How to DTL Vape
- Ensure your device sets to a higher wattage
- Fire off your device
- Take a deep inhale
- Breathe with your chest (Optional)
- Let the vapor rest at the bottom of your lungs
Full Answer
What is a DTL vape?
DTL vaping, however, requires the user to breath the vapour straight down into the lungs in a slow and steady fashion without first holding it in the mouth - much the same as simply taking a deep breath.
How much nicotine do I need for DTL vaping?
DTL vaping requires only 3 - 6 mg of nicotine. Higher than 12 mg nicotine is not recommended. Less Flavor: DTL vaping results in less flavor since the vapor goes directly to the lung.
How do I use a direct-to-lung vape?
Draw the vapour into your mouth, in one long draw, and hold it there for a few seconds. 2. Breath in air through your mouth as you inhale the vapour into your lungs. 3. Next, exhale. A direct-to-lung vape is usually used for larger vape devices that use low-resistance coils and lower nicotine levels (0mg – 6mg E-Liquid ).
How to MTL vape like a cigarette?
However, there’s a slight difference in how you MTL vape compared to how you smoke. Step 1: Take a smooth drag into the mouth. Avoid taking short, sharp puffs as you’ve been accustomed to while smoking a cigarette, and instead, ensure you take a long drag.
What is VG vape?
VG is primarily known for vapor production. Contrary to PG, vapers typically look for higher VG blends as the vapor also tends to be smooth. While these e-liquids are suitable for any method of vape inhalation, the DTL method is where these e-liquids shine. Where cloud chasing is the primary goal, the higher VG e-liquids tend to provide the production and smoothness needed.
What is the difference between DTL and MTL?
On the other hand, DTL devices are generally more technical. These devices are usually not as inconspicuous. Typically bigger than your palm , as MTL devices are , they have a few components and aren’t all-in-one. The atomizers are generally large, and the mouthpieces are wider. Paired with a high wattage box mod, the concept of DTL vaping is to produce as much vapor as possible. With that in mind, the airflow is bigger to allow less potency and a more smooth vaping experience.
What is mouth to lung vaping?
Mouth to lung vaping is a popular method in this age of discreet stealth vaping. Mostly resembling the traditional cigarette smoking, this method emulates the traditional cigarette approach while compromising in vapor production. Contrary to DTL, you become limited to the amount of vapor by how much you can pull into your mouth.
Is PG better than MTL?
Known for carrying nicotine and flavoring better than its counterpart, PG is an ingredient to consider for your preferred inhalation method. As previously mentioned, MTL vaping is limited to the amount of vapor you can rest in your mouth. As smoking cessation or stealth vaping being the primary goal, the flavor and nicotine potency plays a more significant part. Higher PG E-liquids provides a better throat hit when the least amount of vapor is preferred.
Is MTL vaping good?
The airflow itself is something to consider when vaping. MTL vaping is best with lower wattage and higher nicotine. Where most MTL vaping devices are generally stealthy, they also have a smaller airflow in the mouthpiece. The mouthpiece itself will let a small stream of vapor through the component where the smoke is generally more potent. Vaping a higher wattage with little airflow, you will notice a significant change in the taste.
How to do MTL vaping?
MTL vaping is a simple method that involves: Slowly drawing the e-juice vapor into the mouth for some seconds. Holding the vapor in the mouth for a few seconds. Opening the mouth and inhaling the vapor into the lungs. Exhalation of the vapor.
How much does a vape starter cost?
Regardless of their design or shape, vape starter kits similarly generate vapor. The price for these devices ranges from as little as $20 to $60 and are classified into four major classes: e-cigarettes, AIOs, pod vapes, and disposable e-cigarettes where some are prefilled while others are refillable types.
What is the right level of nicotine for a lung?
Typically, a high level of nicotine (12 – 60 mg) is the right choice for mouth to lung whereas low-level nicotine (0 – 6 mg) is the right choice for direct to lung.
Does vaping work on lung?
Hits from mouth to lung vaping often work best when using small-size vapes featuring high-resistance coils and high nicotine levels. When dragging vapor from these devices, vapers confess to experiencing the same feeling you would experience when drawing air through a coffee soda straw.
Is vaping a cessation item?
But vapes are not cessation items to smoking though they have assisted smokers to avoid dangers of smoking.
Can vaping catch you?
