how to dilute vape juice with water

Dilute Vape Juice With Water.

• Can not use water more than five percent.
• The water should be distilled water.
• The ratio should be one drop of distilled water per 2ml.
• If your vape juice has a high VG level, then you can use water.
• If your vape juice is PG based, then do not use water. Why should you dilute with water?

Full Answer

Can You Add Water to vape juice?

But, before you run over to your faucet, there are some very important things that you should know. Otherwise, you might end up ruining your vape altogether. Typically, it’s suggested that if you’re going to add water to your vape juice, you don’t go above twenty percent.

How do you dilute e-liquid?

The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG).

How can I dilute a 24Mg vaporizer?

You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too. 7.5ml of water would be too much....it won't make any (much, anyway) vapor.

Why do vapers add water to their e-liquid?

Another reason why vapers may choose to add water to their e-liquid is because they’re running very low and aren’t able to make it to a vape shop to grab more. Of course, if your bottle is extremely low, you have to add an incredibly small amount of water so that you don’t make the liquid so thin that it can’t be vaped.

Can you thin out vape juice?

If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.

What happens if you use water as vape juice?

At worst, this could burn your airways or mouth. At best, you'll just be inhaling a little steam. Plus, vaping water won't produce the thick clouds that people who vape are usually after, since those come from propylene glycol (PG) and vegetable glycerin (VG).

Can you water down NIC juice?

As we all know, vape juice already contains a high amount of water though many users still want to add water to their vape juice. If you are not enjoying your juice and want to add water to your vape juice, then the answer is YES! You can add water to your vape juice and can still vapor it.

How do I make my vape juice less harsh?

0:202:02Harsh Vape Fix - How to Get a Smooth Vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust try to turn the voltage down. And this means it's going to be less vapor.MoreJust try to turn the voltage down. And this means it's going to be less vapor.

Will my vape explode if I drop it in water?

Accidentally dropping your e cigarette or vape mod A rupture to the battery can occur as a result of this pressure. The battery, container, or both can then fail. This can cause overheating or an explosion.

Can I put honey in my vape?

Heating up honey causes it to caramelize and bubble, not vaporize. Trying to vape honey would undoubtedly ruin the coil and be a complete mess in your tank, not to mention ruining perfectly good honey. Inhaling them into your lungs is extremely dangerous and should not be put in your vape tank.

How do you dilute concentrated e-juice?

An easy guide to mixing Vampire Vape e-liquidUse the mixing beaker to blend the liquids together.Add 10ml (10g) of Blood Sukka concentrate (mixed at 20%)Add 5ml (5g) of PG.Add 26.67ml (33.60g) of VG.Add 8.33ml (10.5g) of nicotine based in VG.Mix them together and pour into a 50ml bottle.More items...•

What can you put in a vape instead of juice?

What Else Can I Put In My Vape Besides E-juice?WATER. Believe it or not, some people actually question whether or not they can vape good old-fashioned H20. ... ALCOHOL. ... FOOD GRADE OILS (OLIVE, VEGETABLE, CANOLA, COD LIVER, ETC.) ... HONEY, SWEETENED JUICE, & ESSENTIAL OILS.

How do you cut nicotine out of e-juice?

Some people simply add more VG to their existing e liquid bottle, and this naturally reduces the nicotine. Others use the same flavour e liquid but in zero nicotine, and dilute their e-liquid with that. You can simply add the zero nicotine as you use up the e-liquid.

Why does it burn my throat when I vape?

Volatile Organic Compounds and Diacetyl. Vaping juices may contain volatile organic compounds or diacetyl, both of which are known to cause throat irritation. 10 If you are experiencing a sore throat, changing products or quitting vaping may help relieve your symptoms.

Why is vaping so harsh on my throat?

Perhaps the most common cause for a harsh vape is the strength of nicotine is too high. This is an easy mistake to make, particularly if you're just starting out on your vaping journey, and switching up your e-liquid for one that contains less nicotine should swiftly resolve the issue.

Why does my vape burn my lip?

Some vapers are quick to blame it on a faulty coil, but new coils usually get burnt because they haven't been primed before use. By priming your coil, we basically mean preparing it and getting the wick nice and saturated with e-juice.

What is the best way to dilute e-liquid?

