
- First, remove the top of your tank.
- Then, locate the fill hole and point the nozzle of the bottle towards it.
- It’s best to tilt the vape tank a little bit so there are no pockets of air forming.
- Put pressure on the bottle and fill the chamber with vape juice.
- Attach the top of the tank back on.
- Be sure to wipe any leftover e- juice.
How to pick the right tank for your vape?
Vaping for dummies: how to choose the right vape device
- Cig-A-Likes. Cig-a-likes were the first vaping devices to hit the market. ...
- Vape Pens. The next device you need to consider when choosing your ideal vaping device is the vape pen. ...
- Pod Systems. Pod systems are a fairly new entrant into the scene. ...
- Box Mods. Box mods have a large and bulky shape. ...
- Mechanical Mods. ...
How often should you replace vape tank?
- Heavy Vape Users: Those who vape heavily every day should change their coils weekly. ...
- Moderate Vapers: These are vapers who either smoke small amounts each day or can simply go on without vaping for long periods of time. ...
- Light Vape Users: Vape users that don’t need daily hits can have their vape coils changed in three to four weeks.
How to empty vape tank?
- If your tank includes o-rings, check them for damage or wear each time you clean the tank. ...
- If your vapor tastes burnt, even after a fresh cleaning, it’s likely time to replace the coil.
- Other signs that the coil or another piece may need to be replaced include less vapor coming through your device, any leaks, or an unsatisfactory vape.
How do you fill a vape?
- Place your vape or e-cig at the side of the mouth.
- Slowly draw on the vape for 3-5 seconds allows the atomizer to heat up fully.
- Have a zero nicotine vape available when you want to vape continuously.

How do you fill a vape tank?
Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line. Put your vaporizer back together.
Do you fill vape tank all the way?
Don't fill your tank to the top when using your e-liquid. Fill it enough so that you can vape as much as you would like with that flavor without getting an dry hit. Run out of juice once, and you'll learn your lesson about dry hits. A safer method is to use a smaller tank.
How full should my vape tank be?
If there's no fill line on your e-cig, then use the general rule that you shouldn't fill past the bottom of your wick. The bottom of your wick should be located after it leaves the center post. Fill the tank up to a few millimeters below that and you should be good to go.
How do I open my vape tank?
Sometimes the vape tank requires little extra force to unscrew it from the mod. Use either a rubber band or mouse pad to enhance the grip. Only resort to hard (metallic) tools like pliers as a last-case scenario, since they can cause larger breakage to your mod.
What is top filling?
Top fill vape tanks are a popular form of vape tanks that allow vapers to refill the tank much more easily. As the name suggests, these tanks are filled from the top, whereas older and more traditional vape tanks need to be removed from the device to be refilled.
How long should I wait to hit my vape after filling?
around 5-10 minutesIt's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
What happens if you fill vape too much?
If you are finding that you are getting through more liquid than usual, your device may be leaking e-liquid. Leakage is quite common with e-cigs because people either overfill their tanks or fill them incorrectly. To solve this problem, try only filling your tank halfway and seeing if the problem persists.
Can I leave juice in my vape overnight?
If you are a flavor chaser, you should avoid leaving vape juice in your tank for very long without use. In some cases, it can alter the flavor of the juice. While some premium e-liquids suggest steeping, other vape juices suffer from a loss of flavor quality over time.
How do you take the top off a Smok vape?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
How do you refill a Smok vape pen?
How To Fill the Smok Vape Pen V2Unscrew the drip tip Anti-Clockwise.Fill with your desired e-liquid.Re-fit the drip-tip cap clockwise.Allow the e-liquid to saturate the coil for around 5-10minutes.
How do you open a vape bottle that won't open?
2:054:05How to EASILY open JAM MONSTER bottles (100ml & 120ml ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipGive it a little squeeze. There. Top. Comes off screw it back on give it a little squeeze.MoreGive it a little squeeze. There. Top. Comes off screw it back on give it a little squeeze.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
How to open a vape tank?
If you don’t have the manual, then the next best option is to look for a marker somewhere near the top of the tank. You can usually open a vape tank in one of three ways.
Why do vape tanks open from the top?
Most vape tanks today open from the top because that’s what most vapers prefer. If you have a tank that opens from the bottom, you have to remove it from your device before you can fill it. A tank that opens from the top is both more convenient and less messy, so that’s how most tanks work these days.
How high can a vape tank leak?
Are you planning to enjoy a drive in the mountains? If you are, you should know that vape tanks are highly prone to leaking during ascents of more than around 2,000 feet. That’s because the changing air pressure pushes the e-liquid through the coil and out the bottom of the tank. If you’re going out for a high-altitude drive, fill your tank halfway to mitigate leaking during your ascent. Alternatively, just hold off on filling your tank until you reach the highest-altitude point of your trip. Your tank won’t leak on the way down; it’ll only leak on the way up.
How to open a tank on a mod?
Twist the tank’s bottom hardware counterclockwise until it comes off. In most cases, the atomizer coil remains connected to the tank’s bottom hardware and comes out of the tank as well. Set the tank’s bottom half aside and continue holding the top half. Grab your bottle of e-liquid.
