How do I switch the smok X Priv on?
Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on. To do this, click the fire button 5 times in succession to switch the SMOK X Priv on.
What is the smok X-Priv mod?
Like with any SMOK mod, often times you can buy the mod as a standalone unit or in a starter kit, which will include a tank to complete the experience. With the X-Priv, you can buy the mod itself and receive the SMOK X-Priv Mod, a USB cable, and a very lacking user manual.
What is X-Priv vape?
Moreover, it uses TFV12 Prince tank, with powerful V12 Prince cores you can fully enjoy the massive vapor. Powerful function, fancy appearance, X-Priv is here to conquer you! Innovation keeps changing the vaping experience! The max output power of X-Priv is 225W, and there are three modes for you to choose from.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do you turn on a Smok X priv vape?
How Does the Smok X-Priv Baby Kit Perform?To turn on – press the fire button quickly 5 times.To turn off – either enter the menu system to the last page and select the off icon or press the fire button 5 times – this will show “Locked” then hold down the fire button until the mod switches off.More items...•
Why won't my Smok X priv turn on?
If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do I reset my Smok X priv?
Hold all buttons WITHOUT batteries and plug into a USB port. Keep holding for ten seconds, throw batteries in while still connected, disonnect and reconnect to turn on.
How do you unlock the Smok vape power?
Using the Smok M80 is very simple. It features a 5 click lock system to prevent accidental misfires while your device is stored. To lock or unlock the device press the main fire button 5 times in quick succession. You can power your device off to conserve battery life by entering the menu system.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
Why is my SMOK vape screen not working?
Screen won't turn on If your SMOK mod has a screen and it is all black, the most likely cause is that you have inadvertently entered 'stealth mode'. This is easily rectified. If you are not in stealth mode then you may need to update the firmware or the screen may have been damaged.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you turn on Smok mag?
Turning on your smog mag vape couldn't be simpler. Firstly, you must locate your vape's main fire button. This is the button that is the device's on/off button. If there are numerous buttons on your new-fangled device, then consult your instruction manual where the fire button will be clearly outlined.
How do I know if my Smok vape is charging?
When it's time to recharge, that LED will start to blink and the battery will no longer activate. After you connect it to a power source, the LED will light up red while the device is charging, and will turn off when it is completely recharged.
How do you turn on Smok priv n19?
2:276:28Vaping 101 - Priv N19 Beginners Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext up we're going to turn the device on so the button here one two three four five click that fiveMoreNext up we're going to turn the device on so the button here one two three four five click that five times quickly.
Getting the Smok X Priv Set Up
Once you’ve unpacked your Smok X Priv box and read the instruction and safety manuals, you’ll be able to get set up. Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on.
Wattage Settings and Coils
Your pre-installed coil will be the V12 prince-Q4 Coil. While it’s suitable to be selected at between 40 and 100 watts, you’ll achieve the best results by setting you wattage between 60 and 80 watts. Using quadruple coils allows the Q4 to produce a resistance of 0.4 ohms, which provide a deep, rich vapour cloud as well as the flavours to match.
Memory Mode
We vapers vary in our tastes. What you may like with certainty, your fellow vaper may sneer at condescendingly. We’re all different and we all have different needs that suit our needs.
Setting Your Puff Count
Want to limit your vaping? Fancy knowing how many puffs you’ve had? Via the menu screen, opt for the puff count page and really take control of your vaping.
Screen Colour Settings
Want your vape pen to match your outfit or favourite sports team? To truly personalise your Smok experience access the menu screen and you’ll find the ability to change the colour settings of the screen – it's the little things in life, isn't it?
225W OUTPUT
The max output power of X-Priv is 225W, and there are three modes for you to choose from.
EASY- TO- READ MENU
The main menu and sub-menu are easy to read and operate, you can easily manage the vaping data.
MULTIPLE PROTECTIONS
X-Priv provides multiple types of protections to avoid potential risks.
How to turn off Smok?
After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach the power option, which may read “Power On” or something similar. Using the main fire button, change this to read “Power Off.”
Why is my smok vape not charging?
It could be that your firing pin has vape juice on it , or it might not be coming in contact with the charger.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
Do you need to charge a vape battery?
The vape batteryneeds to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode.
225W OUTPUT
The max output power of X-Priv is 225W, and there are three modes for you to choose from.
EASY- TO- READ MENU
The main menu and sub-menu are easy to read and operate, you can easily manage the vaping data.
MULTIPLE PROTECTIONS
X-Priv provides multiple types of protections to avoid potential risks.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Why do people like Smok mods?
It’s not unusual to hear beginner and advanced vapers alike sing the praises of mods by SMOK, mainly because the brand’s diverse product line-up offers exceptional options to suit every vaping style, experience level, and price point.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What happens if you hit the limit on vapor?
Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
How to fix no coil on tank?
Confirm that the coil is screwed in well. Remove the tank hand and carefully turn the coil so that it’s screwed in a little tighter . This is one of the most commonly-effective solutions to a “no coil” error message.
How to reset puff counter?
Reset the puff counter by selecting “puff clear” on the mod’s navigation menu.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
What are the different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What mode to use for SMOK coil?
If you’re just running the SMOK coil that came with the kit, just stick to wattage mode, as that is designed for standard power modes.
How many times do you wake a Smok mod?
Once you’ve unboxed your SMOK mod, and you have installed the correct batteries in the right orientation, simply click the fire bar FIVE times to wake the mod. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.
What is Trailblazer vape juice?
But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
What program is used to program SMOK?
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.
