how to disassemble tecobo vape tank

by Titus Stoltenberg Published 3 years ago Updated 2 years ago

First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank. Next, run a tiny screwdriver through the airflow slots and tap around a bit to loosen up the seals. If the tank still isn't budging, then place the whole segment in the freezer to make the seal loosen even more.

Full Answer

How to unscrew a vape tank?

May 13, 2018 · First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank. Next, run a tiny screwdriver through the airflow slots and tap around a bit to loosen up the seals. If the tank still isn't budging, then place the whole segment in the freezer to make the seal loosen even more.

Should you know how to disassemble and reassemble your vape?

Jul 07, 2017 · In this video, we show you how to take your SMOK tank apart, clean it, prime a coil & reassemble it

What to do when your vape mod stops working?

Jul 28, 2016 · The most common tasks a vaper needs to do is filling up a tank or replacing a used coil for the new Best E-cig coils. Both of these tasks in maintaining your e-cigarette are easy and will require you to disassemble your Iceboxvape.com Atomizer tank. In this article, we help you to introduce to the maintenance of your electronic cigarette and will equip you with the …

How do I fix a stuck e-liquid tank?

Feb 27, 2019 · Hello Guys, It is a easy tutorial to change a gasket on ijoy tank. If you have more question or need more tutorial videos, welcome to tell us. Email: service...

How do you disassemble a vape tank?

How to Take Apart a Vape Tank

To remove the atomizer coil, unscrew it by twisting counterclockwise.
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place.
To remove the mouthpiece, lift it straight up to pop it out of its socket.

Mar 14, 2020

Why can't I unscrew my vape tank?

Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.Apr 4, 2019

How do I unscrew my tank atomizer?

Part of a video titled Vape Tricks Episode 1 Unscrewing the impossible - YouTube

4:48

9:44

Okay just unscrew the top part a little bit okay maintain it in its place and then unscrew that theMoreOkay just unscrew the top part a little bit okay maintain it in its place and then unscrew that the bottom part and you will always end screwed easily both parts even if they are tight.

How do you open a disposable vape tank?

You'll need to unscrew the e-cig mouthpiece for this initial step by twisting it off. Fully rotate the mouthpiece counterclockwise for at least three times until the thread that keeps it in place is loosened. If you are unable to do this, then it means that you cannot refill the cartridge.

How do you get a stuck tank out of a Mod?

If the mod is intact, try a better grip. Similar to tank jams, sometimes your device just needs a little extra torque to release the tank from your mod. Find a sticky rubber material such as a mouse pad or rubber band to strengthen your grip.Aug 3, 2020

How do you get a cart unstuck?

Method #1: Apply Heat

Heat simply thins out the liquid, like when you put honey in the microwave. Therefore, a little bit of heat could thin out the liquid stuck in the mouthpiece so that it runs back down into the cartridge.Apr 27, 2021

How do you clean a vape tank?

In that case, you can follow these steps for deeper cleaning.

Remove wicks from coils.
Dry burn your coils lightly (don't let them glow too much)
Remove atomizer from your mod.
Place under running water.
Brush them lightly with a toothbrush or a coil cleaning tool.
Rinse once again.

More items...

Where is the atomizer located in a vape?

Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.

How do you open a disposable puff bar?

Part of a video titled Puff BAR Disposable How To Refill Puff Bar - YouTube

0:34

3:20

And you want to pry the top off with the arrows out just like so it's come and come right off youMoreAnd you want to pry the top off with the arrows out just like so it's come and come right off you see this little piece right here you want to pull it out.

How do you fill a disposable vape tank?

Part of a video titled How to Fill the CCELL Glass Disposable Vaporizer Pen - YouTube

0:06

1:28

And that's how you'll activate all right i've pre-filled my syringe with your oil take your oil ofMoreAnd that's how you'll activate all right i've pre-filled my syringe with your oil take your oil of choice and just go to the side of the tank. There. And inject it nice and slow.

How do you fix a disposable vape?

Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.Oct 22, 2021

Disassemble and reassemble your vape box mods

Even though vape mods are designed with customizability in mind, cleaning them can still be a chore. From the many already built-in parts to the extra technology you add, the little nooks and crannies of your box mod that you need to take care of add up quickly.

Box mod firing button

One of the most difficult parts of a mod to take apart is the firing button. This button is usually made up of a few parts. There is the button itself, which needs to be taken off and wiped down. Below that, you'll have a spring, which can also be taken off and scrubbed.

The vape battery

Another important part to know how to properly remove and reattach to your vape device is the vape battery. Of course, the vape battery is an absolutely critical component of your device. This is what gives your device the power to be able to heat up e-liquid to turn into vapor.

The vape tank and atomizer

The third and definitely not final part that you should definitely know how to disassemble and reassemble is the vape tank and vape atomizer complex. You may already know how to do this if you change your coils often, but it can never hurt to have a reminder.

Disassembling Bottom-Coil Clearomizers

In bottom coil, you need to unscrew the bottom to get access to the E-cig coils. After unscrewing, the base will come out along with atomizer head and stem will be still inside the clearomizer. This indicates that you can access the coil without emptying the tank too by inverting the clearomizer before unscrewing.

Disassembling Top-Coil Clearomizers

In top-coil clearomizers, the stem will also come out while disassembling the clearomizers. This indicates that to get access to the coil; the tank needs to be emptied first. For only refilling, these clearomizers have drip tip that screws into place, and you can get access by just removing the drip tip.

Disassembling Sub Ohm Tanks

In sub-ohm tanks, the working is similar to bottom coil clearomizers; the base needs to be unscrewed without emptying the tank. For the refill, the sub-ohm tanks are mostly filled from the bottom.

Vape-FAQ.com