how to factory reset a vape mod

by Sarah Cummerata DVM Published 2 years ago Updated 1 year ago

Part of a video titled How To Do A Factory Reset on Your IQC Vaporizer - YouTube

0:04

0:31

Once the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I reset my vape mod?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.Aug 23, 2018

How do you reset the drag on a vape?

You can reset your daily puff number by pressing fire and down simultaneously. It locks the device (you cannot fire it or change its wattage when it is locked). When you press all three buttons simultaneously, you enter the clock interface (you must keep pressing fire for 2 seconds to exit).Nov 26, 2021

Why will my vape not turn on?

If still nothing, then it is most likely an issue with the device itself. Either the charging port is faulty, the battery has died completely or the display/LED isn't working properly. Batteries do degrade over time in any device, as is their nature. For removable battery devices, check your batteries.Oct 28, 2021

How do you reset a Voopoo Argus GT?

Argus Pro – Functions

Turn the device on – 5 Clicks of the fire button.
Adjust Wattage – Press/hold the + or – buttons.
Lock Device – Press and hold the fire button and + button.
Reset Puff Counter – Press and hold the fire button and – button.
Change Modes – Press the fire button 3 times quickly.

Dec 13, 2020

How do I reset my Voopoo drag 3?

The puff counter data can be reset by holding the power/fire button and the down/- buttons simultaneously. The Drag 3 runs on Voopoo's Gene Fan 2.0 chip and fires up to 177Watts. There are 2 main modes that can be changed by fast clicking the fire/power button 3 times.Feb 11, 2021

How do you unlock Voopoo drag?

- Lock / Unlock = Press the Fire button and '+' (up) button simultaneously. - Mode Switching = Quickly press the fire button 3 times.

How do I get my vape to work again?

Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.Jun 28, 2020

Why is my vape mod not working?

Screw the coil in very tightly and reassemble the tank. If your vape mod still isn't working, replace the atomizer coil. If replacing the coil doesn't resolve the issue, try using a different tank if you have one. If your mod still isn't working, it's possible that the mod itself has a problem.Jan 10, 2021

Why did my disposable vape stop working?

Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.Oct 22, 2021

How do you reset a Voopoo?

0:00

0:31

Once the reset is complete the vaporizer will vibrate and button lights will. Turn.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn.

Why is my Voopoo not working?

If the Voopoo Find S doesn't work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn't working, an error message should appear on the screen.

How do you unlock the Voopoo Argus GT?

Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device.

Why is my vape ohm error?

Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken. A failing resistance detection component is a serious problem with the device itself and might mean it’s time to find a new vape.

What is the best brand of vape?

There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.

How to fix a coil that tastes burnt?

Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.

Can you vape if your mod is too hot?

It will show overheat protection and and you can not vape it. You need to take out the batteries (if it is replaceable) and let it sit for 30 minutes. If your device becomes too hot that you can't touch it, or if the mod keeps on showing overheat protection even if it is not hot, please click here to contact us.

Why does my vape spit back?

Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.

Why is my e juice not turning into vapor?

The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.

What is the name of the vape that eliminates coil ramp up times?

Chief among Voopoo’s technical innovations is the GENE chipset , which eliminates lengthy coil ramp-up times and can make almost any coil fire instantly. Today, every Voopoo vaping device has some variation of the GENE chipset installed, and the Voopoo Argus and Argus Pro have brought the company’s famed technology to the world of pod vaping systems.

How to charge Voopoo Argus?

To charge the device, connect one end of the included USB-C charging cable to the device, and connect the other end to one of your computer’s USB ports. The device’s display will tell you when charging is complete.

What coils does Voopoo use?

The Voopoo Argus and Argus Pro both work with Voopoo PNP coils. Voopoo recommends a minimum coil resistance of 0.3 ohm for the standard Argus, though, while the Argus Pro supports coil resistances as low at 0.15 ohm. The Voopoo Argus has a maximum operational power of 40 watts, and the Argus Pro has a maximum power of 80 watts.

How many watts does a Voopoo Argus Pro have?

The Voopoo Argus has a maximum operational power of 40 watts, and the Argus Pro has a maximum power of 80 watts. The Voopoo Argus Pro has double the battery capacity – 3,000 mAh compared to a capacity of 1,500 mAh for the original Argus. Both devices charge via USB-C, but the Argus Pro uses a 2-amp charging current, ...

Why does my voopoo argus gurgle?

Voopoo Argus Gurgling. If your Voopoo Argus gurgles during use, you’re inhaling with too much air pressure and are overwhelming the pod’s ability to manage airflow. The excess air pressure is drawing e-liquid into the pod’s atomizer coil assembly and flooding the coil.

Vape-FAQ.com