Here's a simple way to look at diluting your nic levels. You can change the numbers to whatever you are using. 3 parts 24 mg. 1 part 6 mg. Add the 3*24 + 1*6 = 78. divide 78 by the number of parts which is 4 = 19.5 mg. Parts can be any quantity you want.
Full Answer
How do you dilute e-liquid?
The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG).
How can I dilute a 24Mg vaporizer?
You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too. 7.5ml of water would be too much....it won't make any (much, anyway) vapor.
How can I dilute 24Mg of THC without losing flavor?
You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half.
Is 25% water too much for a vape?
25% water would almost surely be way too much, unless your liquid is 100% VG, in which case it'd be likely too much. I'd recommend VG, if you'd prefer getting something a local store.
How do I dilute my vape juice?
E-juice dilution can be accomplished in two ways based on the VG/PG ratio:With higher VG e-juices, adding a drop or two of distilled water is the way to go, because high VG e-liquid is rather thick due to the viscosity of vegetable glycerin. ... With high PG vape juices, you can just add a drop or two of VG.
Can I water down my vape juice?
Yes, you can add water to your e-liquid and still vape it. There are actually lots of vapers out there who routinely add a certain amount of water to each vape juice bottle in order to enhance their experience.
How do I make my vape juice less harsh?
1. The Nicotine Content of your Liquid is Too High. If you have a vape pen with a high nicotine content, it could be too high, try reducing the nicotine content to 6mg because the less nicotine you have in your e-liquid, the smoother it will be.
What is the mix ratio for vape juice?
For every 10ml of vape juice, that is a 100%, then the ratio mixture is 95% to 80% PG/VG and the remaining variable is 5% to 20%, of concentrated flavor or whatever the chosen nicotine level. For those who prefer to create their own vape juice flavor, DIY vaping , that is where vaping ratios play the biggest role.
What can I use to thin out vape juice?
If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Is there a way to thin vape juice?
Adding about 5-7% of vodka will thin out your e-liquid nicely. This is why many vapers suggest using vodka to clean coil heads. But don't go overboard. Usually, 5 to 7% of alcohol will thin out your e-liquid nicely.
Why does my vape burn my throat when I inhale?
Dry Hit. If you inhale when there is no vaping juice to vaporize, you will experience a "dry hit." This can cause a burning sensation that is very uncomfortable. This will temporarily cause a sore throat.
Why is my vape hurting my throat?
However, many people who are ex-smokers tend to go overboard with their nicotine content to satisfy their nicotine cravings. This is, by far, the leading cause of throat irritation among vapers who are largely ex-smokers. Only those who smoke a pack a day are recommended to have high nicotine e-liquids.
Why is vaping so harsh on my throat?
Perhaps the most common cause for a harsh vape is the strength of nicotine is too high. This is an easy mistake to make, particularly if you're just starting out on your vaping journey, and switching up your e-liquid for one that contains less nicotine should swiftly resolve the issue.
What is the best mix for vape juice?
50/50 – this is the most common ratio used, ideal for basic vaping devices like the LiQuid Pro with atomiser resistance levels between 1.0 ohms and 2.0 ohms.
How can I make my vape juice taste better?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
How do I lower the VG in my vape juice?
0:252:335 Ways to Thin Out Thick E Juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse themMoreAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them. So if you want to use vodka to thin out your juice try adding 5 to 7-percent.
What is the best way to dilute e-liquid?
The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG). These liquids serve as the carrier for the flavors and nicotine in your e-liquids and do not alter the effects of your e-liquid on their own.
How long does it take to adjust to nicotine?
For each step you take down the ladder, give your body a few weeks to adjust. The first couple days may be a challenge, but your body will get used to the gradually lower nicotine levels.
How much nicotine is in a 50/50 mix?
This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent to 1.5 mg. Again, you can stop here for a few weeks and allow your body to adjust down once more. The other common method for diluting e-liquid is to purchase unflavored base liquids.
Can you mix 3mg nicotine with 50/50?
This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent ...
Can vaping help you quit smoking?
Updated: 5 Feb 2020. If you’re like most vapers, you got interested in vaping as a way to help you quit smoking. Vaping offers you a way to reduce the amount of damage your lungs and body suffers without giving up nicotine cold turkey. Instead, e-liquids use pure, concentrated nicotine that can easily be stepped down over time so you can keep on ...
The composition of an electronic cigarette liquid in percentages
If you want to make a DIY e liquid, you need to use the same ingredients as the ready-made e cigarette liquids. Here there are:
Equipment needed to dilute electronic cigarette liquids
To make customized liquids for your e cigarette, you need both the ingredients we mentioned earlier and the following equipment:
FleetFoxes Senior Member ECF Veteran
I bought some 24mg e-liquid and it is a little too strong. Could I add some water to dilute it and make it an 18mg solution? I'm sure I could figure out the math of how much to add I'm just wondering if that is possible. Thanks
FleetFoxes Senior Member ECF Veteran
And if my math if correct I would add 7.5ml of water to dilute it down to 18mg. Idk maybe the concept is not correct but if someone could tell me if this is possible or if I would have to use a different liquid to dilute.
JC Okie REOnaut Verified Member ECF Veteran
That would be too much water, probably (unless you have a tiny little bottle (4ml, say) of the 24mg liquid. You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too.
JC Okie REOnaut Verified Member ECF Veteran
7.5ml of water would be too much....it won't make any (much, anyway) vapor. Better to dilute it with PG or VG.
FleetFoxes Senior Member ECF Veteran
Yes good point, thank you. Would you recommend vg or pg? I think I will just add in small amounts and keep trying until iit still has a nice flavor and a little less intensity. Plus that would give me a tad more juice for my money.
WallyO Ultra Member Verified Member ECF Veteran
Here's a simple way to look at diluting your nic levels. You can change the numbers to whatever you are using.
LucentShadow Super Member ECF Veteran
25% water would almost surely be way too much, unless your liquid is 100% VG, in which case it'd be likely too much.
