One of the coolest features of the Trinity Alpha is its filling mechanism. All you do is slide the fill port on top and dump your e-liquid in. This is a real game changer if you’re on the go and just need a quick refill.
- Hold the device upright.
- Slide the top fill cap across (or remove if your pod has the screw type top cap).
How big is the smok Trinity Alpha vape?
While the SMOK Trinity Alpha is only currently available in 6 colors, each one is a tiny work of art. Measuring in at 90mm by 38mm and only 16 mm deep, this is truly designed for stealth vaping.
How to fire the smok Trinity Alpha?
Firing the Trinity Alpha: Press and hold the Fire button. If you accidentally hit the button or press it for too long, it will automatically shut off after 8 seconds. We hope that you have found this complete guide helpful, especially if you are currently considering purchasing a SMOK Trinity Alpha kit.
What is the refill system of Trinity Alpha?
Trinity Alpha uses top refill system with a stainless steel filling cap for convenient e-liquid refilling and leakproof purpose as well. and it has three modes to satisfy different vaping demands --- S (Soft)/N (Norm)/H (Hard).
How do I install the Trinity Alpha coil on my Pod?
Installing the Trinity Alpha coil: If the pod is already installed, press the pod lock button to release it. Turn the pod over and insert the Nord coil into the large hole in the base and twist it into position.
How do you fill a Smok Trinity Alpha?
1:0411:51Trinity Alpha by Smok - Takes Nord Coils!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow your coil your Smoak Nord coil goes in the bottom there in order to fill. This you push this guyMoreNow your coil your Smoak Nord coil goes in the bottom there in order to fill. This you push this guy over.
How do you put Trinity Alpha coil in?
1:003:09How to change your coil on the smok trinity alpha - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just take that tab. And you push it back and then your pod will come right out so you justMoreSo you just take that tab. And you push it back and then your pod will come right out so you just push the tap back and pull the pot up and when you notice on the bottom of the pod.
How do you change a coil in a Smok vape?
1:295:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If youMoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If you accidentally remove the bottom plate of the atomizer.
Is the Trinity Alpha for salt Nic?
Moving forward, the Trinity Alpha utilizes a cartridge system that can hold 2.8ml of either salt nic or freebase e-liquid. The cartridge is easily filled with the swivel to open top cap located next to the drip tip and the button to unlock the cartridge.
Why does my Trinity Alpha blinks 4 times?
Low voltage = if the voltage is below 3.3V the LED will flash 15 times and the device will shut down – time to recharge! No atomiser = LED will flash 4 times. Resistance incorrect = if the resistance of the atomiser is below 0.5ohm or above 3ohm the LED will flash 4 times.
How do you know when Trinity Alpha is fully charged?
There is an LED indicator toward the device's base;a green light means that the battery is at 70 to 100%,an orange light means that it's at 30 to 70%,and a red light means that the battery is less than 30%
How do you fill a SMOK vape?
0:341:57How To: Prime and Fill The SMOK Novo 2 Pod Vape | VaporleafYouTubeStart of suggested clipEnd of suggested clipThat's on the bottom end of the pod there. And then. We can grab our bottle of juice and fill. We'reMoreThat's on the bottom end of the pod there. And then. We can grab our bottle of juice and fill. We're just gonna put the tip of the bottle in there. And. We're gonna gently squeeze.How To: Prime and Fill The SMOK Novo 2 Pod Vape | Vaporleafhttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fill a SMOK vape?
How do you refill a SMOK vape pen?
2:535:49SMOK VapePen 22 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipGanz wichtig wenn ihr das das erste mal gefüllt.MoreGanz wichtig wenn ihr das das erste mal gefüllt.SMOK VapePen 22 Tutorial - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you refill a SMOK vape pen?
How do I open my vape tank?
How to Refill a Vape TankTo refill your top-fill tank, start by removing it from the body of your e-cig mod.Unscrew the base and carefully remove the coil. ... Next, unscrew the top of the tank to add your e-liquid. ... Reassemble your tank and screw all the pieces back together tightly.More items...•How to Refill A Vape Tank - Vapourizhttps://www.vapouriz.co.uk › blog › vaping-guides › how...https://www.vapouriz.co.uk › blog › vaping-guides › how...Search for: How do I open my vape tank?
How many mAh is the Trinity Alpha pod?
Trinity Alpha, the new open pod system by SMOK, is in the shape of square box featuring one 1000mAh internal
What is the exterior of drip tip?
The exterior of each drip tip features a unique resin design with a unique touch of style.
