How to unscrew a vape tank?
Jul 07, 2017 · In this video, we show you how to take your SMOK tank apart, clean it, prime a coil & reassemble it
How to disassemble a vape device?
Nov 04, 2018 · Many face the problem of a seized tank. This can be a big hassel like it was for me. I came back to it after the day and tried wrapping rubber bands on eithe...
What happens if your vape tank is stuck to the battery?
Apr 04, 2019 · Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers. Dribble a Little Vape
How do you clean your vape device?
Sep 18, 2017 · Make sure you follow any manufacturer-provided instructions while using these basic steps as a guide: Disassemble your vape device, removing the tank. Dump out any remaining e-liquid. Remove the worn out coil. Install a fresh coil. Reassemble your device.
How do you disassemble a vape tank?
How to Take Apart a Vape TankTo remove the atomizer coil, unscrew it by twisting counterclockwise.To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place.To remove the mouthpiece, lift it straight up to pop it out of its socket.Mar 14, 2020
How do you disassemble a Smok tank?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou hold it tight here unscrew your bottom as you can see there's no ring right in here always makeMoreYou hold it tight here unscrew your bottom as you can see there's no ring right in here always make sure it's on correctly. And no tears or breaks on it put that off to the side.
How do I unscrew my tank atomizer?
4:489:44Vape Tricks Episode 1 Unscrewing the impossible - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay just unscrew the top part a little bit okay maintain it in its place and then unscrew that theMoreOkay just unscrew the top part a little bit okay maintain it in its place and then unscrew that the bottom part and you will always end screwed easily both parts even if they are tight.
How do you change a vape tank?
2:575:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipStart by applying a firm grip to the base near the bottom of the tank. With your other hand beginMoreStart by applying a firm grip to the base near the bottom of the tank. With your other hand begin twisting the top portion of the tank in a counterclockwise manner. Now that the coil head is exposed.
How do you clean a pod tank?
0:322:21How To Clean Your Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe tank gently with warm water and with a little bit of soap. Read the instructions in the manualMoreThe tank gently with warm water and with a little bit of soap. Read the instructions in the manual to make sure you can use something other than just warm water take a cotton swab.
How do you remove atomizer from vape?
Just grab that thing and start twisting. I had to use a rubber pad to get grip on it. It's tight but it'll come off. If rubber grips don't work, just get a pair of needle nosed pliers and grab the bottom of the tank and twist it off the mod.Feb 19, 2016
How to tear apart a vape atomizer?
To tear apart the vape tank and vape atomizer, you'll have to attempt to unscrew the vape tank. Usually, there need to be a few other steps included to fully unscrew the vape tank. First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank.
What is the battery of a vape?
Of course, the vape battery is an absolutely critical component of your device. This is what gives your device the power to be able to heat up e-liquid to turn into vapor. This is what allows your vaping sessions ...
What happens when a battery heats up?
When any material heats up and cools down, it expands and contracts. Batteries are made of specific materials that minimize this expansion and contraction, but it still occurs in minute amounts. Over time, these small amounts of shift can cause cracks to form.
Can you clean a vape mod?
Even though vape mods are designed with customizability in mind, cleaning them can still be a chore. From the many already built-in parts to the extra technology you add, the little nooks and crannies of your box mod that you need to take care of add up quickly. Fortunately, there are some good tips and ideas that will help you properly disassemble ...
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
How big is a jam jar pad?
Or rather, made to get jam jars unstuck and will work perfectly for your purposes. This pad is usually brightly colored and about 3-5" by 3-5", thin, floppy, shiny-plastic looking, and has little ridges or bumps over the surface.
What is the sticky pad on my mouse pad?
The back of your mousepad is covered in a sticky foam that keeps it from sliding around on your desk when you move the mouse. This sticky pad could be exactly what you need to get a good grip on the stuck part of your tank and finally twist that sucker apart.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
What to do if someone is badgered into coming over?
