Kangertech Subvod is a very simple to use vape pen kit, all you will have to do is unscrew the top of the tank to fill it with e-liquid and you are ready to vape. TopTank Nano tank with 0.5 ohm SSOCC coil will create very good flavour and vapour. Adjustable airflow control will help you to find the perfect position for a tighter or looser drag.
How to fill a vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming. How to fill a vape pen? Please wait 5 minutes for the e-liquid to soak into the coil completely. The above procedure is not the only way to load the tank of your vape pen.
How do you fill a top-fill vape?
If you need to fill your top-fill vape, start by unscrewing the airflow base at the bottom of the vaporizer and pulling out the coil. Next, prep the coil by dropping 1 drop of e-liquid onto each cotton hole located on the coil.
Should you stir your vape pen between sessions?
Both require proper heating chamber packing, however, a combustion vape pen might need to be stirred in between vape sessions given that it is igniting the dry herb from the bottom up via a hot coil – versus combustion vapes that heat like an over. For one thing, there will likely be extra things you can do that will depend on your vape pen.
How to charge a vape pen without juice?
Charge the batteries using the chargers supplied by the manufacturer. Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming. How to fill a vape pen? Please wait 5 minutes for the e-liquid to soak into the coil completely.
How do you change the coil on a Kangertech Subvod?
1:033:49It comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out toMoreIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out to put your new one in just put it in to write it in I always recommend taking a few drops of liquid.
How long does a Subvod coil last?
Open it completely for D2L vaping or adjust it to your M2L vaping style. The supplied SS coil will last beginners up to 3 weeks. I've been using the SubVod kit moderately for a full week and the coil is still in pristine condition. To make sure your coils last longer try to avoid heavily colored liquids.
What is Subvod vape?
About SUBVOD kit But unlike the EVOD, the SUBVOD allows you to use sub-ohm tanks and take advantage of the vapor and flavor benefits of sub-ohm coils. Battery features Short circuit protection, Low resistance protection, Overcharge protection. Tank features TOP-FILLING Design and Direct-lung inhale from 15W to 60W.
How do I open my Kangertech vape tank?
0:121:58Place the top tank mini in vertical position with the drip tip on the top unscrew.MorePlace the top tank mini in vertical position with the drip tip on the top unscrew.
What coils for Kangertech Subvod?
100% Genuine Kangertech Kanger New SSOCC Replacement Coils 0.5ohm (Stainless Steel Organic Cotton Coil) for Subtank Series / Toptank Series / SUBVOD / Nebox 5Pcs/Pack (5)
How do you tell if a coil is burnt?
1. Your Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. When you vape, you'll experience a truly horrible 'burnt' taste in the back of your throat – acrid and unpleasant, it can even make you feel sick.
How do you turn on a Subvod vape?
6:3911:59That's the whole thing right there okay to turn it on all you have to do is hit that power or fireMoreThat's the whole thing right there okay to turn it on all you have to do is hit that power or fire button five times. And now it flashes and tells you that it's turning on.
How many watts is a Kangertech Subvod?
The KangerTech Subvod is a high-performing and incredibly appealing device coming into the market for around $36.00....Kanger Subvod Tank Specifications.Kanger Subvod TankDiameter:18.5mmMinimum Coil Resistance:0.4ohmWattage:15-60W4 more rows•Apr 28, 2017
How do you refill a Kangertech vape pen?
0:060:51The kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
How do you fill a Kangertech Nano?
0:000:56And then down those slots on the side and just in the directions house make sure to not go up on topMoreAnd then down those slots on the side and just in the directions house make sure to not go up on top up above that middle tube which is almost all the way to the. Top. Like that put the top back on.
How do you fill a mini vape?
0:202:03Simply twist the top insert. The tip of your liquor bottle into the hole and squeeze.MoreSimply twist the top insert. The tip of your liquor bottle into the hole and squeeze.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
Does Vapor Authority ship knockoffs?
Vapor Authority does not carry any clones or knockoffs whatsoever—guaranteed! Same-Day Shipping: At Vapor Authority, we are dedicated to providing you the best shopping experience possible. To help further this effort, we offer same-day shipping on all orders placed by 12:00 PM (Pacific Standard Time).
Can you charge a Kanger vape with a USB cable?
Kanger very smartly fashioned the SUBVOD Battery to be charged with a standard micro USB cable. This allows you to charge your device on any USB outlet, computer, or even in the car.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
Can you use a sub ohm tank on a mod?
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils.
Can a 0.2 ohm atomizer be used with a regulated mod?
For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage.
