Loose and worn-out seals and o-rings could be the cause of all this mayhem. Check to make sure the seals, O-rings and glass piece are tightened to seal any spaces.
Can you fix a smok mod?
These are some of the challenges you're most likely to face when using a SMOK mod. Luckily all of them have easy fixes that don't take much time . If for some reason, you believe the mod is faulty, you can get in touch directly with SMOK or your supplier for further instructions.
Why does my vape gurgle?
Spitting and gurgling always happen because e-liquid is in a place where it doesn’t belong. Excess e-liquid enters the pod’s atomizer coil assembly, and from there, the air pressure that you create when you vape causes the vape juice to start flowing up the pod’s airflow chimney. The extra juice causes a gurgling sound when you vape. Some of the juice may even enter your mouth. Yuck!
How to stop e-liquid from flowing through atomizer coil?
Examine the pod. Can you see air bubbles covering either of the pod’s wicks? An air bubble can prevent e-liquid from flowing through to the pod’s atomizer coil, and if that happens, the device’s automatic temperature protection will kick in to prevent the coil from overheating. With temperature protection engaged, your device will produce smaller vapor clouds – if it produces vapor at all. Tap the pod gently to break the bubbles.
How to fix a pod that is not charging?
Begin by removing the pod from your device and cleaning the contacts as described above. Clean the contacts on the battery charger using the same method, and then try charging the device. Is your pod system not charging? Scroll down to troubleshoot that issue. If the device is charging, let it charge fully before you continue.
Why does my puff sensor not work?
Insufficient air is flowing through the pod, causing the device’s automatic puff sensor to work unreliably
Can you fix a pod vaping system?
Pod vaping systemsmay look very different from one another, but the problems that you might encounter with them are mostly the same. At one time or another, just about everyone experiences a problem like weak hits , no hits or a leaky pod – and the good news is that , with a bit of general advice, you can fix almost any of those problems regardless of which specific pod system you own. So, whether you have a JUUL that’s not hitting, a SMOK Nordthat’s giving you weak hits or a Uwell Caliburnthat’s leaking, you’re in the right place. This article will explain how to fix the most common problems with any pod vaping system.