Full Answer
What makes the ijust 2 kit different from other e-cigarettes?
Dec 08, 2015 · OK, so I'm fairly new to vaping, decided to rebuild my coils, I bought 24g wire (kanthal) and Japanese cotton pads... I've watched plenty of how to videos, but I can't seem to get it quire right.... I rebuilt two tonight, they work but just aren't giving off the same amount of vape that the store bought ones are.... I'm using the eleaf Ijust 2.
What makes ijust 2 atomizer more user-friendly?
Need help replacing the coil in iJust2. Before you ask, yes, I can screw it in, but I've tried to replace the coil my iJust2 ( rig and .3 ohm coil for reference) but every time I try to replace the coil, my vape tastes weird. Not burnt, per se but just... off. I'm not sure what I'm doing wrong, but I think I'm not priming it correctly.
How to clean a vape coil?
Nov 22, 2019 · After a few minutes, pour out the warm water and add cold water. Any encrusted bits of vape juice should fall off and the coil should be clean. Let it air-dry completely, screw or slot it back into your vape, and you should be good to go—free of any burnt taste. You can also give the coil head and the tank a deep clean.
Why won’t my vape get a hit?
I used the atlantis V2 .5ohm coil in it for about 2 days, then it burnt out :<. Switched back to the .3 that came with it and It's still going strong, maybe I just had a bad atlantis coil but that was my experience. Also, I had to screw the V2 coil in SUPER tight for it to fire in the tank.
Flt Simulation Ultra Member ECF Veteran
24 guage is some pretty thick wire. Because it is thick wire, it heats very slowly unless you are putting lots of watts of power into it. How about getting some 28 guage Kanthal and starting from there ... I think you will be much happier.
Flt Simulation Ultra Member ECF Veteran
anywhere from 30 to 80 watts on the same coil ... that's a massive variation of power.
thetrucker Ultra Member ECF Veteran
I just bought a Ijust2 and tried today and the Aspire Triton Rebuildable System works in the Ijust 2 tank.
thetrucker Ultra Member ECF Veteran
The above post by Gallant ...looks like a good deal being actually made for the Ijust2..........
wheelie Ultra Member Verified Member ECF Veteran
OK, so I'm fairly new to vaping, decided to rebuild my coils, I bought 24g wire (kanthal) and Japanese cotton pads... I've watched plenty of how to videos, but I can't seem to get it quire right....
VapinAngel Full Member
I just bought a Ijust2 and tried today and the Aspire Triton Rebuildable System works in the Ijust 2 tank.
thetrucker Ultra Member ECF Veteran
Are you having any trouble with the Aspire Triton Rebuildable System? Any dry hits or anything? I'm looking at buying a rebuildable for my sons ijust2. What size wire do you use for making your coils? Thanks!
How long does a vape coil last?
How long a coil lasts will mostly depend on how much you’re vaping. Some people vape a lot and might have to change their coil after around a week, whereas more casual vapers might get as much as a month’s use out of a coil.
How to get rid of a burnt coil?
If you find yourself with a burnt coil, then one of the first things you can do before giving up and ordering a new one is simply to remove the element and put it in a small bowl of warm water. This will loosen up any e-juice that’s become stuck to it. After a few minutes, pour out the warm water and add cold water.
What happens when you fire a vape back up?
A little attention to your vape and a regular clean will save you lots of time and money, giving you uninterrupted vaping enjoyment.
How long does it take to get out of a vape?
It also depends on how a manufacturer makes its vapes and coils, including what materials it uses. Generally, if you’re a fairly regular vaper, you can assume you’ll get at least two weeks out of your coils—maybe even up to three weeks.
What is the cotton wick on a vape?
Usually, it’s not the metal coil that is causing the issue but the cotton material wrapped around it. This cotton wrapping is the wick in your vape, and it works by drawing liquid near the heating element, which warms the juice and turns it into vapor.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Can an alkaline battery explode?
It's also possible that an alkaline battery will expand, leak or burst during recharging. The fact that it's possible doesn't mean the chemistry of the cell is intended for recharging. It is inherently unsafe to recharge a battery that's only designed for a single use. Don't even try it.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
What is the 510 pin on a circuit?
Make sure the connection points or coil leads are intact and seated properly. Sometimes the connection points will cross over to the opposing polarity. One lead is supposed to touch the positive side of the circuit, which is normally the 510 pin at the base, and the other isn’t supposed to be anywhere near it.
Is it rare for a manufacturer to release a product that is faulty?
Although quality control can often raise a concern with the non-stop outpour of products that make their way to the market , it’s very rare for a manufacturer to release a product that is faulty, especially since extensive testing is conducted by GeekVape before these products are set for release.
Is GeekVape a mod?
While GeekVape has a fascinating arsenal of products under its belt, including its popular Aegis Mod series, there are well more than a handful of GeekVape customers that are disgruntled due to a problem that is becoming consistent throughout the series.
Is a coil reader expensive?
They’ re not expensive and can help you out with much more than just figuring out the wattage range of the coil. If you put a coil on a reader, even if it’s the one built-in to your mod and it reads anything other than what you expect, it may have a problem.
Can you turn a coil in its seat?
If you can still turn the coil in its seat, its not tight enough. Make sure that you have no debris inside the coil housing. Something as simple as a piece of plastic could prevent a solid connection and cause an atomizer short. Get into the habit of checking it and wiping out the area every time you open up the tank.