When to Refill a Vape Tank?
This is a no brainer. What you see and taste should influence your judgment.
Want to Use Less E-Juice?
Are you getting tired of refilling your tank? If so, you should perhaps opt for a vape juice with stronger nicotine content.
Conclusion
Filling a vape tank is as easy as whistling dixies. Take your time to learn how to properly refill a tank, as performing this task wrongly can ruin your coil or cause your vaping device to leak .
Understanding the Different Types of Vapes
Before you can fill your tank, you’ll need to determine what type of device you have. If you have a cigalike the chances are pretty good you won’t have to worry about refills. Most of these devices utilize pre-filled cartridges that allow for maximum convenience without having to learn how to fill a vape pen with juice.
How Often Will I Need to Refill My Vape Tank?
How often you’ll need to refill depends on a variety of factors that influence juice consumption. Nicotine content, wattage, and even the style of the tank all play a role in how often you need to refill. A low-nicotine, sub-ohm tank at high-wattage will definitely need a steady supply of juice.
Tips to Use Less Vape Juice
Switching to a higher nicotine content can often reduce the need to vape as frequently. It’s important to change your device as well, as a tank designed to output large amounts of vapor will send too much nicotine your way. Too much nicotine can make you ill, so a balance must be found as you explore. Changing styles can also help save juice.
How to take a vaporizer apart?
The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.
How long should I let my e-liquid settle?
Step 5: Let your e-liquid settle. When everything’s back in place, it’s always best to allow your e-liquid to ‘steep’ inside your tank for 5 minutes. Your coil will then be primed to deliver a supreme vaping experience with optimum flavour.
Step 5
Wait for 2-3 minutes, to allow the coil to become saturated with e liquid. After that, your tank is ready for use.
Step 1
Unscrew the bottom connector from your tank, and remove the vape coil by gently pulling it out.
Step 2
Drip a few drops of e liquid onto the coil. Gently dousing the coil in e liquid helps extend its lifespan. Then, re-insert the coil back into the tank.
Step 3
Unscrew the metal bottom connector to gain access to the tank chamber.
Step 5
Leave the coil to saturate for a few minutes. After that, your tank is ready for use.
Guides & Help with Tanks and Coils
As you can see, refilling your tank is nothing to worry about. As such a key part of everyday vaping, this process has been expertly designed to be as smooth and simple as possible.
How to tell if a tank is top or bottom filler?
Often, you can tell a top filler because between the drip-tip and the tank will be a plastic ring layer with an oval opening, that oval is where the tank would like you to fill it. Bottom fill tanks are becoming more common and will need to be flipped upside down to load.
How to know if a vape is easier to refill?
Any vape is easier to refill when you know how it opens and how it is meant to be loaded. Take a close look at the tank and examine the pieces.
How to fill a vape with no access hatch?
If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening.
What is the oval opening on a unicorn vape?
The oval opening in top fill vapes is designed to direct your unicorn tip to the correct place. But even without it, all you have to do is try to get the liquid to flow down the side of the glass. Be careful not to over-fill your vape. Many tanks have fill lines. If yours doesn't, stop before the tank is 3/4 full.
Do you need to dump out e-liquid?
If the remainder is fresh and you want to mix flavors, however, the dump-out is not necessary.
Do you have to be a first time vaper to use a vape tank?
April 19, 2019. You don't have to be a first-time vaper to be completely stumped by a vape tank. To be frank, vape tanks come in all shapes, sizes, and designs. Some open from the top, some open from the bottom, and some are weirdly unique to their model.

When to Refill A Vape tank?
How to Fill Vape Tanks
- Top-Fill Vape Tanks
Step 1:With every tank, you need to prepare your coil. To get access to the coil, simply remove the bottom of the tank. The coil should slide right out of the tank. A few drops of e-juice should be enough to prime your coil. To be more specific, try to put at least 1 drop of e-juice onto the cotto… - Bottom-Fill Vape Tanks
Step 1:As I mentioned earlier, with every tank, we start with the preparation of the coil. This is done to prevent burning the cotton and to extend the life of your coil. First, remove the bottom of the tank. The coil should slide right out of the tank. Step 2:Let a couple of drops of e-juice trickle …
Want to Use Less E-Juice?
- Are you getting tired of refilling your tank? If so, you should perhaps opt for a vape juice with stronger nicotine content. Doing so will lower your need to vape regularly. However, be careful not to go for a sub-ohmtank here as it will produce large amounts of vapor, thereby sending too much nicotine your way. Instead, get an MTL (mouth-to-lung)tank that prioritizes providing sufficient ni…
Conclusion
- Filling a vape tank is as easy as whistling dixies. Take your time to learn how to properly refill a tank, as performing this task wrongly can ruin your coil or cause your vaping device to leak. Through repeated attempts, you’ll be able to shave minutes off your tank-refilling time. In most cases, tanks are either top-fill or bottom-fill. So, you’d have to fill your tank according to its desig…