- To select a mode, give the fire button 3 presses - To switch modes, tap the plus and minus button and the fire button - To set the resistance level and puffs, use the fire button to access the coil or puff settings on the display and then the plus or minus button to adjust it
Full Answer
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
What are the different vaping modes and settings?
The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
How to choose a vape pen and vape mod?
Every vape pen and vape mod will have a set of instructions that will show you how to get good results from it. It’s important that you read them to familiarize yourself with safety precautions, but you can also find plenty of other details about the product you want to buy.
How do I change the settings on my vape?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
Can you adjust a vape?
Most devices have an adjustment ring on the tank that allows you to change the airflow manually – high and low. The higher the airflow the cooler the vape. When you turn the airflow up to its maximum ability, you'll generally experience a smoother and cooler cloud with less overall flavor.
What should I set my wattage to on my vape?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
How do I change my coil settings?
0:261:26How to adjust coil settings in the menu - YouTubeYouTubeStart of suggested clipEnd of suggested clipPower you hit start it'll go blinking and then you can adjust the power down with the left flipperMorePower you hit start it'll go blinking and then you can adjust the power down with the left flipper or up with the right flipper.
How do I make my vape smoke thicker?
Get the Right PG:VG Ratio As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG.
How can I make my vape hit less harsh?
0:202:02Harsh Vape Fix - How to Get a Smooth Vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust try to turn the voltage down. And this means it's going to be less vapor.MoreJust try to turn the voltage down. And this means it's going to be less vapor.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
Does higher wattage give more flavor?
If you want a stronger or smoother flavour: Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.
Does higher wattage burn coils faster?
When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What wattage should I vape at 0.4 ohm?
23 - 28 wattFor example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What does closing the airflow on a vape do?
If your airflow is closed ('narrow' or 'tight'), then your evaporated e-liquid, which is 'hot off the coil', won't have a chance to mix with much room-temperature air, so you'll get a hot, dense, tasty cloud of vapour.
How do lungs heal from vaping?
However, there are certain lifestyle behaviors you can practice to try and accelerate the rate at which your lungs heal.Drink Lots Of Water. ... Eat Healthy Foods. ... Exercise Regularly. ... Cough. ... Clean Your Living Space. ... Practice Deep Breathing. ... Try Steam Therapy.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
Why is my vape burning my throat with new coil?
Some vapers are quick to blame it on a faulty coil, but new coils usually get burnt because they haven't been primed before use. By priming your coil, we basically mean preparing it and getting the wick nice and saturated with e-juice.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
How to reset a sprite tank?
3) Continuously pressing mode button 3 times to unlock the mode button. 4) When install a tank, it will automatic identify its coil material and resistance, press up (+) button for reset, ...
What is the ECO mode on a tank?
When your battery is lower than 40%, it will automatic provide an option to go to ECO (Power ECO) mode. When your install the tank with temperature heating wire (SS, Ti, Ni), it will automatic provide an option to go to STC (Smart TC) mode.
What is the best battery for a vape pen?
The thicker vapor does come at a cost. It uses up your concentrates faster and requires more battery power. The best vape pen batteries are Lithium-ion. These have a higher energy density and can better handle the energy requirements of medium-temperature vaping.
Does low temperature vapor have less flavor?
This setting produces a thinner vapor than higher temperatures. But thin vapor doesn’t mean less flavor. In fact, the low-temperature vapor is actually the most flavorful. The flavors and aromas in cannabis vapor come from the terpenoids (terpenes) within.
Is it safe to vape at high temperature?
High-Temperature Vaping. High-temperature vaping is not recommended. It is not as safe as vaping at low or medium temperatures. As well, the flavor quality is poorer and the experience is less reliable.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
