how to fill a mermaid vape tank

Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer

to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.

Full Answer

How to fill a vape tank?

The first step is to get your tank open and prepare to fill it. If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now. Use force if there is a button, but do not wrench it too far open. Usually, these swivel a certain distance, then stop.

How do you fill a vape pen with no hatch?

If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening. If your vape is a bottom fill rig, then you will need to flip the entire tank head upside down.

Does the top of your vape tank swivel open?

Does the Top of Your Vape Tank Swivel Open? If your vape tank is a top filler, the drip tip piece may be built to swivel open with the flick of a thumb or opening of a latch. this can make it quick and easy to refill on the go once you know what you're doing. Take a quick look to find out if this exists on your vape model.

How to refill your vape device safely?

Precautionary Step: Remove the Tank from the Battery. As a note on safety, always remember to remove the tank from the batter before doing anything else with the device. The first thing you should do is investigate the vaping device to find out more about it. Any vape is easier to refill when you know how it opens and how it is meant to be loaded.

How high can a vape tank leak?

Are you planning to enjoy a drive in the mountains? If you are, you should know that vape tanks are highly prone to leaking during ascents of more than around 2,000 feet. That’s because the changing air pressure pushes the e-liquid through the coil and out the bottom of the tank. If you’re going out for a high-altitude drive, fill your tank halfway to mitigate leaking during your ascent. Alternatively, just hold off on filling your tank until you reach the highest-altitude point of your trip. Your tank won’t leak on the way down; it’ll only leak on the way up.

How to open a tank on a mod?

Twist the tank’s bottom hardware counterclockwise until it comes off. In most cases, the atomizer coil remains connected to the tank’s bottom hardware and comes out of the tank as well. Set the tank’s bottom half aside and continue holding the top half. Grab your bottle of e-liquid.

How to open a vape tank?

If you don’t have the manual, then the next best option is to look for a marker somewhere near the top of the tank. You can usually open a vape tank in one of three ways.

Why do vape tanks open from the top?

Most vape tanks today open from the top because that’s what most vapers prefer. If you have a tank that opens from the bottom, you have to remove it from your device before you can fill it. A tank that opens from the top is both more convenient and less messy, so that’s how most tanks work these days.

Can you use a new coil without priming it?

Most modern vape tanks are pretty forgiving if you happen to make a small mistake during a refill. The one thing you shouldn’t do , though, is use a new coil without priming it first. When you prime a new coil, you get the cotton wick completely wet with e-liquid before you begin using it. That’s an important step because you could burn the cotton if you vape with a coil that isn’t completely wet. A coil with a burned wick will always produce a burned flavor; there’s no fix for that. So, in this case, it’s extremely important that you do things right the first time.

How to fill a vaporizer with e-liquid?

Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.

How to put e-liquid in a vaporizer?

Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.

How to remove coil from vaporizer?

Remove the coil from the bottom. Unscrew the bottom metal piece of the vaporizer and set it aside. Then, slide the coil out from inside of the tank.

How to fill a e-liquid tank?

Fill the tank to the indicated line with e-liquid. Unscrew the top connecter from the tank to reveal the access points for the e-liquid. Then, hold the dropper part of your e-liquid bottle up against the inside of the tank. Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank, which indicates fullness.

How to make a liquid e-liquid?

2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.

How to change flavor in a vaporizer?

1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...

How to change flavor of e-liquid?

If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.

How to fill up a vape tank?

With the tank open and empty, insert a pipette of your favourite e-liquid and start slowly inserting the vape juice. Make sure you don’t fill up your tank above the fill-line; we don’t want to overdo it!

How to take a vaporizer apart?

The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.

Step 5

Wait for 2-3 minutes, to allow the coil to become saturated with e liquid. After that, your tank is ready for use.

Step 1

Unscrew the bottom connector from your tank, and remove the vape coil by gently pulling it out.

Step 2

Drip a few drops of e liquid onto the coil. Gently dousing the coil in e liquid helps extend its lifespan. Then, re-insert the coil back into the tank.

Step 3

Unscrew the metal bottom connector to gain access to the tank chamber.

Step 5

Leave the coil to saturate for a few minutes. After that, your tank is ready for use.

Guides & Help with Tanks and Coils

As you can see, refilling your tank is nothing to worry about. As such a key part of everyday vaping, this process has been expertly designed to be as smooth and simple as possible.

Understanding the Different Types of Vapes

Before you can fill your tank, you’ll need to determine what type of device you have. If you have a cigalike the chances are pretty good you won’t have to worry about refills. Most of these devices utilize pre-filled cartridges that allow for maximum convenience without having to learn how to fill a vape pen with juice.

How Often Will I Need to Refill My Vape Tank?

How often you’ll need to refill depends on a variety of factors that influence juice consumption. Nicotine content, wattage, and even the style of the tank all play a role in how often you need to refill. A low-nicotine, sub-ohm tank at high-wattage will definitely need a steady supply of juice.

Tips to Use Less Vape Juice

Switching to a higher nicotine content can often reduce the need to vape as frequently. It’s important to change your device as well, as a tank designed to output large amounts of vapor will send too much nicotine your way. Too much nicotine can make you ill, so a balance must be found as you explore. Changing styles can also help save juice.

How to fill a vape with no access hatch?

If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening.

How to know if a vape is easier to refill?

Any vape is easier to refill when you know how it opens and how it is meant to be loaded. Take a close look at the tank and examine the pieces.

How to open drip tip on vape?

If your vape tank is a top filler, the drip tip piece may be built to swivel open with the flick of a thumb or opening of a latch. this can make it quick and easy to refill on the go once you know what you're doing. Take a quick look to find out if this exists on your vape model. The oval opening should be right below if you succeed.

How to stop vape drips?

If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now. Use force if there is a button, but do not wrench it too far open. Usually, these swivel a certain distance, then stop.

What is the oval opening on a unicorn vape?

The oval opening in top fill vapes is designed to direct your unicorn tip to the correct place. But even without it, all you have to do is try to get the liquid to flow down the side of the glass. Be careful not to over-fill your vape. Many tanks have fill lines. If yours doesn't, stop before the tank is 3/4 full.

How to tell if a tank is top filling?

Often, you can tell a top filler because between the drip-tip and the tank will be a plastic ring layer with an oval opening, that oval is where the tank would like you to fill it. Bottom fill tanks are becoming more common and will need to be flipped upside down to load.

Do you have to be a first time vaper to use a vape tank?

April 19, 2019. You don't have to be a first-time vaper to be completely stumped by a vape tank. To be frank, vape tanks come in all shapes, sizes, and designs. Some open from the top, some open from the bottom, and some are weirdly unique to their model.