Fill your syringe and gently push the syringe tip into the cartridge and fill it to the top, or where you find the max fill line. It is recommended that you leave the cartridge attached to your battery to help hold onto it better while refilling.
Full Answer
How to fill a vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming. How to fill a vape pen? Please wait 5 minutes for the e-liquid to soak into the coil completely. The above procedure is not the only way to load the tank of your vape pen.
How do you fill a top-fill vape?
If you need to fill your top-fill vape, start by unscrewing the airflow base at the bottom of the vaporizer and pulling out the coil. Next, prep the coil by dropping 1 drop of e-liquid onto each cotton hole located on the coil.
Can you over-tighten a vape pen?
Over-tightening your vape pen can sever the connection between the battery and the cartridge. The 510 connection pin on the vape pen needs to connect with the cart to work. If you tighten the vape pen too hard, it can damage this important connection. Over-tightening can also break the rubber O-rings that seal the threading.
How do you recharge a pull to draw vape pen?
Pull-to-draw batteries remain “on” until they die, and you recharge it using its USB port. Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
Why do you need to be stationary when filling a vape pen?
The most important part of filling a vape pen with liquid is going to be to make sure that you are keeping good track of the liquid itself and not letting it spill everywhere. So, you will probably need to remain stationary to avoid dropping oil all over yourself, your vape pen, and the area around you.
What is a vape pen?
First things first, the term ‘vape pen’ is a bit generic. There are all kinds of vape pens. Some vape pens such as a dry herb vaporizer, wax pen, and oil pens (pre-filled and reusable, empty ones) and this will all affect how you fill your vape pen. Not to mention, not all vape pens have the same styles or features, ...
How to use a dabber for vaping?
Use a dabber to load the wax coils but NEVER poke the coils directly and try to avoid contact at all costs. Just gently push the ball of wax towards the coil and the heat should do the rest while you are vaping. In addition, you will want to make sure you don’t overpack your wax pen.
Why is a glass globe vape pen more sensitive to damage?
For example, a glass globe vape pen might be more sensitive to damage because of the, well glass globe that can shatter if bumped the wrong way.
Can you overpack a vape pen?
In addition, you will want to make sure you don’t overpack your wax pen. This will cause it to strain and could contribute to the vape pen burning out, and in either case, over-packed coils will overflow when the wax bubbles-up from the heat produced by the coil.
Can you vape with two different oils?
Different oils have different operating temperatures and if you have two oils that work better at different temperature and power settings you might end up making your vape pen experience less than optimal. Not to mention the flavors might not taste good together and you may have wasted the vape oil.
Do all vape pens have the same features?
Not to mention, not all vape pens have the same styles or features, and many will differ in how they are entirely set up to begin with, even if the most basic science behind them is the same. For example, when thinking about loading a wax pen vs a dry herb pen you have to keep a few things in mind.
How to refill a cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
Step One: Remove the Mouthpiece
Open the cartridge up, and you can do so by twisting it counterclockwise until it is fully detached. You might have to twist it two or three full rotations to free the thread holding it in its place.
Step Two: Fill the Cartridge
This is the step where we will use the syringe we mentioned earlier. But if you do not have a syringe, an eye-dropper does the job as well. The former is more precise and has a lesser risk of leaking products.
Step Three: Replace the Mouthpiece
You are almost done! Take the mouthpiece and gently put it back onto the cartridge. Twist it around clockwise until it is tightly screwed on. While
How to Fill a Vape Pen 101
Ultimately, vape pens can cover a wide array of options. It can range from dry herb vaporizers to wax pens, to various other models. Due to such a vast assortment of devices, the exact process for filling up a vape pen can change from one model to the next. Generally, it comes down to not only the model but also what type of material it is used.
How to Fill a Vape Pen with Liquids
Whether you prefer e-juice, oil, a nicotine-based option, or some other liquid substance, vape pens are very versatile in the type of liquids you can use to vape. However, no matter what the liquid substance, the process for filling a vape pen with liquid remains the same.
How to Fill a Vape Pen with Wax
Wax pens are a fairly easy device to use. To begin, you simply turn on the device by clicking the power button 5 times in quick succession. Once it is on, a light will flash. Users can load the device fairly easily by opening up the mouthpiece by unscrewing it. Using a dab tool you can load the wax concentrate onto the exposed coil.
How to Fill a Vape Pen with Dry Herbs
The biggest difference between dry herb vapes and liquid or wax vapes all comes down to the loading process. Unlike liquid and wax, dry herbs need to be ground up before you fill up your vape pen. Once the herbs are ground up, place them directly into the chamber by removing the cap or cover exposing the chamber.
Tips for Filling a Vape Pen Carefully
In order to fill a vape pen carefully, there are a few key points you will want to keep in mind:
How to Re-Fill a Vape Pen
When re-filling a vape pen, you fill it exactly the same way as you did the first time. Nonetheless, there are things to keep in mind you do not need to worry about during the first time you fill your vape pen.
Can you put Water in a Vape Pen?
Vape pens are an electronic device. Therefore, the parts they use are designed for the specific concentrate they vape (liquid, oil, wax, etc.). Unless a vape pen explicitly is meant to use water, you cannot put water in a vape pen without damaging or even ruining the device.
What does "spillage" mean in vaping?
It helps to have tools that can guide the concentrate into your vape pen. Spillage means you are wasting your concentrates.
What does spilling mean in a concentrate?
Spillage means you are wasting your concentrates. Carry around a small kit where you can store your tools and concentrates for easy refilling anytime, anywhere. Take your time. The chances of spillage is higher when you rush the whole process. Refill in a well-lit area.
Can you use a pen vaporizer for wax?
Wax. There is also a pen vaporizer for wax concentrates. For wax pens, you have to unscrew the mouthpiece off to expose the coil. You will need a dab tool (usually comes with the vape kit) to load the wax concentrates on the coil. Then, place the mouthpiece back in place.
Can you use dry herbs in a vape pen?
Dry herbs. You can also use dry herbs on your vape pen. You have to make sure that the dry herbs are ground up. Then, you can place them in the chamber. Take note: you should not overfill the chamber or that the dry herbs are not packed tightly into the chamber. You will not be able to vape dry herbs properly if there is no space ...
Can you overpack a vape pen?
Seal tightly. The concentrates on your vape pens can leak out if you do not return the parts properly and seal them tightly after refilling. Clean before refilling.
Can you fill a vape pen with liquid?
You can fill your vapor pen with liquids such as oil, e-juice, or vape juice. If you are using liquids , you will be relieved to know that this is one of the easiest things to fill your vape pen. All you have to do is pour the liquid directly into the tank.
Can you vape dry herbs?
You will not be able to vape dry herbs properly if there is no space for air to pass through it. When refilling, ensure that you clean out the chamber since what is left over will be sticky from the heat and may stick to the chamber if you do not clean it out – this can affect the taste of your vapor drastically and can even restrict the airflow ...
How to take a vaporizer apart?
The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.
How long should I let my e-liquid settle?
Step 5: Let your e-liquid settle. When everything’s back in place, it’s always best to allow your e-liquid to ‘steep’ inside your tank for 5 minutes. Your coil will then be primed to deliver a supreme vaping experience with optimum flavour.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
