Take a cotton swab and gently clean your Suorin Air’s airflow sensor, contact points (metal bits at the top), the rubber piece on top of the contact points, and any other places where you see juice. After this, use another cotton swab or a rolled up tissue, and clean out the contact points on the bottom of your pod.
Full Answer
How do I change the juice in my Suorin air?
0:221:49How To: Fill and Prime Suorin Air | Vaporleaf - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow that our fill ports exposed in order to fill you'll just want to get your juice bottle place theMoreNow that our fill ports exposed in order to fill you'll just want to get your juice bottle place the tip in there and fill the pod all the way up remove the tip. And then replace the rubber plug.
How do you open a Suorin Air Plus?
0:135:48Suorin Air Plus disassembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe plastic piece hooks onto the bottom and the side so when you undo it just be gentle. And makeMoreThe plastic piece hooks onto the bottom and the side so when you undo it just be gentle. And make sure it comes off the side first. So what I did was just kind of break it loose like that.
How long does a Suorin Air Plus pod last?
With average usage, Suorin Air pods last 1-2 weeks.
How long do you let a Suorin air pod soak?
The recommended time for a Suorin pod to soak is 3-5 minutes.
How do you take apart Suorin air?
0:304:33Fix your Suorin Air in 3 Minutes!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a q-tip that'll work fine so let's get right to it all I'm gonna do is take my flatheadMoreYou can use a q-tip that'll work fine so let's get right to it all I'm gonna do is take my flathead insert here I'm going to grip. The Suren err on the sides.
How do I refill my Suorin Air Plus pod?
0:041:45How To: Fill and Prime The Suorin Air Plus Pod Vape | Vaporleaf - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm just going to insert the tip of my juice bottle into the pod. And squeeze. And then I'm gonnaMoreSo I'm just going to insert the tip of my juice bottle into the pod. And squeeze. And then I'm gonna go until there's about a pea-sized bubble of air left in there you might be able to see that. Once.
How do you take care of Suorin Air Plus?
Maintenance. The Suorin Air Plus is very low maintenance. The pod is disposable and will need to be replaced every week or so, depending on how often it is being used. The metal pins on the top of the battery and bottom of the atomizer should also always be clean.
Is the Suorin Air Plus worth it?
The Suorin Air Plus retains the iconic design of the original and features some improvements, such as improved battery life and increased e-liquid capacity, but performance wise I personally prefer the old Suorin Air. The draw of this new version is way to airy for me, making mouth-to-lung vaping very awkward.
Why does my Suorin air crackle?
The Wattage/Voltage Level Using a sub-ohm vaping setup is the first reason for an instant crackle. An RTA with a fairly open airflow forces air and increases the productivity of the vape. More e-liquid will condensate and less turn to vapor, thus an excess of liquid makes the noise.
Is it bad to hit a burnt vape?
Burnt hits are one of the worst things a vaper can experience. And it can happen with almost any vape, from disposable vapes to cloud-chucking sub ohm tanks! It can ruin your day, and even worse, steer you away from vaping. While there are many reasons for a burnt hit, the good news is that most can be avoided.
Why is my vape burning my throat with new coil?
Some vapers are quick to blame it on a faulty coil, but new coils usually get burnt because they haven't been primed before use. By priming your coil, we basically mean preparing it and getting the wick nice and saturated with e-juice.
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.
How to clean Suorin Air pod?
Take a cotton swab and gently clean your Suorin Air’s airflow sensor, contact points (metal bits at the top), the rubber piece on top of the contact points, and any other places where you see juice. After this, use another cotton swab or a rolled up tissue, and clean out the contact points on the bottom of your pod.
What to do if Suorin Air isn't hitting?
If your Suorin Air isn’t hitting, or firing, first make sure that it’s charged. If it is charged, thoroughly clean your device and your pod. If cleaning isn’t effective, buy a new pod. If buying a new pod doesn’t work either, you may need to buy a new Air.
How to clean out Suorin pod?
You can also clean out the inside of your Suorin’s skin (metal piece that surrounds the electronics) by inserting a tissue. After this, put the rubber piece back on the electronics, and put the metal skin back on. Put your pod back on, and see if your Air works! If it doesn’t, keep reading to check out the next step.
Why is my Suorin Air not firing?
You need to make sure that your Suorin Air is charged. As simple as this is, it’s one of the most common reasons for Air’s not firing properly. This step sounds very obvious, but if your Suorin is out of battery, it isn’t going to hit at all. Before you try anything else, plug in your Air for a few minutes, and make sure ...
Does Suorin Air last forever?
Suorin Air’s are built to be somewhat disposable, and they’re definitely not going to last forever. Things wear down and break over time, juice leaks into the device, and if you’re like me, you drop things a lot. To put it simply, your Suorin Air is going to break eventually, as is every other device that you own.
