how to clean the taste from a vape coil

Let your coil soak in ethanol, vinegar or cheap vodka for a few hours Rinse the coil head under the tap Rinse again, but this time with distilled water

Full Answer

How to clean a vape coil?

Here's how to safely clean your vape coil one step at a time: The sticky stuff that builds up on a coil is usually not soluble in water, so you'll need something stronger to start with. Your top three options (pick any) are white vinegar, cheap vodka, or ethanol which is plain grain alcohol.

How do you know when to throw away a vape coil?

After a nasty burnt hit, your coil is probably ready to be binned. If you managed to catch it early, you can still give it a go and see if the burnt taste disappears after a couple of puffs. Unfortunately, chances are you’ve already burnt some of the cotton inside the coil, and it will need to be replaced.

Do vape coils burn out?

Sure, the vape brands sell them in packs but for an enthusiastic vaper, those replacement costs can become noticeable. Fortunately, coils don't actually burn out as often as we think they do. In some cases, your heating coils may have simply gotten dirty. Dirty coils can happen or about half a dozen different reasons.

What's the best way to clean a sticky coil?

The sticky stuff that builds up on a coil is usually not soluble in water, so you'll need something stronger to start with. Your top three options (pick any) are white vinegar, cheap vodka, or ethanol which is plain grain alcohol.

How do I make my vape coil not taste burnt?

Prime your coils: stop the burnt hitsTake a new coil out of the box.Drip some e-liquid on the wicking holes and inside the coil head (3-4 drops will do)Assemble your tank and fill it with ejuice.Screw your tank on your mod and set aside for 10 minutes.More items...•

How can I make my coil taste better?

So, carefully remove the coil from the hot water and submerge it in the cold water. With this, any remaining debris will fall off, and your coil will be clean again. If you have done this and still experience the annoying burnt taste vape, then you can clean it using vinegar or lemon juice in hot water.

How do I fix my vape taste?

The solution to a dry hit is simple. Just add more vape juice or THC concentrate! Refilling the vape tank will re-saturate the wick, which will allow your vape to produce vapor normally. If you're using a disposable oil cartridge or disposable vape, a dry hit signifies that you need to buy a new disposable.

Can I rinse my vape coil with water?

Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.

Why does vape taste nasty?

A dry hit happens when you hit your e-cig and there's not enough vape juice soaking into the wick inside your coil so the material of the wick itself gets singed. It tastes something awful and dry hitting a coil too many times can actually make it so burnt that it permanently gives off that terrible taste.

How do you clean a burnt coil?

How to Clean a Burnt Coil?Remove your coil from your vape.Soak it in ethanol or vinegar for several hours.Rinse with water.Leave to air dry.

Why does my vape taste burnt even with a new coil?

Prime Your Coil Instead, a new coil tastes burnt most likely because a vaper forgot to prime their new vape coil. Priming your coil is the process of prepping a new coil, ensuring that the wick is completely saturated with e-liquid before firing it up.

Why does my coil taste burnt after 2 days?

It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.

What Are the Components to Clean in a Vape Device?

The specific components that you'll want to focus on will vary depending on what the vape is designed to do. You'll also see some variation based on specific brands and models, though the following information will give you a good idea of what to expect with most general devices:

When to Clean Your Vape Device

Usually, you'll want to do a minor clean on your vaping device once every 1-2 weeks, with a deeper clean every month, but it’s dependent on how often you are using your vape device. This will help avoid experiencing unexpected burnt flavors and will help keep your internal components in working order.

How to Clean a Vape Tank

Depending on how dirty your vape tank is, there are several different methods you can use to get it comfortably clean. You may be able to get away with just a warm water rinse, or you may need a heftier cleaning agent (like baking soda) to get the job done.

How to Clean Your Vape Coils

If you just want to clean your vape coils, the process is easy! The most important step in cleaning vape coils is to make sure you are only cleaning your vape coils, which means the other components need to be removed. For most vape tanks, this includes removing the drip tip, top cap, the bottom base, and the quartz or plastic tank cover.

How to Clean a Vape Pen?

Vape pens usually require much less cleaning than a vape tank will (especially if using prefilled, disposable cartridges). However, you'll still want to keep residue from building up on the outside of the device (which will naturally happen as vapor comes into contact with the outside of the pen).

