If your eGo batteries is fully charged and the lights are one, but it is not producing vapor, you may have a firing pin issue. It is very common for the center firing pin to get pushed down, which causes it to loose contact with the atomizer. To remedy the situation you need to pop the firing pin back out.
Full Answer
Why is my ego vape pen not producing vapor?
Ego not producing vapor. Another really common vape problem people report on ego and evod vape pens is the issue of their vape pen not producing any vapor. If your eGo batteries is fully charged and the lights are one, but it is not producing vapor, you may have a firing pin issue.
How to fix a vape pen that won't charge?
By using a cotton swab and rubbing alcohol, you can clean these connection points and get you vape pen rocking again. It’s possible that your connection to the charger could also be an issue. Check these connection plates to make sure that when your battery is plugged in, it is actually charging.
How to fix a vape cartridge that won't fire?
Just grab a paper clip and gently pry the connection plate back up like in the video. You battery will make better contact and your vape will be firing efficiently again. If this doesn’t do the trick, check the connection plate on the cartridge that you are using.
Is your vape pen giving you a burnt taste?
This, along with charging issues, is the most common vaping problems (also the most annoying) . If your vape pen is giving you a horrible burnt taste, you can do a few things to prevent it. Here are some common reasons why your vape pen may be giving you a burnt taste:
How do I fix my vape firing pin?
1:222:42The Center Pin issue! - Fixing a non firing eGo battery - eCigWizardYouTubeStart of suggested clipEnd of suggested clipAll you need to do is actually to take your battery. And take your needle I take this needle from aMoreAll you need to do is actually to take your battery. And take your needle I take this needle from a multi meat for my multimeter. Now. And you go inside see carefully.
Why is my vape not firing?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you fix a cartridge wire on a vape pen?
0:031:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
How do you open an ego t vape pen?
Your vape pen battery has a locking function so that it can't be activated by accident when not in use. To lock and unlock your battery, press the button 5 times in quick succession. The button LED will flash 3 times to show it has been activated/deactivated.
When I press the button on my vape nothing happens?
Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal. If a previous tank has been screwed on too tightly, the battery pin may need adjusting to make a connection again.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you hit carts with wires?
Again, we do not recommend trying this at home.Cut off the charging port of an Android charger. ... Remove the green and white wires. ... Strip the ends of the black and red wires. ... Insert the black wire into your cartridge. ... Touch the red wire to the outside of the cart. ... 3 reasons you should just buy a new battery.
How do you fix a broken wire?
2:333:07How to Repair Broken or Damaged Wires - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut off the existing connector and strip. One quarter inch of insulation from the wire end. Put theMoreCut off the existing connector and strip. One quarter inch of insulation from the wire end. Put the new connector onto the end of the wire. And use a crimping tool to secure it to the wire.
Can you dab a broken cart?
It is not safe to dab vapable THC juice from a cartridge. Do not do it.
What does it mean when my ego T blinks 10 times?
If you hold the button down to puff for 10 seconds at a time, the light will start blinking. This is a warning indicator telling you that you are shortening the life of your atomizer coil by using it too hard.
Why does my ego blink 3 times?
This is a standard safety feature in that batteries are designed to cut out in order to prevent overheating. Certain batteries will flash 3 times to indicate a short circuit.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
Is vaping safe?
Vaping is an easy and safe way to consume your cannabis, that’s why more and more people are turning to this method as opposed to smoking it. However, there’s always that fly in the ointment that keeps you from having a great time when vaping.
What is auto firing?
The term “auto firing” refers to a vaporizer that is firing, but without the user pressing the main fire or power button. The device is often being stored in a pocket, purse or drawer when it happens, not even within reach of an accidental button push.
Why is auto firing dangerous?
Auto firing can cause a battery to continue venting until it reaches an explosion point. This can lead to dangerous fires and potential injuries and is the biggest reason that auto firing should not be taken lightly.
Is it bad if your vape is firing on its own?
If your vape is firing on its own it can be a nerve-wracking experience, and a dangerous issue if left unchecked. Even if you’ve never had to deal with this scenario, it’s important to know the signs, possible causes and how to handle it. Here’s a helpful guide to understanding auto firing, as well as some tips for troubleshooting your box mod ...
Can you stop auto firing?
There are a few minor changes that could stop the auto firing and protect you from a potentially dangerous situation. However, first and foremost, you should consider your safety. If you’re a beginning vaper, you might not want to venture into repairs at this point.
Can you remove batteries from a mod that has been auto fired?
Even if you believe that you have successfully made the necessary repairs, always remove and store the batteries when your mod is not in use.
Can you leave an auto-fire device unattended?
Never leave a fully assembled auto-firing device unattended, because you never know when it might reach the point of no return. By interrupting the electrical circuit, you can prevent the device from receiving the power it requires to auto fire. Once you’re prepared to examine the device, try these steps:
Is it a risk to continue using a device that has demonstrated an auto firing issue?
