Remove all debris from the chamber, use a Q-tip and some rubbing alcohol to clean it up a bit. If you are about to send a Crafty or Mighty vape back, keep the Cooling Unit and all other bits and pieces, only post back the unit itself and the charger. Once again, please, make sure the chamber is empty before you pack up and send your vape back…
Full Answer
How do I troubleshoot my crafty vape?
There is nothing really you can do about it. There is no way of troubleshooting, so you have to get in contact with your seller and get your vape fixed or replaced. Vape replacement can take a couple of business days after the unit is received by the seller. When the Crafty is charging, the LED will be flashing blue, which is totally normal.
How long does it take to replace a crafty vape?
Vape replacement can take a couple of business days after the unit is received by the seller. When the Crafty is charging, the LED will be flashing blue, which is totally normal. However, there are cases when turning the device on instead of starting up the heating process the LED will be flashing blue and then switches off.
How do I get my vape repaired or replaced?
There is nothing really you can do about it. There is no way of troubleshooting, so you have to get in contact with your seller and get your vape fixed or replaced. Vape replacement can take a couple of business days after the unit is received by the seller.
Are there any warranty claims for the volcano and plenty vapes?
Luckily, since we’ve been supplying the Volcano and Plenty desktop vapes from the time we started, there hasn’t been any warranty claim regarding these durable devices, however, the portable brothers, the Crafty and Mighty vapes may stop working from time to time. You know, heroes get tired too sometimes.
How do you clean a Crafty vape?
To clean your Crafty+, you'll need some rubbing alcohol, cotton swabs, and a glass cup or jar to soak some pieces in. You can soak all the plastic components except the cap lock with the hologram in the rubbing alcohol, but not the o-rings, which should just be rinsed in hot water.
How do you clean mighty Crafty?
0:462:14MIGHTY - How to Clean (by Storz & Bickel) - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean the filling chamber with a cotton swab that has been soaked in alcohol. Make. Sure no alcoholMoreClean the filling chamber with a cotton swab that has been soaked in alcohol. Make. Sure no alcohol leaks into the my tea.
How often should I clean my Crafty vaporizer?
Storz & Bickel recommends that you clean the Crafty+ every two weeks, but that depends on your usage and material. Heavy concentrate users will want to give their device a weekly cleaning, while light dry herb users could get by on every month or so.
Why is my Crafty flashing blue and red?
The LED display of CRAFTY flashes alternately red/blue. Battery temperature is either too high or too low. Allow the hot Vaporizer to cool down or the cold Vaporizer to warm up.
How do you clean the inside of a Mighty vape?
Remove the pieces of the cooling unit from the alcohol and finish cleaning them with q-tips and skillet/poker tools. I like to let the pieces soak for at least 10 minutes, just to help them come clean with less scrubbing. It's important to clean the area around the vapor path and get all the sticky stuff off.
How do you deep clean a mighty vaporizer?
If solely using herbs we recommend deep cleaning the Mighty Vaporizer every 30-40 sessions. Remove the cooling unit by twisting it off from the top. Pull the mouthpiece out using your thumb to apply pressure on the bottom portion while simultaneously pulling up and sideways.
Is it safe to clean vape with rubbing alcohol?
The easiest way to clean the vaporizer parts is to soak its elements in isopropyl alcohol. The longer you soak them, the less hassle there will be with the impurities removal. You can soak all the glass and steel elements – they can be left submerged in the alcohol overnight.
How do I descale my vaporizer?
0:311:47Vicks Warm Steam Vaporizer V150 - How to Clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the steam unit safely unplugged soak steam unit and four inches of white vinegar for 10 minutesMoreWith the steam unit safely unplugged soak steam unit and four inches of white vinegar for 10 minutes.
How do I clean the resin out of my vape?
Get rid of any visible debris whether it's used-up bud or excess oil. Most of your vape's small parts will be OK to soak in water, water with a few drops of dish soap or diluted rubbing alcohol (Read. Your. Manual), and use a cotton swab to loosen, scrub and wipe away visible gunk.
How long does a Crafty+ last?
The Crafty uses one lithium-ion internal rechargeable battery which lasts me about 45 minutes of average continuous use or about 4 sessions.
Can you use the Crafty+ while charging?
You can still use the Crafty+ while it's plugged into the USB cable, but the charging will stop while the heating system is on.
Why is my craft vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How to burn off a Crafty Plus?
The final step is a simple burn off: set your Crafty+ to the max temperature of 410°F and run a few cycles. Once you can’t smell any isopropyl alcohol your Crafty+ is good to go!
Can you use Crafty Plus after each session?
The rule of thumb to use with vaporizers is you want them to be clean enough that you don’t taste your last session. Giving your Crafty+ an “empty out” after each session is a great way to stay ahead of the cleanliness curve and save yourself from a resin-filled deep clean later down the road.
Is it normal for a crafty to flash blue?
Crafty – Flashing Blue LED. When the Crafty is charging, the LED will be flashing blue, which is totally normal. However, there are cases when turning the device on instead of starting up the heating process the LED will be flashing blue and then switches off.
Can a vaporizer stop working?
Like all electronic devices, the vaporizer is one that can just simply stop working one day unexpectedly. Worst, when it was still working in the morning, but just can’t make the night session anymore…. In desperation, you start looking for the instruction manual, but who knows where it is.
Can you test a crafty vape with a phone charger?
In this situation first, you need to check if the issue is with the charger or with the vaporizer. If you have a phone charging cable that is suitable for your Crafty then you can test your vape with it. Alternatively, you can send it back to your seller for checking, both the device and the charger.