If there's anyone else in your house or who can be badgered into coming over for any ol' reason, consider asking them to try opening the tank. Especially if they have larger hands, are visibly more muscular, or have a creepy tendency to perform feats of strength beyond their apparent capabilities.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
How Often to Clean a Vape
When people talk about cleaning vape devices, they’re usually referring to their vape tanks.
How to Clean a Vape Tank
Cleaning your vape tanks is an important part of getting the best vaping experience possible. Most vape tanks are designed for continual use, but proper cleaning will extend its life and ensure that you are not getting unwanted flavors in your juice.
How to Clean Vape Coils
Unfortunately, there really isn’t a way to clean your coils. Getting them wet will lead to a quick burnout, and there’s no secret method for vape coil cleaning.
How to Clean a Vape Battery
Before you get ahead of yourself, you’re not going to be taking apart the battery and dunking it in the water! Your battery contains all of your vape’s electronic components, and mixing electricity and water is a big no-no.
Shop for Vape Essentials at DIRECTVAPOR
Whether you’re on the hunt for a brand-new tank, replacement coils, or just some unique e-liquid flavors, DIRECTVAPOR has anything and everything you need. We’re an online vape store with an unbeatable selection of top-quality products, with the best vape deals and discounts on the market.
How to remove a vape tank?
Remove the mouthpiece and battery portions of your vaporizer. Take off the top and bottom of the tank and discard any remaining e-juice. Continue to take apart the vape tank and the pieces attached to it, taking care to remember where each piece goes.
Why do you need to clean your vape tank?
This chamber, called the vape tank, needs to be cleaned regularly in order to prevent damage and maintain performance. For a quick clean or between different types of e-juice, a warm water rinse will often suffice.
How to clean a septic tank with alcohol?
Dampen a microfiber cloth or paper towel with the alcohol and rub the dirtied areas until the e-juice is removed. Wipe and rinse with warm water. While isopropyl rubbing alcohol (90%) also works well, it can be toxic if you don’t rinse and dry the tank extremely well after cleaning.
How to clean a e-juice tank?
Run warm water through the tank. Hold the tank itself under a faucet running warm water for 20 seconds or so. Adjust the water to be as warm as possible without being too hot to touch. This will help rinse away residual e-juice. Use a faucet that provides a moderately powerful stream. If you clean your tank regularly and prevent e-juice ...
How to clean a water tank with a paper towel?
Pull paper towel through the tank. Twist a small sheet of paper towel or small microfiber cloth at the corner and fit it into one end of the tank. Twist the material and pull it back and forth through the tank to wipe residual water away. ...
What happens if you don't clean your e juice tank?
If you don’t clean the tank fully when you switch to a new flavor, you may experience “flavor ghosting,” or the taste of a previous flavor mixed into a new flavor.
How to tell if o-rings need replacing?
Change the o-rings whenever you're uncertain about their condition. If your vapor tastes burnt, even after a fresh cleaning, it’s likely time to replace the coil. Other signs that the coil or another piece may need to be replaced include less vapor coming through your device, any leaks, or an unsatisfactory vape.
Seperate The Tank From the Base
From what I read online, people have said that you should put the tank on the device and rock it back and forth while forcefully pulling upward. That part is true, but I’ve found that it helps to get the separation process started with some pliers first.
Filling The Tank
Inside the tank, you’ll find some sort of wicking material, which looks like cotton. It sits on top of a plastic circle built into the tank. On that circle is four small bean-shaped holes that allow the e-juice to pass onto the wicking material and then onto the wicks on the base.
Additional Notes
I have a couple of things to note after doing this. First, I don’t think you can do this indefinitely. One of the tanks I did this with eventually got really loose. When I screwed it onto the device, the tank started to spin separately from the tank base, so I would worry about the tank coming apart in my pocket.
The Full Tear-Down
For anyone who really wants to nerd out, I also fully tore down the base. Watch the video above to see it in all of its glory.
