Drop the oven chamber and the dart in some rubbing alcohol and let them soak for a few hours. This Puffco Plus is ready for a deep cleaning! In the meantime, dip a cotton swab in some rubbing alcohol and swab any sticky gunk off the inside of the metal mouthpiece housing.
- Disassemble the vape and soak the dart and chamber.
- Wipe down the mouthpiece housing.
- Rinse the dart and chamber and set out to dry.
- Reassemble.
- Done!
How do I Clean my puffco plus?
The Puffco Plus’s small, simplistic design makes it a breeze to clean. You’ll only need a few items to get it back to its former glory. Take your Plus and unscrew the oven chamber from the battery unit. Remove the mouthpiece from the oven chamber and pull the dart out of the housing.
How to clean a vape pen cartridge?
How to Clean a Vape Pen Cartridge (Materials needed: Rubbing alcohol, cotton swabs, paper towel) Cleaning cartridge-loaded vape pens is generally easier than cleaning tank-based vape pens. Dab cotton swabs in rubbing alcohol and gently scrub the exterior of the cartridge, taking special care to remove any residue on the outside of the cartridge.
How do I use the puffco pen?
Click the cloud button 4 times consecutively to change the temperature setting.(Green - Low, Blue - Medium, White - High) For regular use hold the cloud button down and inhale. Pen will automatically shut off after 8 seconds of use. ... Do not attempt to open the Puffco Peak base. This will immediately void the warranty for your product.
What is the puffco plus vape?
The Puffco Plus is the Peak’s ultraportable little brother. If you’re unfamiliar with wax pens or concentrates in general, then take a look at this Quickstart guide to get up to speed with your Puffco Plus. As with any brand new vape, let’s charge it up before its first use.
How do you clean a dirty Puffco?
0:020:42How to Clean the Peak Pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst clean the gold connection pins on the atomizer in your base to ensure a proper connection.MoreFirst clean the gold connection pins on the atomizer in your base to ensure a proper connection. Also be sure to clean the air path on the base.
How do you clean a Puffco chamber?
How Do I Clean My Peak Pro?Remove the cap and unscrew the chamber from the base.Light Cleaning: Use a cotton swab to gently remove any residue with 90%+ isopropyl alcohol.Deep Cleaning: Submerge the chamber in 90%+ Iso for 20 minutes. Never use water (iso only).
How do you clean Puffco after each use?
3:008:05How to clean the Puffco Peak - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i'm just going to dip them inside the alcohol and start cleaning the inside. You don't need toMoreAnd i'm just going to dip them inside the alcohol and start cleaning the inside. You don't need to apply much force it comes off pretty easily especially if you clean it often if you let it gunk.
Can I clean my Puffco with normal cotton swabs?
The battery and threading can be cleaned of any leaked product using a paper towel or cotton swab dipped in ISO. That should help alleviate any sticky mess and should not affect the performance of the battery itself.
Why is my Puffco crackling?
A totally normal POP! As the e-juice is being heated by the coil and turns into vapor, it makes a quiet crackling noise. The type of device you use will depend on how loud this noise will seem to you, and people who take deep, intense puffs may also notice the noise is louder.
How do you clean Puffco ceramic?
Cleaning the Puffco Peak Ceramic Bowl only requires a glass beaker and ISO alcohol. The first step is to submerge the glass inside the beaker for at least 30 minutes. After it's been soaked, remove the bowl, then rinse it thoroughly using clean water. This removes all of the excess alcohol used for cleaning.
How often should you clean Puffco peak?
A good rule of thumb is to thoroughly clean the Peak each time the battery fully depletes and needs to be recharged. The atomizer itself should be soaked in ISO anytime you notice excess flooding or get a rainbow light response from the device.
Can I soak my Puffco atomizer in alcohol?
The atomizer separates into four different pieces but to prevent any damage, Puffco recommends keeping it all together and dropping it into some rubbing alcohol to soak.
Can I use 420 cleaner on my Puffco?
If your mouthpiece requires more intensive cleaning, use the Formula 420 Cleaning Plugs after pouring Formula 710 into the piece to plug it up. This way, the solution will be able to sit inside the piece to break down more advanced film and buildup.
How do you deep clean Puffco Peak Pro?
0:4012:08Puffco Peak Pro Deep Clean Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipA small flat head screwdriver as well as a precision screwdriver with a couple of different bits aMoreA small flat head screwdriver as well as a precision screwdriver with a couple of different bits a phillips head and a small hexagonal allen head so that's all you'll need for it and we'll get into.
Why do Puffco peaks blink 5 times?
The 5x flashing light is to indicate that there is a short circuit somewhere in the device. Contact our support team for further assistance.
Why is my Puffco pen not working?
Sometimes even the smallest bit of debris can cause a bad connection which stops the pen from working at it's full potential. To start, we recommend that you try cleaning the gold connection pins between the battery and atomizer to alleviate any connection issues that may be occurring between the two.
How to make a claim under Puffco Limited Warranty?
To make a claim under the Limited Warranty, you must provide the defective Product and a copy of the original receipt of purchase to Puffco for inspection. The receipt of purchase must indicate the Product purchased, price paid, date of purchase, and name of merchant.
How long does puffco warranty last?
Puffco provides one year of coverage for only the electronic base & battery. This covers defects in materials and workmanship for one year from the date of original retail purchase. Puffco does not warranty glass, atomizers, normal wear and tear, or damages caused by accident or abuse.
How to clean an atomizer?
Atomizer can be cleaned by submerging fully assembled part in Isopropyl Alcohol (99% preferred). DO NOT RINSE WITH WATER, AS WATER EXPOSURE TO CERAMIC CAN POTENTIALLY DAMAGE THE PART. Be sure to clean the gold connector pin on the base and bottom of atomizer with Iso soaked cotton swab as well.
