The stylus design makes the O.pen discreet and the soft bottom acts as a power button that turns the vape pen battery on by clicking it 5 times. Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting.
Full Answer
How to charge your vape pen?
When using an external battery always follow these guidelines:
- Inspect your battery and make sure there are no tears in the wrapper after each use
- Always store your battery in a plastic case when not in use
- Never leave a battery in a hot car
- Use a name brand, authentic battery
- If your wrapper has a tear, re-wrap the battery
- If you have any concerns about one of your batteries, do not use it!
What is the best vape battery?
- These picks are based on actual use and no one can pay for a spot. ...
- Vessel Compass: Hits all points perfect for CCELL. ...
- Vessel Battery: The best airflow delivers the best battery for vape cartridges, but also highest cost. ...
- Yocan UNI Pro : Great Versatile Battery. ...
How to use a vape pen for the first time?
How to use a disposable vape pen for the first time?
- Take the vape out of the package.
- If there is a button, press it to turn on the indicator light. If there isn’t a button, move on to step 3.
- Take a deep breath through the mouthpiece and exhale slowly.
- Take a deep breath and exhale the vapour.
How to charge a vape battery?
You have 6 options to charge your without its charger:
- Use a phone charger
- Use a portable power bank
- Plug your vape into a desktop or laptop
- Use an external battery charger
- Replace your mods batteries
- Charge your vape with a DIY charger
How do you change battery pen settings?
0:293:22How to adjust the voltage on your 510 vape battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipExactly where you want to be by putting that slider. Exactly where you want it it doesn't have to beMoreExactly where you want to be by putting that slider. Exactly where you want it it doesn't have to be a straight 4 volts or 3.5 volts or 3.6 or whatever the case may be you could really do in-betweens.
How do I program my vape pen?
Fill your cartridge or tank with CBD vape juice and attach it to your vape pen. Wait at least 5-10 minutes to allow the coil to absorb the e-liquid. Take a small puff and wait a few minutes to gauge the effects. You don't need to hold it in, you can casually inhale and exhale normally.
What do the colors mean on my vape pen?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do you change the voltage on a vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly.
What color do vape pens turn when charged?
greenThe light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
What does blue light on vape pen mean?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
Why is my pen charger blinking red and green?
If the pen lights up green and the charger lights up red, your pen is dead! Once your pen reaches full charge, the charger light will turn green and the pen light will shut off, notifying you that your pen is good to go with full battery life.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What does changing wattage on vape do?
Wattage is simply the measure of the amount of power an electronic cigarette uses. Adjusting your vape wattage means altering the temperature produced by the atomiser/coil as the juice is heated. Adjusting your temperature settings allows you to fine-tune your vape to your desired tastes and preferences.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
How to clean a battery?
Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using. Avoid using and storing your battery in extreme temperatures, and always keep your battery away from water and extremely humid conditions.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
Can you leave a battery in overnight?
Once the light comes on, it is charging. Avoid letting your battery charge overnight. While it is easy to leave it in overnight, it will reduce the lifespan of your battery over time. Your battery will typically indicate when it is done by a change in the light on your device.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