The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG). These liquids serve as the carrier for the flavors and nicotine in your e-liquids and do not alter the effects of your e-liquid on their own.

How long does it take to adjust to nicotine?

For each step you take down the ladder, give your body a few weeks to adjust. The first couple days may be a challenge, but your body will get used to the gradually lower nicotine levels.

How much nicotine is in a 50/50 mix?

This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent to 1.5 mg. Again, you can stop here for a few weeks and allow your body to adjust down once more. The other common method for diluting e-liquid is to purchase unflavored base liquids.

Can you mix 3mg nicotine with 50/50?

This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent ...

Can vaping help you quit smoking?

Updated: 5 Feb 2020. If you’re like most vapers, you got interested in vaping as a way to help you quit smoking. Vaping offers you a way to reduce the amount of damage your lungs and body suffers without giving up nicotine cold turkey. Instead, e-liquids use pure, concentrated nicotine that can easily be stepped down over time so you can keep on ...

FleetFoxes Senior Member ECF Veteran

I bought some 24mg e-liquid and it is a little too strong. Could I add some water to dilute it and make it an 18mg solution? I'm sure I could figure out the math of how much to add I'm just wondering if that is possible. Thanks

FleetFoxes Senior Member ECF Veteran

And if my math if correct I would add 7.5ml of water to dilute it down to 18mg. Idk maybe the concept is not correct but if someone could tell me if this is possible or if I would have to use a different liquid to dilute.

JC Okie REOnaut Verified Member ECF Veteran

That would be too much water, probably (unless you have a tiny little bottle (4ml, say) of the 24mg liquid. You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too.

JC Okie REOnaut Verified Member ECF Veteran

7.5ml of water would be too much....it won't make any (much, anyway) vapor. Better to dilute it with PG or VG.

FleetFoxes Senior Member ECF Veteran

Yes good point, thank you. Would you recommend vg or pg? I think I will just add in small amounts and keep trying until iit still has a nice flavor and a little less intensity. Plus that would give me a tad more juice for my money.

WallyO Ultra Member Verified Member ECF Veteran

Here's a simple way to look at diluting your nic levels. You can change the numbers to whatever you are using.

LucentShadow Super Member ECF Veteran

25% water would almost surely be way too much, unless your liquid is 100% VG, in which case it'd be likely too much.

Why do you need to add water to vapes?

Another reason why vapers may choose to add water to their e-liquid is because they’re running very low and aren’t able to make it to a vape shop to grab more. Of course, if your bottle is extremely low, you have to add an incredibly small amount of water so that you don’t make the liquid so thin that it can’t be vaped.

Is it safe to drink distilled water?

Using distilled water is absolutely essential. Tap water contains microbes, metals and other impurities that you don’t want to be inhaling into your lungs. Distilled water is perfectly safe to inhale, on the other hand, so, if you want to water down your e-juice, go and buy some distilled water jugs at the local supermarket.

Can you add water to e-liquid?

Yes, you can add water to your e-liquid. However, there are very specific ways to go about it if you want to actually improve your vaping experience. Follow this guide to do it correctly so that you can enhance your vape sessions rather than end up disappointed.

Can you add water to a VG vape?

It’s advised that you only add water to an e-liquid that has a high VG level. That’s because VG is thicker than PG, meaning that the juice can handle being thinned out a bit and still be able to become vapor when the coil is heated. Because PG-heavy-based juices are already fairly thin in consistency, adding a decent amount of water can interfere with its ability to be vaped properly.

How much distilled water should I use for vodka?

Distilled water is typically recommended at the same percentages of vodka, so about 5-7%. You want to get purified, distilled water, preferably from a pharmacy or online from a reputable seller so that you know it’s sanitized and safe. Don’t use tap water.

Can you use tap water?

Don’t use tap water. People in the past have used de-ionized water, but it’s not recommended anymore. De-ionized water only has minerals removed, but it’s not sterile and may contain microorganisms or bacteria. It’s not designed for food consumption.

Can you use vodka to clean coil heads?

It’s generally considered safe and is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them . If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.

Is vodka bad for vaping?

You might think adding vodka is dangerous, but you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them. It’s not a large amount of alcohol and not all flavors have alcohol, but if you vape, you’ve probably vaped e-juice that has alcohol.