How to get rid of sticky puddles in your bowl?
Clean your bowl. Use a cotton swab to clean the bowl after every single hit. If sticky material is left inside, simply heat up your device to liquify the concentrates, then use a cotton swab to soak up the puddle. Your browser does not support the video tag.
How many times does the Puffco Plus battery light flash?
The Plus battery light will flash 10 times to indicate that the battery needs to be recharged. In order to charge the Puffco Plus battery use the charger included in your Puffco kit. Plug the charger into any USB outlet for power. Screw the battery onto the opposite end of the charger.
What happens if a pen is not fully charged?
If the pen is not fully charged the battery will display a white light when the battery is attached. Once the pen has completed charging, the light will blink green and turn off. When an uncharged battery is screwed onto the charger, the charger light will change from green to red.
Can you use essential oils in puffco?
A variety of substances, consistencies, and flavors of essential oils can be used in the pen, as long as they are not overly runny, sappy or in liquid form. Dry herbs can also damage or short the chamber and we highly advise against using any type of dry herb in your Puffco.
How to clean a dart?
To remove the dart you can push it out of the mouthpiece by pushing through the top of the mouthpiece with a cotton swab.
Can essential oils be used in a pen?
Please also keep in mind a variety of substances, consistencies, and flavors of essential oils can be used in the pen, as long as they are not overly runny, sappy or in liquid form.
1. Charge up your dab rig
Although your Puffco Peak vaporizer will come out of the box with some juice in it, you should charge the battery to its full capacity before using it. Simply plug your dab rig to any charger with its included USB cable. Once it’s done charging, it’ll shut off. A full charge will last about 30 dabs or about 2.5 hours of use.
2. Prepare your device
Once you’ve charged your device, you’ll need to fill the glass attachment over the air holes, without overfilling it. Make sure to always refill the attachment before you attach it to the base to avoid any risk of water damage.
3. Load up your concentrates
Once you’ve tested your device, you can start loading it. Never use your fingers when loading your Puffco Peak, since they can degrade your material. Instead, you’ll want to use the right dab tool. Luckily, the Peak comes with a basic loading tool to help you serve your material.
4. Test out your device
Now that you’re loaded and ready to go, put the included carb cap over the atomizer, and start it up with a double click. The light should start pulsing to indicate it’s heating up. Once it’s done, it’ll tell you through three flashes and haptic feedback. Then, it’s time to inhale.
5. Clean your Puffco Peak
We recommend cleaning your Peak as soon as you finish using it. Just place a cotton swab inside the chamber and let it absorb any leftovers.
Ramon van Wanrooij - Managing Director - LinkedIn
Ramon is a well-known face in the cannabis accessories industry. As the managing director of Grasscity, Ramon is in charge of all the daily operations. He started working for Grasscity in 2014 as the Manager Supply Chain and is currently overseeing, besides his role at Grasscity, the global supply chain of High Tide Inc.
What is puffco plus?
The Puffco Plus is the Peak ’s ultraportable little brother. If you’re unfamiliar with dab pens or concentrates in general, then take a look at this Quickstart guide to get up to speed with your Puffco Plus.
How long does it take to charge a vape?
Take your Plus and unscrew it right above the button to reveal the charge connection. Screw the bottom half of your Plus (the battery) onto the USB Charger. A full charge will take roughly 30 minutes, and should last around 50 hits.
How to test a plus heater?
Screw the Plus back together and rapidly click the button five times to turn it on. Double-click to engage the heater into session mode and let it run until it times out, twelve seconds later. While it’s heating, blow into the heater to see if hot air bounces back at you. If it’s heating up, you’re good to go.
What is a vape pen?
Vape pens have a huge variety of shapes, sizes, features, and functions. Some require the push of the button to activate the heating element, while others are draw-activated. Some have a removable lithium-ion battery, and others are built in. Generally, a vape pen consists of the following parts: Battery. Tank.
How does a vape pen work?
Like any electronic, a vape pen needs power to function. Most vape pens are powered by lithium-ion batteries with a wide range of amps (amount of electrical power) and milliamp hours (mAh), which indicates how long the battery will run. If your battery is removable, like the popular 18650 lithium-ion batteries found in open system vaporizers, ...
What is the mouthpiece on a vape?
The mouthpiece is the part of the vape pen that makes contact with your mouth. These are often removable, and come in a variety of materials from silicone to plastic. It is especially important to keep this part of your vape pen clean, since this part touches your mouth.
What is a vape cartridge?
The cartridge (also referred to as a “cart” for short) is the chamber where your cannabis oil is stored for vaporization. This is another case where different products have different constructions and styles; some have fillable tanks that require the user to squeeze oil into the cartridge, and others have disposable, replaceable cartridges that are pre-filled with oil. If your vape pen uses cartridges, be sure you know which cartridges are compatible with your product, such as a 510-thread or PAX Pod.
How often should I clean my vape pen?
Step 5: Maintain a Regular Cleaning Schedule. Even if you only vape occasionally, you should clean your vape pen at least once a week. Depending on the amount of vaping you do, you may need to clean your equipment more frequently.
How to clean a tank with rubbing alcohol?
For solid concentrates, apply rubbing alcohol to a cotton swap and scrub away all residue. Soak the tank in rubbing alcohol and water for up to an hour before wiping down the inside with a cotton swab and left to dry on the paper towels.
How to clean mouthpiece?
(Materials needed: Rubbing alcohol, cotton swabs, paper towels, bowl, water) The cleanliness of your mouthpiece is essential for hygienic vaping. Dab a cotton swap or cloth in rubbing alcohol and scrub the inside and the outside of the mouthpiece, taking special care to remove any residue.