At the end of the day, choosing to continue using a device that has demonstrated an auto firing issue is a risk. You can never be sure when the issue will return, and because it’s such a serious problem, it should be taken very seriously.
What is an Ego U vape pen?
The eGo u vape pen provides an alternative way of changing from direct smoke from cigarettes. With eGo-U electronic cigarette device, you can’t go wrong and won’t regret at all.
What is Ego C twist?
eGo C twist vape pen comes in as third generation of most popular eGo-T and eGo electrical cigarette gadget. It has latest innovative technology of changeable atomizer system. You can easily and quickly remove and clean cost-effectively. You may use the dedicated atomizer on every liquid option or replace it for freshness.
What is an Ego AIO?
The eGo AIO Vape Pen features an all-in-one style electronic cigarette device. It has an atomizer inside that adds great convenience to the user. It looks quite petite but very powerful that it produces large vapor you can enjoy.
Can you smoke with an eGo pen?
You can confidently put aside the cigarette habit but enjoy smoking with eGo vape pen. This vape pen doesn’t produce actual smoke but sieves tar and other harmful elements present in cigarettes.
Does the Ego U have a battery?
Has almost identical looks as that of eGo U standard vape pen. Comes in three-piece style pen kit, carefully and stylishly designed. The luxury kit has small nifty zip case which allows easy carrying, alongside an extra battery for quick changes. It has slightly longer 1100mAh battery that makes it sleeker and appealing.
Why isn't my vape working?
If your vape isn’t working after a refill and there is no smoke, , there are two common problems. First of all, the battery may need to be charged and turned on. Depending on the style of device you are using, you may need to press the firing button five times consecutively to turn the device on. If you have turned the device on, check ...
Why does my vape stop working?
Even the most experienced vapers sometimes have problems getting a new device to perform as expected. . Your vape may stop producing smoke or stop working all together after a refill. Due to the many interchangeable components within your vape, and the numerous menu options each device has to offer, problems can sometimes occur…
What happens if your atomizer is full?
If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How does a vaporizer work?
The vaporizer works by heating the coils which then cause the e-liquid to boil. If you are hearing a small amount of popping and fizzing, it may just be the coils doing their job. However, if you start noticing large popping sounds and gurgling you should begin by checking your tank for overfilling.
How long does it take for an e-liquid to soak up?
If your coil is discolored or dirty you should replace it. It is also worth noting that your e-liquid takes a few minutes to soak up into your wick. If you have just refilled your tank, let your device sit for a couple minutes before using it or you may get a dry hit.
Is there a problem with not getting enough vapor?
Not Enough Vapor. Not getting enough vapor is a slightly different problem than having no vapor at all. While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid.
Do VG liquids produce more vapor?
Higher VG liquids tend to produce more vapor. If you are using a low-powered device or e-cigarette, you may need to upgrade to something bigger. Most cig-a-like devices do not come with variable settings or even publish their power ratings.
Why is my vape pen not producing vapor?
The firing pin issue is the most common reason why your vape pen is not producing vapor, but there are many other reasons, such as: Clearomizer is low on e juice. Ejuice is on the firing pin. Moisture is on the firing pin. Your vape pen isn’t charged enough. You need to clean your clearomizer/ atomizer.
Why does my vape pen leak?
Here are some common causes for a leaking vape pen: Overfilled Tank: if you overfill your clearomizer tank, this can cause it to leak. Ejuice in Air Hole: Most vapers know that gurgling sound they get when vaping. This means you likely have e juice down the center air hole.
Why does my vape taste burnt?
Here are some common reasons why your vape pen may be giving you a burnt taste: You need a replacement atomizer head. You need to clean your atomizer head. You vape too soon after filling a new tank.
How to get E juice down the air hole?
Heavy Draws: Another way you can get e juice down the air hole is from taking too strong of a draw. This can force e juice between the rubber washers. Hot Environment: Another common way that you e juice down the center air hole this from leaving it in the hot car.
Do you need to clean your atomizer head?
Variable voltage vape pen is set too high. The most common solution is to simply continually clean your atomizer heads within your tank and to replace your atomizer head when cleaning doesnt help anymore.
Poor Connection from battery to cartridge
510 thread batteries transfer voltage to the cartridge through a connection plate that that is found on the inside of the threading. This plate is supposed to move up and down to accommodate different cartridges that screw on at different depths.
Dirty Connection between your battery and cartridge
If a cartridges internal hole and the thickness of the oil in it are not paired correctly, it can result in oil leaking into the thread area. When this oil gets in between the connection plates it reduces the conductivity, in other words, it can stop your battery from firing.
Bad Charger Connection
It’s possible that your connection to the charger could also be an issue. Check these connection plates to make sure that when your battery is plugged in, it is actually charging. A battery without a charge will not fire at all and you won’t see the lights turn on when activating it or turning it on.
