How to Fill the Kanger SUBVOD Tank:
- Unscrew the top cap and lift it out. This will expose the e-juice reservoir.
- Pour in the e-juice.
- Screw the top cap back on.
How to fill a vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming. How to fill a vape pen? Please wait 5 minutes for the e-liquid to soak into the coil completely. The above procedure is not the only way to load the tank of your vape pen.
Is the Kanger subvod kit the best vape tank for You?
Consisting of the TopTank Nano and the SUBVOD Battery, the new Kanger SUBVOD Kit is entirely in line with this commitment, and represents the perfect kit for vapers of all sorts. The Kanger TopTank Nano Clearomizer is one of the most popular tanks on the market today, and for good reason—it’s fantastic.
What is a sub-ohm vape?
Typically sub-ohm vapers take lung hits meaning they inhale straight to their lungs increasing the vapor they can inhale each puff. Those who vape sub-ohm usually favor e-liquid with a higher percentage of vegetable glycerin than propylene glycol.
How do I Fill my tank with e-liquid?
1 Disassemble Your Tank ＆ Fill Dropper With e-liquid. 2 Fill tank but avoid the middle hole. 3 Disperse e-liquid along the inside of the tank. 4 Screw airflow base back onto tank with the battery end down. 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How do you change the coil on a Kangertech Subvod?
1:033:49Kangertech Subvod Kit Overview - Glass and Coil Replacement!YouTubeStart of suggested clipEnd of suggested clipIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out toMoreIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out to put your new one in just put it in to write it in I always recommend taking a few drops of liquid.
How long does a Subvod coil last?
Open it completely for D2L vaping or adjust it to your M2L vaping style. The supplied SS coil will last beginners up to 3 weeks. I've been using the SubVod kit moderately for a full week and the coil is still in pristine condition. To make sure your coils last longer try to avoid heavily colored liquids.
How do you turn on a Subvod vape?
1:009:22SubVod Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you know that it's on will light up anytime you hit this button. Five clicks off one twoMoreAnd then you know that it's on will light up anytime you hit this button. Five clicks off one two three four five. Now when I hit the button the light will not come on.
What is a Subvod kit?
The Kanger SUBVOD Starter Kit is a complete, easy to use, entry level set-up that features a 1300mAh Kanger SUBVOD Battery, a Kanger TOPTANK Nano, Kanger's new SSOCC coil, and essential accessories that make for a perfect starter and travel kit.
How do you know if your coil is burnt?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.
How do you clean a burnt coil?
How to Clean a Burnt CoilSTEP ONE: SOAK YOUR COILS. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.STEP TWO: CLEANSE YOUR COILS (optional) ... STEP THREE: LEAVE TO AIR DRY. ... STEP FOUR: PRIME THE COILS. ... STEP FIVE: REPLACE.
How do you fill a Kangertech tank?
0:060:51How To Fill A Kangertech EVOD - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
How do you turn on a spider vape?
2:518:35Kangertech Spider Kit! | TiaVapes Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can see that it is also one two three four five clicks turns it on and then you can see theMoreAnd you can see that it is also one two three four five clicks turns it on and then you can see the screen here.
How do you put vape juice in a Kangertech?
5:3811:59Kangertech Subvod Kit & Juice Box Eliquid Review And GiveawayYouTubeStart of suggested clipEnd of suggested clipAnd you just put it right on the side just like that and drop it in I like to tilt the tank on itsMoreAnd you just put it right on the side just like that and drop it in I like to tilt the tank on its side actually because if you do that it helps to keep from forcing the juice down into that coil.
How many watts is a Kangertech Subvod?
The KangerTech Subvod is a high-performing and incredibly appealing device coming into the market for around $36.00....Kanger Subvod Tank Specifications.Kanger Subvod TankDiameter:18.5mmMinimum Coil Resistance:0.4ohmWattage:15-60W4 more rows•Apr 28, 2017
What is SSL in vapor?
Rest assured that when purchasing from Vapor Authority, all of your information is transmitted using Secure Sockets Layer (SSL), which encrypts your data. Your payment is conducted through our merchant bank’s secure servers, and your payment information is never stored within our internal servers at any time.
When does Vapor Authority ship?
To help further this effort, we offer same-day shipping on all orders placed by 12:00 PM (Pacific Standard Time). Full details on our Shipping page.
How to refill a Kanger top tank?
Rather than being forced to detach the tank from the battery, unscrew the base, add liquid, then reassemble all of the parts each time more liquid is required , the TopTank Nano allows you to simply and easily refill the tank by simply unscrewing the top cap. This makes refills substantially quicker, while simultaneously reducing the likelihood of leaks.
What is Kanger atomizer made of?
Regardless of the coil you choose, all of them are made with 100% Japanese organic cotton. Although ostensibly an inconsequential detail, the use of organic cotton plays a significant role in overall vapor quality. Unlike standard cotton, which contains contaminants such as bleach, organic cotton is wholly devoid of such impurities. This results in a much cleaner and tastier hit that you are sure to love.