How many power modes does ality have?
ality offering three power modes. As for its pod, it adopts an ingenious slide-to-open type design on its filling cap to
Why do you need a lock button on a pod?
lock button to fix the pod for the sake of security. So you can easily achieve the pod detachment by pushing this lock button. When attaching the pod, you need to double check whether the pod is attached in place.
How many airflow channels are there in a vaporizer?
There are two airflow channels to help bring more air in and produce huge vapor.
How to switch to power output mode?
You can switch to your desired power output mode by pressing the Mode Button, and meanwhile, the corresponding LED light will be on.
How big is a pod for a Trinity Alpha?
The POD for the Trinity Alpha has a pretty decent 2.8ml capacity, it’s not massive, but it’s also a lot larger than some POD systems. Comparing it to Lost Vape’s Orion 2ml capacity, it crams 0.8mls more into that tiny space.#N#The POD is topped by an interchangeable 510 drip tip, you can put your own on if you have something else you prefer, and it will fit nice and snug.#N#As mentioned earlier, these pods allow for separate installation of coils, so you no longer need to purchase complete pods when your coil starts ruining your flavours. That should save you some hard earned cash!#N#Taking advantage of the good publicity they’ve received from their Nord device, the Trinity Alpha is designed to use the same coils. A simply push in or pull out, no threads to strip, not fancy latches or screws, putting a new coil into a pod couldn’t be easier.#N#Coils have quite a snug fit too, which I found to be an absolute plus, considering the disaster that would happen should they work themselves free!#N#The Nord coils are available in 4 types, all fitting the Trinity Alpha:#N#– Nord Mesh-MTL 0.8 Ω coil (mouth to lung, more clouds/flavour,longer lifespan, Max Power: 16W)#N#– Nord Mesh 0.6 Ω coil (For sub-ohm, big vapour, Max Power: 25W)#N#– Nord Regular 1.4 Ω coil (MTL, Max power 12w)#N#– Nord Ceramic 1.4 Ω coil (High temp resistance, Long lifespan)#N#So there is a coil for everybody! Well, almost.#N#While the DTL coils worked quite well with their restricted draw, I absolutely expected the MTL coils to give a nice tight and restricted air flow. Not so.#N#In reality, the MTL coils were barely less restrictive than the DTL coils.#N#You can block the back airflow in the back of the body of the Trinity and get a little bit tighter of a pull, but even then, it’s still not a true MTL.#N#So if you’re looking at getting this and thinking to use it for an all day out and about vape with a nice tight mouth to lung airflow, you’ll be sadly disappointed.#N#How do the pods go on the leak test?#N#Ok, under normal conditions, you’ll find that they don’t leak. However one situation that I’ve found WILL make them leak, and quite a lot, is if the sliding fill port is left open.#N#Unfortunately this can happen at the worst of times. You see the slide fill port, doesn’t sit firmly in place, the smallest nudge with your finger will open it, de-pressurising the pod, and allowing a slow leak from the bottom, into the main body. You can only imagine the trouble that this might cause in several situations.#N#Like in your pocket, you know “WHERE YOU PUT YOUR POD DEVICE BECAUSE ITS PORTABLE!”. Or how about in your bag, “WHERE YOU PUT YOUR POD DEVICE BECAUSE ITS PORTABLE!”.#N#Sorry Smok, but this one really is a deal breaker.#N#(Disclaimer: This might not happen with all of them, and replacement pods may have a stronger grab on the sliding fill port. I am looking into getting a replacement POD to test the outcome.)
What is the Trinity Alpha Kit?
The Trinity Alpha Kit, has a few very important features that if done right, will put it ahead of the game. (for now anyway, we all know the fast moving POD world will spit the next big thing out very soon!)#N#With the Trinity Alpha, Smok have tried to match Lost Vape’s Orion device’s profile with it’s steel bodied, rectangular looks, (walkie talkie anyone?), but they’ve gone one better. Replaceable coils as well as replaceable POD.#N#This is a huge thing, since purchasing new pods all of the time can get quite expensive, not to mention the carbon footprint, with this Kit, and previously on the Smok Nord, you’ll see savings by simply swapping out coils.#N#Another benefit to this is the various coils available, from Direct to lung, coils, through to Mouth to lung coils, they have every type of vaper covered in the one system. Very clever.#N#Let’s go into some more detail on the Trinity.
Who is Shane Presser?
Shane Presser has been vaping since 2013, and has extensive experience with advanced equipment, coil builds and DIY mixing. He is the man behind VapersGarage, and also more recently Aussie Vape Stores, a resource to help vapers find their nearest Vape Shops, and eLiquid Vendors.
