how to clean apx vape

• Make sure the vape unit is turned off and the heating coil element is cool
• Use an alcohol filled cotton swab or lightly dip a dry cleaning swab in 91% isopropyl alcohol
• Use the swab to wipe the inside of the coil chamber until clean
• Unthread and remove the coil from the vape body
• Use the cleaning swab to wipe the 510 threading of the vape body.
• Re-assemble vaporizer and dry-fire before use.
• Cleanup

How do I Clean my vape?

Separate the silicone liner from the plastic mouthpiece and place them in the soaking container for one hour Cleaning the chamber - The vape contains a built-in ceramic heating chamber with a screen at the bottom. The best way to clean the chamber is with an alcohol-filled cotton swab.

How to use the pulsar APX V2 vaporizer?

How To Operate The Pulsar APX V2 The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.

How do you turn on a dry herb vaporizer?

You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds. Once the vaporizer is on, you will see the LED screen light up with the current battery life and one of the five temperature options.

How do I clean the mouthpiece?

The mouthpiece consists of two pieces, the plastic outer shell and an insulating silicone liner. Pour enough isopropyl alcohol into a soaking container to cover the two pieces Separate the silicone liner from the plastic mouthpiece and place them in the soaking container for one hour

How often should you clean mouthpiece for APX vaporizer?

As often as possible. But more specifically, you should clean out the residue and debris after every session. You don't need to give it a thorough scrubbing, a quick clean is all that you need. However, you will want to give it a thorough scrubbing every ten to twenty sessions.

How do I clean my Pulsar APX wax?

0:121:54Pulsar APX 2 Cleaning Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen soak these pieces in a jar of your diluted Zeus purify. Solution for about half an hour thenMoreThen soak these pieces in a jar of your diluted Zeus purify. Solution for about half an hour then use the Zeus bristle pipe cleaners to dislodge any remaining particles. Next rinse and towel dry.

How long does APX vape last?

around 90 minutesPulsar APX 2 Portability and Vaping Capabilities The Pulsar APX 2 has pretty good battery life at around 90 minutes making it a portable option for most day trips. The battery is not replaceable though so you probably won't take it on longer trips where you'll be away from a charging base for more than the day.

How do you clean herb E?

Brush Your Dry Herb Vape Even round heating chambers will have some ledges near the top that will trap dry herb residue and caked on material. The cleaning brush or poker that can with your portable vape or pen should be able to remove and clogged pieces from the chamber and screen as well.

How do you clear a clogged vape?

The ingredients in the device are thick and sticky while cool, but they become runny again with just a little bit of heat. This means you can easily clear the vape by blowing into it or giving it a couple of quick blasts on the heat to melt the contents clogging the airway.

How do I clean my vape?

In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...•

How do I know when my vape bowl is done?

At that temperature you will have extracted up to 85% of the essential oils. So to me, the easiest way to tell if you're done vaporizing is if you hit the max temperature on your vaporizer (or 235C) and you're not getting any more visible vapor. If you can't see or feel any vapor, there isn't any left to come out.

How long should a vape session last?

Generally, 15 to 30 seconds are enough before you take another hit, but you can wait longer, especially if you are experiencing dry hits more often. It can be hard to get used to, especially if you're previously a smoker which doesn't require you to wait for anything.

How do you know when to change herbs in vape?

Once your herb has been thoroughly vaped, it starts to lose that sweet aroma. If you do it for long enough, it starts to take on a scent very similar to burnt popcorn, which is an unpleasant but very noticeable odor that no one likes. If you get that smell, it means that you vaped it way too much.

How do I clean my vape resin?

Get rid of any visible debris whether it's used-up bud or excess oil. Most of your vape's small parts will be OK to soak in water, water with a few drops of dish soap or diluted rubbing alcohol (Read. Your. Manual), and use a cotton swab to loosen, scrub and wipe away visible gunk.

Can you clean your vape with water?

Water is a great way to wash off some of that old gunk and congealed e-liquid that's polluting your vapour. First, you'll need to empty your tank if it isn't already. Then, you'll need to fill up a bowl or cup with warm water (or microwave it).

How do you clean dry herb vape resin?

Take a cotton tip and soak it in isopropyl alcohol. Now, wipe around the inside of the oven or chamber and remove any stubborn oil or resin that may have built-up there. Once it has all been cleaned and everything is clean, take a fresh cotton bud and remove any excess alcohol.