Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
Full Answer
How does the voopoo drag mini mod work?
There’s a three-button control face to make necessary adjustments, and a micro-USB port is equipped towards the bottom, which allows for both charging and future firmware upgrades. Powering the VOOPOO Drag Mini Mod is an integrated 4400mAh rechargeable battery that’s sure to carry you throughout long durations before needing a charge.
How do I charge the battery of my voopoo mod?
You must charge the battery via the micro-USB port, and if there is a defect upon receiving the device, you should contact the VOOPOO Support Center for further assistance. The battery that comes built into the mod is a 4400mAh rechargeable battery.
How to check if a voopoo product is authentic?
There are two ways to find this code, which is by scratching the silver cover to reveal the code or slowly rotating the mark in the light. Once you find the code, visit VOOPOO’s Authenticity Query page and validate the product. How To Turn On The Drag Mini Mod: Press the fire button 5 times consecutively.
How to turn on the drag Mini MOD?
How To Turn On The Drag Mini Mod: Press the fire button 5 times consecutively. To turn the device off, repeat the process. How To Activate and Vape: From the first time you turn the device on, it will automatically default to the variable wattage mode that comes equipped.
How do you fill a Voopoo drag mini tank?
2:076:55VooPoo Drag 2 Mini Starter Kit video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got your standard boo boo fill where you just find a little arrow hinge. That forward and youMoreIt's got your standard boo boo fill where you just find a little arrow hinge. That forward and you got your fill port right there you can see it comes with a nice bubble blast.
How do you fill a Voopoo drag vape?
1:062:23VOOPOO DRAG S POD KIT Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen filling up your pod unplug the rubber seal from the base of the pod like so to reveal the fillMoreWhen filling up your pod unplug the rubber seal from the base of the pod like so to reveal the fill hole. And then carefully insert your a liquid nozzle and gently. Squeeze.
How do you put juice in a drag mini?
2:425:38VooPoo Drag Nano Pod System Starter Kit - Review & TutorialYouTubeStart of suggested clipEnd of suggested clipPut it to the hole. And fill it up. Now. Once you fill it up just put the cap back on insert. ItMorePut it to the hole. And fill it up. Now. Once you fill it up just put the cap back on insert. It into the drag nano. You'll hear it click when it's all the way down.
How do you use the Voopoo drag mini?
The Drag Mini is powered by the new GENE FIT Chip, and will fire at up 117W. To turn the device on or off, press the fire button quickly five times. You get a few different modes with the Drag Mini, and these are: Power, Temperature Control, and Memory Modes. By updating the software, you also get access TCR.
How do you load a Voopoo vape?
0:414:28FV Vape Show - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere we go pop the fill port cap back over the little rubber stopper push that back in put the baseMoreThere we go pop the fill port cap back over the little rubber stopper push that back in put the base of the tank. Back on and leave to soak for around 10 to 15. Minutes while that's soaking.
How do you fill a vape tank?
Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line. Put your vaporizer back together.
How do you fill the tank on Voopoo drag 3?
1:3714:03Voopoo Drag 3 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou pop this off like that and the way you fill it is this grommet. Oh i can't tell you how much i'mMoreYou pop this off like that and the way you fill it is this grommet. Oh i can't tell you how much i'm starting to hate grommets in terms of how messy. They are so you take that grommet.
How long does a coil last in a Voopoo?
between 7 to 21 daysWhile the exact duration may differ from person to person depending on their personal vaping habits, most new coils are designed to last anywhere between 7 to 21 days.
How do you open a Voopoo pod?
2:5913:07VooPoo DRAG Nano 2 - A Perfect POD System!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes. When you just have the cap on there. Air still works its way in there and you'll stillMoreSometimes. When you just have the cap on there. Air still works its way in there and you'll still get a little leakage. Um which way is it going there we go pop that open there's your fill port.
How do you fill a Voopoo drag 2?
0:572:28VOOPOO DRAG 2 Black Refresh Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen filling up your pod unplug the rubber seal from the base of the pod like so to reveal the fillMoreWhen filling up your pod unplug the rubber seal from the base of the pod like so to reveal the fill hole and carefully insert your e-liquid nozzle and gently squeeze. Once filled re-plug the seal.
What coil does a Voopoo drag mini take?
Pre installed is the P2 coil which is a 0.6Ω single mesh coil, best fired between 24 and 28w the spare N1 mesh coil is 0.13Ω, 50 to 100W, best fired between 70W to 80W. FYI both coils are kanthal. All UForce coils are compatible with this tank – U2,U4,U6,U8,N1.
How long does it take the drag mini to charge?
about two hoursUnder the adjustment buttons is the micro USB port for charging and for firmware updates. When tested it charged at a rate of about 1.3A and usually took about two hours to fully charge the device. Now much like the Drag 2 the Drag mini uses a newer version of the Gene chip called the Gene. fit.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
What's Fit Mode?
FIT is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3, it will protect sub-ohm tanks from burnout (*Under normal and right operating conditions) Intelligent matches with tanks.
How to Enter the Fit Mode?
Press the firing Button For 3 times, enter the FIT Mode, ther are 3 types available, including Fit 1, Fit 2 and Fit 3, Press the firing button when "FIT 1" shows on screen, it will work, provides you Super Battery Set. The Fit 2 and Fit 3 setting is as well as the Fit 1.
2. Fit 1: Super Battery Set
In this mode, you can see that battery is still full after a few hours using, in this way, you can use the drag 2 & mini all day long without charging!
4. Fit 3: Cloud Set
With Fit 3 mode, you can easily puff a big cloud without a hard deep breath. You can experience easily how to make vape tricks~
