Some you have to screw the vape pen into the charger and plug it up to a USB charging block. Others simply come with your standard USB cable and plug up to your vape pen like your phone! Companies like JUUL have small magnetic USB chargers.
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
What is the battery size of the vision vape pen?
The vision vape pen is a 1300mAh battery with different voltage levels and 510 threaded connections. This vape pen is powered by an internal cell of 1300mAh with a regulatory power system that allows you to set your device to the desired voltage from 3.3v to 4.8v.
How to charge a vape pen?
There are hundreds of companies that make these vape pens, but they all function the same. especially when it comes to how to charge your vape pen. These internal battery vape pens usually come with a charger that operates by USB. Some you have to screw the vape pen into the charger and plug it up to a USB charging block.
How long should I charge my vision spinner?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall.
How do you charge a vision spinner without a charger?
4:155:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do I know when my vision spinner 2 is charged?
The eGo Charging Lead features an LED light which will glow red when charging. When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you charge a rechargeable vape pen?
To charge a vape pen, start by plugging the AC adapter into a nearby electrical outlet and inserting the large end of the USB cable into the adapter and connecting the smaller end to the port in your pen. Once you begin charging your pen, wait until it's finished to unplug it, which could take 1 to 4 hours.
How do I charge my vape pen?
Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
How do you charge a vision spinner battery?
0:061:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
How do you turn on the vision spinner pen?
As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times.
Why is my pen charger blinking red and green?
If the pen lights up green and the charger lights up red, your pen is dead! Once your pen reaches full charge, the charger light will turn green and the pen light will shut off, notifying you that your pen is good to go with full battery life.
Can I charge my vape pen with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How do I know if my kind pen is charged?
A: Your sensor will light up red while your pen is charging, and the light will turn green to indicate a full charge. We DO NOT RECOMMEND charging your device for more than 2 hours, and recommend un attaching all atomizers while your device charges.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
What does it mean when my vape pen blinks 3 times?
a short circuitCertain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you charge the vision spinner 2?
2:528:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt came with the battery is also clean on the end and to do that same type of thing just take a flowMoreIt came with the battery is also clean on the end and to do that same type of thing just take a flow piece of paper towel. Put down the threads here. And just run it around on the inside. Again. If
How long does the vision spinner 2 battery last?
The Vision Spinner 2 is a 1600 mah rechargeable battery device. The extended-life battery makes it ideal for heavy chain-vaping. The Vision 2 Spinner charging at full battery life, should last 14-16 hours of full flavor vaping.
How do you heat a vision spinner 2?
0:042:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
Can you overcharge a vape battery?
Don't Overcharge Your Vape Battery By leaving your vape plugged in when it's reached its capacity (fully charged), that extra power doesn't do anything. Well, nothing good, anyway. Overcharging your battery can lead to problems like: Capacity loss, meaning your battery will lose its charge a lot faster.
Russ1981 Full Member
This is probably a stupid question... I got a Spinner from a friend for my birthday after he asked what I wanted, and he bought me the 1300 mAh battery and nothing else. I figured that since it's basically an eGo battery the plug in charger that I got with my passthrough would work just fine, but there is no place to plug it into the battery.
Russ1981 Full Member
Great, thanks. I actually did some searching and found a combo with a wall charger attachment on Empire Mods and it's cheaper that way, I'll have to wait until it comes back in stock though. Where does it plug in though? You can't remove the dial on the bottom, and the eGo passthrough had a thread cover to plug in the charger so I'm confused.
struckus Super Member Verified Member ECF Veteran
you charge it by the atty screw 510 threads..it screws on like you would screw on a carto or atty etc..
kthedjsgirl Full Member
Still vaping on same spinner since I got it. Question is... it seems weak on the voltage I was using & now upping to 4.8. Can I charge it now or wait till it is fully dead? Will the light flash when it needs charging?
struckus Super Member Verified Member ECF Veteran
you can top it off at any time..li-ions prefer to be topped up frequently rather than being discharged fully..
reffjak Full Member Verified Member
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
struckus Super Member Verified Member ECF Veteran
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
What voltage is the Vision Spinner?