Taking Apart Your Device - Step by Step

Removing all the necessary parts of your vape carefully is essential for cleaning and keeping the device in a workable condition. With a Sub-Ohm tank for example, you have the following components:

Deep Clean Your Vape

The last thing you want is the remains of a Platinum E-Liquid with a Tobacco flavour lingering with your new fruit flavoured e-liquid. We’ve all been there! Cleaning your coil can be done in several different ways, but the method depends on how much time you have. The other trick is doing it well enough without putting your health at risk.

How Long Should I Let My Vape Coil Soak?

There is no right or wrong answer. Soaking depends on the amount of time you have before using your next e-liquid. You can start by leaving your device for up to ten minutes to soak the parts individually. However, if left to soak for a few hours, expect better results and the easier removal of certain stains.

How Long Do Vape Coils Last?

Although you can clean coils and tanks, this will only prolong the life of them briefly. Understand that if the coils are burnt beyond repair, no amount of cleaning will help. If discolouration or that burnt taste persists, seek a replacement immediately. With a multipack of compatible coils for your device, a burnt coil is no longer an issue.

How Do You Remove Gunk From the Coil?

This can often happen to rebuildable coils, because advanced vapers tend to go with thicker and higher ratio VG over PG e-liquids, sometimes even 100% VG for the ultimate cloud chasing experience. To try to remove any gunk from your coil before giving them a clean, which is instructed above, dry burn them briefly.

Can You Clean a Burnt Coil?

You can attempt to clean a burnt coil, but only to stall its inevitable end. Chances are even after cleaning them the best you can, they will still need to be replaced if the bad taste remains. If you have an ultrasonic cleaner like a jewellery machine, that’s the best way to know for sure if it can be cleaned after burning the coil.

Can You Clean Coils With Rubbing Alcohol?

Ethanol is the best pure alcohol example to use for cleaning your tank or coils. A cheap vodka soak can also work wonders. However, we advise against using rubbing alcohols like Isopropyl. If any remains on your key components, it could not only damage your health but also alter the device flavour production significantly.

How long do vape coils last?

This two-in-one part that contains both the heating element and the wicks doesn't last forever. Most don't last more than one - three months before it has either stopped firing or become 'scorchy', at which point a coil must be thrown out and replaced with a new one.

How to check if a coil is dry?

Finally, before you try out your freshly cleaned coil for the first time, check it for dryness. Hold it in your hand, tap it, touch the wick if you can. If the coil is completely dry, then it is safe to put back into use.

Why does sugary liquid make coils gummy?

But sugary e-liquid is the most notorious culprit. Because the coil elements heat up the liquid directly, the sugar in the mixture caramelizes directly onto the coils which causes them to become gummy and eventually stop working. So if your coil has failed or has become much weaker all too fast, try cleaning the coil before tossing it for a new one.

How to clean a deconstructed tank?

Use a paper towel or your first-hand towel to gently wipe down your coil, along with the other parts of your deconstructed tank. If you prefer, you can lightly damp the towel with water to help remove the oily e-liquid.

What is distilled water?

Distilled water is what you get when steam from boiling water is recollected. The steam is pure H2O and is distilled water when it condenses again. You can buy distilled water or use these tricks to make some at home.

Is it safe to rinse with distilled water?

Distilled water is free of all minerals and other tiny particles that are normally in our tap water. Rinsing once more time with a cup of distilled water isn't actually a necessary step, but it can help you ensure that even the tap water doesn't leave any residue behind on your coils. If you happen to have distilled water or feel like experimenting to make your own, it's a good step to take.

Can you use isopropyl alcohol in a pen?

Really, anything clear, potable (can drink it), and potent will do. Never use isopropyl / rubbing alcohol. This can etch some of the materials used in the coil, tank, and pen construction.

How to keep vape wick from drying up?

Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.

How to know when your coil is done?

Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.

How long does a coil last?

Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.

How to start vaping on a pod?

When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.

How to prime a vape tank?

How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.

Why does my e-liquid burn?

Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.

What to do if your coil is burnt?

Don’t be discouraged. Vaping is an enjoyable safer alternative to smoking. If your current coil tastes burnt, grab a new one and discard the bad one. Just don’t forget to prime it first!