Even if vaping is not done frequently, addiction will still catch you. Besides, people ignore these facts and vape to satisfy their body cravings. After all, it’s life and people should find methods of keeping themselves happy, and vaping is not an exception.
Can you vape weed?
Concentrates and flowers of cannabis (weed) can be vaped but come with their own vaporizer types that are specified for handling herbs and waxes. Vapers are advised not to purchase vaping devices meant for e-juices to use with cannabis substances unless they are sold as multi-purpose.
How to vape DTL?
To vape DTL style: Step 1: Take a slow and steady drag for around 3 to 5 seconds. No sharp drags are encouraged here. Step 2: Since this style doesn’t require you to hold the vapor in your mouth, let the vapor enter your lungs directly. Step 3: Exhale those large amounts of clouds.
What is DTL vaping?
The DTL ( Direct-to-Lung) vaping style is also popularly known as “Straight to Lung” and “Direct Lung” vaping style. As the name suggests, you simply inhale the vapor directly into your lungs to do this technique. This vaping style is usually preferred by cloud chasers and tricksters. To execute this technique properly, ...
What is MTL mod?
MTL mods can accommodate e-liquid of high nicotine strength. MTL mods produce less vapor, so this style is great for those who want to vape discreetly. Vape devices specifically made for MTL style are smaller and thus, more portable.
How to vape MTL style?
To vape MTL style: Step 1: Take a smooth drag into the mouth. Avoid taking short, sharp drags as you’ve been accustomed to while smoking a cigarette, and instead, ensure you take a longer drag.
What does MTL do?
On the bright side, what the MTL style can do for you is allow you to get a soul-touching nicotine fix in a crowded environment without grabbing any attention. Since the MTL style uses less e-liquid, adopting it will be easier on your wallet as well.
What are the features of a powerful mod?
Outstanding production of clouds. Powerful mods have more features such as airflow mechanism, accurate wattage control, TC modes, and variable wattage, paving the way for a more flexible vaping experience.
How to get a vapor out of your mouth?
Step 2: Keep the vapor in your mouth for some seconds. As you do this, the vapor loses its potency, facilitating a smoother lung experience. Step 3: Next, inhale the vapor to the lungs while drawing in the air simultaneously . Step 4: Exhale. If you want to try this technique, get an e-juice with high nicotine strength.
What Is MTL
MTL stands for mouth-to-lung, which describes the method that you inhale using an MTL device. What is MTL? Basically, it’s similar to how you would use a cigarette, delicately drawing vapour right into your mouth, before you inhale it down into your lungs. We could also call these devices plus-ohm devices.
Verdict
Alright, that’s it for today’s blog post! I hope you’ve learned something from this post, and know what is MTL, DTL and RDL.
What is a DTL inhaler?
What is DTL or a Direct to Lung inhale? Direct Lung Inhale (DLI) / Direct to Lung (DTL) / Direct Lung (DL): Inhaling vapor straight to the lung. Think about sucking in air from a balloon. Another way to think about it is inhaling straight from your lungs instead of your mouth.
What does MTL mean in vaping?
Mouth to lung, or MTL inhale and direct to lung, or DTL, are words you will hear often in the vaping community. But what does MLT and DTL mean exactly?
How much nicotine is needed for DTL?
DTL vaping requires only 3 - 6 mg of nicotine. Higher than 12 mg nicotine is not recommended. Less Flavor: DTL vaping results in less flavor since the vapor goes directly to the lung. The more air flowing through your coils, the vapor density decreases which results in less flavor but more voluminous clouds.
Why do people use MTL vapes?
MTL vape devices are recommended to smokers since it mimics the smoking sensation. Before sub-ohm vaping became popular, all vaping devices were MTL to create a smoother transition into vaping.
What are the characteristics of DTL mods?
Here are common characteristics of DTL vaping: High Wattage Devices: Increased power equals greater cloud production resulting in higher e-liquid consumption. Tend to use higher VG ratio for smoother throat hit and thicker clouds.
Why is throat hit important in vaping?
Throat hit is essential in vaping to replicate the feeling smokers are accustomed to when smoking cigarettes. Lower Nicotine Strength: High nicotine strength is not necessary due to an increase in power.
What is sub ohm coil?
Sub-ohm coils: Coils are less than 1.0 ohm. Coils with lower resistance increase cloud production. DTL devices are not limited to sub-ohm coils and can use higher resistance coils depending on the device. Airflow Control: Larger mouthpiece but can adjust airflow to increase/decrease throat hit.
