E-juice dilution can be accomplished in two ways based on the VG/PG ratio: ·With higher VG e-juices, adding a drop or two of distilled water is the way to go, because high VG e-liquid is rather thick due to the viscosity of vegetable glycerin. Thinning it then with water is fine.
How to thicken vape juice?
This may be a bit of a challenge since most commercially sold vape juices are suspended in PG. Put it in a refrigerator. Placing your vape juice bottles in a refrigerator (especially during the summer) can significantly thicken them out. Thickening out vape juice is a pain (as you can see).
Should you add more VG to your vape juice?
Adding more pure VG into your vape juice will significantly improve the density and the size of your clouds. However, the downside to adding more VG is that it will dilute the flavor and possibly lower the nicotine level. In order to boost up the flavor of your juice look for flavorings that are suspended in VG.
How can I dilute a 24Mg vaporizer?
You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too. 7.5ml of water would be too much....it won't make any (much, anyway) vapor.
How do you dilute e-liquid?
The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG).
Is there a way to thin vape juice?
Adding about 5-7% of vodka will thin out your e-liquid nicely. This is why many vapers suggest using vodka to clean coil heads. But don't go overboard. Usually, 5 to 7% of alcohol will thin out your e-liquid nicely.
Can you thin vape juice with water?
Yes, you can add water to your e-liquid and still vape it. There are actually lots of vapers out there who routinely add a certain amount of water to each vape juice bottle in order to enhance their experience.
Why is my vape juice thick?
E-juice viscosity has a defined and noticeable effect on how enjoyable a vape session can be, as not all e-juices nor devices are made equal. Exactly how thick an e-liquid can be, is related directly to the proportion of propylene glycol (PG) and vegetable glycerin (VG) present in the mixture.
How do you soften vape juice?
0:202:02Harsh Vape Fix - How to Get a Smooth Vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust try to turn the voltage down.MoreJust try to turn the voltage down.
Does putting water in a vape ruin it?
Plus, vaping water won't produce the thick clouds that people who vape are usually after, since those come from propylene glycol (PG) and vegetable glycerin (VG). There's also a good chance you'll damage your device, potentially flooding out and rusting the coils and other components.
How do I make my vape juice less harsh?
1. The Nicotine Content of your Liquid is Too High. If you have a vape pen with a high nicotine content, it could be too high, try reducing the nicotine content to 6mg because the less nicotine you have in your e-liquid, the smoother it will be.
Is Thicker e-liquid better?
If your e-liquid is too thin then you'll go through a bottle even faster. Whilst 50/50 e-liquids can be used in high powered devices, you are better using a thicker vape juice such as a 70/30 ratio.
How do you vape thick oil?
Any decent vape oil containing a high concentration of cannabinoids such as ours is going to be very thick, and therefore take longer to heat and produce vapor than thinner e-cigarette juices. For this reason, its always best to start by pre-heating your oil for 5-10 seconds before using a “cold” cartridge.
How do you thin out high VG juice?
If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Why is my vape hurting my throat?
Volatile Organic Compounds and Diacetyl. Vaping juices may contain volatile organic compounds or diacetyl, both of which are known to cause throat irritation. 10 If you are experiencing a sore throat, changing products or quitting vaping may help relieve your symptoms.
Why is my vape juice so harsh?
Nicotine is too strong Perhaps the most common cause for a harsh vape is the strength of nicotine is too high. This is an easy mistake to make, particularly if you're just starting out on your vaping journey, and switching up your e-liquid for one that contains less nicotine should swiftly resolve the issue.
What is the best way to dilute e-liquid?
The other common method for diluting e-liquid is to purchase unflavored base liquids. All e-liquids are made up of some combination of vegetable glycerin (VG) and propylene glycol (PG). These liquids serve as the carrier for the flavors and nicotine in your e-liquids and do not alter the effects of your e-liquid on their own.
How long does it take to adjust to nicotine?
For each step you take down the ladder, give your body a few weeks to adjust. The first couple days may be a challenge, but your body will get used to the gradually lower nicotine levels.
How much nicotine is in a 50/50 mix?
This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent to 1.5 mg. Again, you can stop here for a few weeks and allow your body to adjust down once more. The other common method for diluting e-liquid is to purchase unflavored base liquids.
What is the best nicotine level for chain smokers?
In general, any nicotine rating above 12 mg is typically reserved for serious chain smokers. On the other hand, 6 mg is the most recommended starting point for those who smoke moderately or lightly. The goal is to choose a nicotine level that is at or just below your current smoking habit, but definitely not above it.
