This connection plate is designed to move slightly in order to work with a variety of different vape cartridges with 510 thread. It’s a super easy fix that just about anyone can do. You can use a paperclip to gently pry up the connection plate inside the thread and then screw on your charger or cartridge.
- Try Another Tank/Mod.
- Clean Your Contact Points.
- Check the 510 Pin on your Tank. If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error. ...
- Check the 510 Connector on your Mod. ...
- Reseat Your Coil.
How to fix a vape cartridge with 510 thread?
This connection plate is designed to move slightly in order to work with a variety of different vape cartridges with 510 thread. It’s a super easy fix that just about anyone can do. You can use a paperclip to gently pry up the connection plate inside the thread and then screw on your charger or cartridge.
How to fix a vape pen that won't charge?
By using a cotton swab and rubbing alcohol, you can clean these connection points and get you vape pen rocking again. It’s possible that your connection to the charger could also be an issue. Check these connection plates to make sure that when your battery is plugged in, it is actually charging.
How to fix a vape cartridge that won't fire?
Just grab a paper clip and gently pry the connection plate back up like in the video. You battery will make better contact and your vape will be firing efficiently again. If this doesn’t do the trick, check the connection plate on the cartridge that you are using.
Can you over-tighten a vape pen?
Over-tightening your vape pen can sever the connection between the battery and the cartridge. The 510 connection pin on the vape pen needs to connect with the cart to work. If you tighten the vape pen too hard, it can damage this important connection. Over-tightening can also break the rubber O-rings that seal the threading.
Why is my 510 not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do I fix a 510 battery connection?
0:201:16How Do You Fix a Vape Pen Battery? - O2VAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a very simple fix what we often tell people to use is just a paper clip. And if you stick theMoreSo a very simple fix what we often tell people to use is just a paper clip. And if you stick the paper clip in between the connection plate and the threads.
How do you fix a 510 coil?
3:176:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate ofMoreThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate of your 510 connection. Over time the connection on your e6 can gather dust dirt and e-liquid.
How do I fix my center pin vape?
1:112:43The Center Pin Issue - How to fix an eGo-T Battery DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can probably dig around and find whatever just make sure it's not going to break off and getMoreBut you can probably dig around and find whatever just make sure it's not going to break off and get stuck in there and you can gently push inside here and by pushing this disk.
Why does my 510 battery keep blinking?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How do you fix a broken vape pen wire?
First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil's positioning in the chamber. For broken electrical wires, the only solution is soldering or replacing the device.
Why is my vape on but not working?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
What is a 510 pin on vape?
A descriptor of the threaded connection used to join parts, “510” literally refers to 10 threads at 5mm. This type of threaded connection quickly became the standard for most e-cigs and vape pens, making it easier to use various cartridges and pens together.
How do I fix my vape pen button?
1:193:57How to fix a stuck button on an eGo style battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have a paperclip or anything like that you could use that as. Well. So I'm going to just pushMoreIf you have a paperclip or anything like that you could use that as. Well. So I'm going to just push down in there. And I've got it so I can see it not necessarily.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
Why is my disposable Not working?
Disposable Vape Not Hitting If your disposable vape isn't hitting – and you've been using it for a while without experiencing any problems – it's likely that you need to replace the device. Remember that, for safety reasons, a disposable e-cigarette will always stop hitting when the battery is dead.
How can I charge my disposable without a charger?
0:483:11How to Recharge a Dead Disposable! (Fast and easy, for any brand!)YouTubeStart of suggested clipEnd of suggested clipSo now i like to use you need an android wire or really any wire preferably an android wire becauseMoreSo now i like to use you need an android wire or really any wire preferably an android wire because i found the easiest. But you need to cut that wire open. And get the black and red wire.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to loosen up cannabis oil?
If you don’t have a hairdryer on hand, there are other ways to loosen up your cannabis oil. Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous.
How to get rid of a settled cannabis cart?
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds. Then reconnect the cart and take a pull. If your airflow is still obstructed, repeat the process again.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
been there Super Member Verified Member ECF Veteran
The positive + wire needs to be solder to it,take out the little rubber washer that the pin goes onto and try to get the positive wire out and then it will need to be solder to it.
twizted Super Member Verified Member ECF Veteran
Heat shrink, the coating off a piece of lower gauge wire, or maybe the tip of a larger pipette.