Why is vaping so slow?
Vaping needs a slower, longer draw due to the way the device functions. To vape, E-Liquid needs to be drawn through the coil to turn it into vapour. Too shallow a draw, and you won’t have a satisfying vaping experience.
How long does it take to inhale a vape?
Timing is also important when it comes to inhaling. It normally takes about 30 seconds for you to feel the effects of your vape, so you’ll probably want to wait at least this long between draws.#N#After you’ve finished a vape ‘session’, put your vape down and leave it to cool for at least a few minutes before you inhale again. Not only does this allow for the coil to cool down, but it also reduces the risk of you getting a sore or irritated throat. This is especially important when you’re using an E-Liquid or nic salt with a higher strength of nicotine.
What is the difference between a DTL and a MTL tank?
The main difference you will notice between a MTL tank and a DTL tank is the mouthpiece. On the MTL tank the mouthpiece will be a lot narrower to mimic the act of smoking. Whereas the mouthpiece on the DTL tank will be a lot wider allowing for more vapour to be inhaled.
What does tight airflow mean on a vape?
A tight airflow will mean that on a MTL hit, by the time you inhale…your lungs are in need of oxygen and will welcome any they can get (an easy hit, in other words). A tight airflow also provides a warmer vape. The main difference you will notice between a MTL tank and a DTL tank is the mouthpiece.
How is MTL vaping different from smoking?
Vaping is different to smoking for many reasons but the actual way you vape is also different. MTL Vaping is ‘kind of like’ cigarette smoking but with a slight difference. Simple steps on how you vape mouth to lung. Take a smooth draw of vapour into the mouth. (Don’t take short, sharp drags like you would on a cigarette) A slightly longer draw is ...
What tank works with 0.7 ohm coil?
One such tank that works well with a 0.7Ohm coil and MTL vaping is the Aspire Nautilus 2s, highly recommended. However, most other MTL tanks will be around the 1.5-1.8Ohm mark which is a great starting point if MTL is really your thing.
How to change airflow in vaping?
This is done through a ring on the top or bottom of the tank and be fully opened or closed. An open airflow means that whilst you inhale your vapour, more air is allowed to flow through the tank and into your lungs unrestricted.
What does lower resistance mean in vaping?
A lower resistance coil/tank means you’ll be able to operate it at a higher wattage. Lower resistance coils are what we need when sub ohm/Direct to Lung vaping. Lower resistance coils are made with thicker wires that allow more power/wattage to be fed to the coil than a higher resistance coil would.
What is vape atomizer?
Vapor is made in what’s called a vape atomizer, sometimes called a vape tank. It’s a self-contained chamber electrically connected to the vape mod. It houses a resistance heating element—ususally a metal coil—and an absorbent wick saturated with e-juice (containing similar base ingredients to theatre “smoke”).
What size batteries are used in vape mods?
The replaceable batteries in vapes most frequently used in vape mods are 18650, 20700, 21700 sizes. These cells are much more powerful than your average remote controller batteries and require a firm understanding of battery safety.
How many ml of nicotine is in a vape?
High nicotine vape juice typically comes in smaller bottles (30 mL or less), and bottles of lower nicotine juice will typically come in larger bottles (30 mL or more). Nicotine preference depends on the user, but there are general recommendations for the best experience with different devices:
What is a mod in vaping?
The term “mod” is a nod to the early days of vaping when users modified flashlights for more power.
How does a vape work?
All vapes work on the same premise: a battery source ( vape mod) powers a heating element (coil) that vaporizes e-juice in a small chamber (atomizer). The user then inhales the vapor through a small mouthpiece. A vape works as a complete system. No one component is the vape, it’s what you have when it all comes together.
What is vaping juice?
The definition of vaping is the act of inhaling smoke-looking vapor from an electronic cigarette or vape device. Vaping simulates smoking but in a less harmful manner. A flavored nicotine liquid called vape juice (e-juice) is what’s in a vape, but not all vapes contain nicotine.
What is a vape?
Vapes are handheld electronic devices for adults that produce inhalable fog-like vapor, often with nicotine and various flavors. The first retail vape was an electronic cigarette designed to look like a tobacco cigarette. Created by Hon Lik, the e-cigarette was released by the China-based company, Ruyan, in the early 2000s.
