Accessing the Mode Selection Screen: 3 rapid clicks of the fire button will open up the mode selection screen – something that GeekVape forgot to put in the original user manual. Screen Lock: Pressing the + and – keys simultaneously will lock/unlock the Nova’s screen.
Full Answer
How do I set up my Nova kit?
Geekvape Nova Kit Instruction 1. Turn on: Press the fire button 5 times in quick succession to turn on the device. 2.
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
What is a type 1 vape system?
This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
Do you hit the fire button on your vape?
Your new vape has just arrived and you are ready to set it up, your first instinct will be to hit the fire button or draw on the mouthpiece to see how it works….STOP!!! The most common mistake beginners make is to hit the button or draw on the mouthpiece while the tank or pod is empty, this will cause a dry hit and burn the cotton inside the coil.
How do I unlock my Nova vape?
Geekvape Nova Settings Screen Lock: Press + & – button simultaneously to lock and Unlock the screen.
How do you use Nova Geekvape?
Using the Geekvape NovaFive clicks of the fire button to turn it on and off.Three clicks to enter the menu mode.Up and down to cycle the modes.Fire to accept the mode.Up and down to adjust the other settings in each mode.Hold fire to accept the settings.Fire + up/down adjusts the screen brightness.More items...•
How do you change modes in Aegis legend?
These modes can be accessed by pressing the fire button three times rapidly, then using the + and - buttons to cycle through the modes, and clicking the fire button to cycle through the options within those modes.
How do I change Aegis to Watts?
Long press the fire button to exit settings mode. Up and down to change wattage or temperature. Up and down at the same time to lock screen.
What is TC TCR vape?
The Temperature Coefficient of Resistance (TCR) This specific TCR value of the wire is kept in mind by the vape mod, allowing it to adjust the amount of power being sent to the coil and thus control the temperature.
How much is a Nova vape?
$24.99How Much Is A SMOK Novo? The SMOK Novo X Starter Kit will cost you $24.99. It includes the device, pods, charging cable, and user manual. It has everything you need to start vaping and the option to switch between different pods, which all depends on your preference.
What do the numbers on my vape screen mean?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What is bypass mode?
Bypass mode You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you're using.
How do I change the voltage on my vape?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How do I change the settings on my aegis vape?
To switch between modes, press the fire button three times quickly to open the menu. Press the adjustment buttons to choose your desired vaping mode and hold the fire button to confirm.
How do I change my vape to Watts?
To change your mod setting from voltage to wattage mode, simply press the plus (+) button while at the same time holding down the power button. Likewise, to change from wattage to voltage mode, press the power button while at the same time holding down the minus (-) button.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
What does it mean when a device has no display screen?
Type 1) If your device has NO display screen and NO controls on the side to adjust the power output this means you have a fixed powered device - jump to Step 6. Type 2) If your device has a display screen and controls on the side to adjust the power this means you have a variable powered device - proceed to Step 5.
Introduction – The Nova Kit By Geekvape
The Geekvape Nova is the latest release from a brand that with every fresh release, their reputation for being a high end, trusty vape brand solidifies just a little more…and they’ve been releasing scores of new vaping products over the past 2 years.
Build Quality & Design
On opening the super neat, black box packaging, I discovered I had received the silver and flare resin version…and I squealed with delight…since that was exactly the one I’d had my eye on.
How Does The Geekvape Nova Kit Perform?
Well, put it this way…when you take your first few hits of any kit and your smiling reaction with every hit is, Wow…that’s awesome….then you know you’re onto something good.
Cons
So…if you fancy the classic styling on box mods like the Stentorian Basilisk and Voopoo Drag but want a mod with an up to date chipset that has an outstanding ramp and an accompanying tank that gives you all the flavour and cloud that’s made mesh the talk of the vaping world, then the Geekvape Nova Kit is for you.
First impressions
When I first got this mod, I was very impressed with the overall design. It features a nice color screen and is an average size for a dual-battery mod – maybe even a bit smaller than average. I got the silver and flare resin one, which comes with an impressive paint job.
Build quality and design
The Geekvape Nova is very well built and designed. It looks like a fusion between the old school mods of previous years and the newer style of flashy mods. It has an excellent balance between the two, that most vapers would love. Its design is simple and reminiscent of the classic Sigelei 150, but smaller and more comfortable to hold.
Features and functions
The Nova comes with power mode, TC modes for Ni200, Ti, and SS and TCR mode, as well as a bypass mode and a VPC (watt curve mode.) Pretty much everything you would need in a mod, so no complaints there. Some pre-heat options would have been nice, but since it has watt curve mode, not a big deal.
Using the Geekvape Nova
Navigating the menus of the Geekvape Nova is a pretty straightforward process. If you’ve used a Geekvape mod recently you will know what to expect. Here’s a rundown:
Power mode performance
Testing on this mod was done with Sony VTC5A Batteries. The list the specs at 200 watts, but no volt or amp spec listed sadly. I wish all companies would list all three personally. During my testing, the max achieved wattage was 232 watts, so it is accurately rated and capable of doing a bit more than the 200 watts listed.
Temperature control mode performance
Using SS316L Wire in TCR Mode with a TCR of 92 and in SS mode, I tested six builds:
What’s in The Box
- 1 x Nova Mod
- 1 x Cerberus Tank
- 2 x 0.2 Ohm Super Mesh coils (30-90W range)
- Spare glass and uber o-rings
Features Mod
- Advanced AS Chipset
- 10 ms Fire speed
- Dimensions 88 x 52 x 25mm
- Runs on dual 18650s
Features Tank
- 5.5ml with bubble glass and 4ml with spare glass
- 46 x 27mm with bubble glass
- Adjustable bottom airflow
- Removable 810 delrin drip tip
Build Quality & Design
- Nova Mod
On opening the super neat, black box packaging, I discovered I had received the silver and flare resin version…and I squealed with delight…since that was exactly the one I’d had my eye on. What a looker! With the Nova mod, Geekvape has returned to dual 18650 styling basics, I’m talking cla… - Resin
The resin wrapped around the sides slightly so that when looking at the mod from either narrow side, 2 thin bands of resin are visible either side. The resin patterning is absolutely beautiful and my silver and flare version is rich with oranges, turquoise, green and blue. The resin parts have u…
How Does The Geekvape Nova Kit Perform?
- Well, put it this way…when you take your first few hits of any kit and your smiling reaction with every hit is, Wow…that’s awesome….then you know you’re onto something good. Let’s chat about the AS Chipset. Ramp time, at 10 milliseconds, is the best of the best. Responsiveness is absolutely top-notch throughout. I get flawless new coil and resistance readings. TC is smooth a…
Pros
- Classic look with gorgeous resin detail
- Excellent Ramp
- Outstanding Cloud
- Outstanding Vapour Production
Cons
- Uneven battery drainage
- Thirsty coils (To be expected somewhat)