Can you mix 3mg nicotine with 50/50?
This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent ...
Can vaping help you quit smoking?
Updated: 5 Feb 2020. If you’re like most vapers, you got interested in vaping as a way to help you quit smoking. Vaping offers you a way to reduce the amount of damage your lungs and body suffers without giving up nicotine cold turkey. Instead, e-liquids use pure, concentrated nicotine that can easily be stepped down over time so you can keep on ...
How much water should I use to dilute vape juice?
Those rules are: Can not use water more than five percent. The water should be distilled water. The ratio should be one drop of distilled water per 2ml. If your vape juice has a high VG level, then you can use water.
Why can't I dilute vape juice?
Those reasons are: If you use more water, then it can burn your lips, tongue and throat. Diluting vape juice with water makes it too wet and too hot.
What is the difference between VG and PG vape juice?
VG-based juice: This juice offers thick and big clouds as its consistency is thick. Its nicotine strength is low. Flavors: Vape juice contains different types of food flavors.
How many flavors of vape juice are there?
Its nicotine strength is low. Flavors: Vape juice contains different types of food flavors. There are more than 4000 flavors in vape juice. Some of them are strong; some of them are mild.
What is the liquid used to make vapor?
Dilute Vape Juice With Water. The liquid used in electronic cigarettes or vape to make vapor is known as Vape Juice. It is also known as vapor liquid or e-juice or e-liquid. Vape juice has different types of color and flavor according to its user’s demand. Its main job is to replace the traditional tobacco flavor and to make vapor.
What is the ratio of vape juice?
Ratios of vape juice: Vape juice comes in different types of ratios. It is the ratio between VG and PG. If your vape juice states 60/40, it means it’s 60 percent contains PG and 40 percent contains VG. PG based juice: Those who want to give up smoking mainly use this type of liquid.
Can you add water to a vape?
If you are not enjoying your juice and want to add water to your vape juice, then the answer is YES ! You can add water to your va pe juice and can still vapor it.
How much distilled water should I use for vodka?
Distilled water is typically recommended at the same percentages of vodka, so about 5-7%. You want to get purified, distilled water, preferably from a pharmacy or online from a reputable seller so that you know it’s sanitized and safe. Don’t use tap water.
Can you use tap water?
Don’t use tap water. People in the past have used de-ionized water, but it’s not recommended anymore. De-ionized water only has minerals removed, but it’s not sterile and may contain microorganisms or bacteria. It’s not designed for food consumption.
Can you use vodka to clean coil heads?
It’s generally considered safe and is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them . If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Is vodka bad for vaping?
You might think adding vodka is dangerous, but you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them. It’s not a large amount of alcohol and not all flavors have alcohol, but if you vape, you’ve probably vaped e-juice that has alcohol.
FleetFoxes Senior Member ECF Veteran
I bought some 24mg e-liquid and it is a little too strong. Could I add some water to dilute it and make it an 18mg solution? I'm sure I could figure out the math of how much to add I'm just wondering if that is possible. Thanks
FleetFoxes Senior Member ECF Veteran
And if my math if correct I would add 7.5ml of water to dilute it down to 18mg. Idk maybe the concept is not correct but if someone could tell me if this is possible or if I would have to use a different liquid to dilute.
JC Okie REOnaut Verified Member ECF Veteran
That would be too much water, probably (unless you have a tiny little bottle (4ml, say) of the 24mg liquid. You could dilute it with some VG or some PG (0 nic)....but it'll dilute the flavor, too. You could get some of the same flavor at 12mg and cut your 24mg stuff to 18mg by mixing it half and half. That way you won't dilute the flavor, too.
JC Okie REOnaut Verified Member ECF Veteran
7.5ml of water would be too much....it won't make any (much, anyway) vapor. Better to dilute it with PG or VG.
FleetFoxes Senior Member ECF Veteran
Yes good point, thank you. Would you recommend vg or pg? I think I will just add in small amounts and keep trying until iit still has a nice flavor and a little less intensity. Plus that would give me a tad more juice for my money.
WallyO Ultra Member Verified Member ECF Veteran
Here's a simple way to look at diluting your nic levels. You can change the numbers to whatever you are using.
LucentShadow Super Member ECF Veteran
25% water would almost surely be way too much, unless your liquid is 100% VG, in which case it'd be likely too much.