How long is Vapor Authority warranty?
Don’t worry – you’re covered! You can always purchase with peace of mind from Vapor Authority. We offer you a full 60-day in-house warranty on all manufacturer defects, and a 15-day period for returns and exchanges on unopened items as well. Full details on our Warranty page
Does Vapor Authority carry knockoffs?
To ensure this, we solely buy directly from the manufacturer or a manufacturer authorized distributor. Vapor Authority does not carry any clones or knockoffs whatsoever—guaranteed!
Can you charge a Kanger vape with a USB cable?
Kanger very smartly fashioned the SUBVOD Battery to be charged with a standard micro USB cable. This allows you to charge your device on any USB outlet, computer, or even in the car.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
What is it called when you test your vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How long does it take for eliquid to soak in a coil?
Please wait 5 minutes for the e-liquid to soak into the coil completely.
Do vape pens have the same parts?
Before asking questions, it’s necessary to know the components of a vape pen. In fact, most vape pens have the same parts, though some will differ slightly.
How does a sub ohm vape work?
All mechanical mods, VV/VW regulated mods and e-cigarettes are electrical devices powered by a battery. Sub-ohm vaping utilizes the principles of Ohm's and Joule’s laws of electricity. For our purposes this means, a non-variable voltage source like for instance the battery in a mechanical vape mod will increase the overall power output (wattage) of your device when you decrease the resistance (ohms) of your coils. It is absolutely crucial that sub-ohm vaping must be done safely. As you decrease your resistance you will increase the amperage your device uses to supply the current needed. This increases the strain on the battery and also increases heat that the battery and coils generate. For this reason you must ensure that you never exceed the amperage limit of your battery or it could fail causing possible fire or explosion.
What batteries do you use for sub ohm vaping?
You want to make sure it is an authentic battery from a reputable brand. Typically sub-ohm vapers use unprotected IMR or hybrid lithium batteries.
Why do vapers use sub ohm?
The reason some advanced vapers “sub-ohm” is to increase the power output of fixed voltage devices like mechanical vape mods and non-variable regulated devices to create more vapor or flavor . Although it might sound simple it's actually a complex and often controversial topic within the vaping community. The goal of this guide is ...
What does sub ohm mean?
Typically sub-ohm vapers take lung hits meaning they inhale straight to their lungs increasing the vapor they can inhale each puff. Those who vape sub-ohm usually favor e-liquid with a higher percentage of vegetable glycerin than propylene glycol.
Can you use an unvented vape mod to sub-ohm?
You can't have too many or too large of vents for your mod. NEVER USE AN UNVENTED MOD TO VAPE SUB-OHM. You will also want a vape mod with low voltage drop.
Can you use variable voltage for sub ohm vaping?
Although it has become quite popular for people to use variable voltage/wattage devices for sub-ohm vaping it is actually unnecessary. Sub-ohm vaping evolved as a way to increase power to the coils beyond what the safe capacity of regulated devices available at the time. Today high power regulated devices are widely available can deliver a consistent amount of power to the coils allowing you to use the resistance of your choosing and the ability to adjust it to your liking while potentially out performing the capacity of even a sub-ohm build on a mechanical vape mod. While low power regulated devices remain best suited for resistances above 1ohm.
Is it safe to vape with a sub ohm battery?
The honest answer is yes and no. When some basic safety rules are followed sub-ohm vaping is quite safe. If these safety rules are not followed your battery or device can fail resulting in injury or property damage from fire or explosion.
Markjizzle1
My subvod blinks 3 times when i try to vape. The battery has a full charge and I tried putting other coils in the tank and still nothing no smoke at all. When the tank is off the button functions normally and the light stays on as long as I hold the button.please help me pleaseeee
Markjizzle1
My subvod blinks 3 times when i try to vape. The battery has a full charge and I tried putting other coils in the tank and still nothing no smoke at all. When the tank is off the button functions normally and the light stays on as long as I hold the button.please help me pleaseeee
FXRich
They should work just fine, the Subvod will blink 3 times when the coil is below .5 ohms or if there is a short, I have Subvods and have tried to use a coil below .5 and all it will do is blink 3 times. Factory coils aren't that accurate, and yours might be .49 or .48 and cause the mod to think there is a short.
FXRich
Probably not the battery, more than likely you have a bad batch of coils or maybe the coils were packaged wrong, which is possible, what does the coils have printed on them?
Markjizzle1
I used this exact same coil in it while it started flashing so I don't understand how the coil is no longer working and I just exchanged it with the same coil and it still is blinking the coil imprint is Kanger 0.5 omega symbol 15w-60w
FXRich
It is possible the Subvod battery is bad, did you buy it online or at a local vape shop?
Markjizzle1
At my local Vapor Shop. What I don't understand is when there is not a tank on the battery it turns on as if it were working when the tank is on it and then when I let up off the button it turns off
