- Unscrew the coil and place it to one side.
- Now it’s time to fill it with juice. ...
- It’s also a fairly tight squeeze getting your juice in, so take your time and rest the tip of your juice dripper on the glass and slowly pour the eliquid ...
- Depending on the size of you juice dispenser, the tank usually fills after four or five loads.
Full Answer
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do I open and Fill my aspire tank?
To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping. Fill and reassemble tank.
How do I change the atomizer coil on my aspire tank?
If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in. In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank.
What is the best tank to buy aspire?
Aspire Tanks. 1 Aspire Odan Tank. The stylish and durable 810 honeycomb resin drip tip comes in 6 diffrent colors. The heat resistant construction of the resin ... 2 Aspire K Lite Tank. 3 Aspire Cleito Shot Tank. 4 Aspire Tigon 3.5ml Tank. 5 Aspire Nepho Tank (4.0ml) More items
Step 2
Turn the tank on its side and locate the rubber stopper that closes the tank.
Step 3
Pull out the stopper. The edge of your fingernail works best but the stopper is pretty easy to dislodge and it shouldn't give you much trouble no matter what method you try.
Step 4
Dispense vape juice into the tank. The filling port is relatively small but you should be able to fill the tank using either a glass dropper, a needle nose plastic bottle or an e-juice syringe.
Step 6
Snap the tank back into the top of the unit. The tank is shaped so that it's obvious what orientation it needs to be in order to fit in place. Make sure the tank clicks into place and that it is flush with the top of the unit.
How to open Aspire tank?
Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
What is the Aspire Revvo tank?
Introducing the all new Aspire Revvo tank, a truly ‘out of this world’ design with an innovative, revolutionary, new type of coil, the ARC ‘Aspire Radial Coil’. The 24mm tank comes in two sizes, the TPD compliant 2ml version and of course, the standard 3.6ml version. It has an adjustable top airflow construction and a special spring-loaded filling tube. Whichever you choose (or are forced to choose if you’re in a TPD compliant area), you’ll be amazed by the innovation that Aspire has put into this fantastic new design.
What is Aspire Atlantis V2?
Aspire proudly introduces the Aspire Atlantis V2 Tank. This innovative tank system brings you an all new adjustable airflow control at the drip tip, allowing you to adjust the temperature for a cooler vaping experience.
What is a Revvo mini tank?
The Aspire Revvo Mini Tank is a more compact version of the original Revvo tank, lower profile and slimmer. The ARC (Aspire Radical Coil) sits horizontally in the tank similar to a stove-top design. The design of it is an increased surface area of the coil for great flavor and vapor production. The tank can withstand a power output of 55-65W. To get the full benefit of the ARC Coil, the Revvo Mini has a fully adjustable top airflow with 3 airflow slots. It also fills in the center of the tank, accessible directly through the mouthpiece, sits a spring-loaded filling tube.
What is the Nautilus mini tank?
The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids.