The vision spinner has spinning dials at the end of the battery with digits displaying the voltage range. You get to pick between 3.3 and 4.8 and the in-between figures that allow for minor adjustments
How many mAh does a vison pen have?
The mAh ratings are crucial because they display the battery's stored energy capacity. The vison pens come with mAh power between 650 mAh and 1300 mAh, providing for other mAh variations in between
How many mAh does an Ego battery have?
Considering that the vision capacity is at a maximum of 1300 mAh, different from the usual 1100mAh in most eGo batteries. The battery can last longer than the other brands, with several options you can select from.
Why is a pen safety feature important?
Safety features are necessary for any pen, and this is to protect it from damages that arise from short circuits and related faults. The vision system turns off your battery immediately. It senses a short circuit. And once the error is corrected, it turns back on.
Do vision spinners need batteries?
The vision spinners' batteries require a lot of care and maintenance. Worn out and damaged batteries run out quickly and take time to recharge. Vision is equipped with a led indicator that monitors how you use your battery and acts accordingly when you get closer to the set minimum level.
Do the buttons match our expectations?
Though the excellent performance of the vision than the other brands. The buttons do not match our expectations. At times they will cause you problems as you use it, making it challenging.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
How long does it take for an Ego to charge?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours. Once fully charged remove the battery from the eGo charging Lead.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
Why is my vape pen not charging?
If your vape pen continues to not charge even with other options, you likely have an issue with the electronics of your vape pen or the battery itself. Most vape pen owners will come across some kind of electrical problem they need to troubleshoot, it is simply the nature of owning an electronic device.
What is a power bank for vaping?
If you find yourself frequently vaping on the go and struggling with keeping a battery charged while away from outlets, then a power bank for your vape pen might be just what you are looking for! Power banks are essentially portable batteries that have huge capacities. They will have some kind of inputs for USB cords and other adapters, which allows them to charge other electronics, including vape pens! A power bank is ideal for vapes that tend to use a lot of power ( like dry herb vapes ), as well as vape pens that use micro-USB inputs for charging. You can also use them to charge other electronics, too, as long as they have compatible attachments for charging!
How to know if a vape pen is charged?
Many of these larger vape pens have an LED indicator light that lets you know if your device is charged. Some have a visual battery percentage display on the more advanced models. When using the USB charger, never leave your vape pen unattended. Always monitor the device while charging using the USB.
What is a vape pen?
They are similar to the internal battery vape pens in design and function. They usually differ because they are only used for nicotine-based liquids. Using a vape pen that takes an external battery is usually the choice of experienced vapers, but also many beginners.
What battery does a Uwell Nunchaku use?
These are usually a 18650 Battery. One of the most popular is the Uwell Nunchaku Vape pen, seen below, with a battery: Most vape pens that take an external battery have a USB port on the device. This is one way of charging your vape pen.
How many times can you charge a vape pen?
These lithium-ion cells have a lifespan that usually allows you to discharge/charge your vape pen up to 500 times. Using “pass-thru” charging will weaken your lithium-ion battery and make its life significantly shorter. Internal battery vape pens are great for low wattage uses like CBD Cartridges.
What is the best vape pen for beginners?
An internal battery vape pen is probably the most common. These devices are great for beginners and have the battery built right into the device. This is ideal for a beginner as they are very easy to maintain and use. These vape pens have many different uses and can be used with most 510 threaded cartridges.
Why do vapers use internal batteries?
Some vapers only use internal battery devices due to the ease of use and the convenience of charging on the go. They may not be comfortable with using an external battery. Others prefer external battery devices because they are more experienced, or they simply prefer the extra power you get with a larger battery.
Can you use a vape pen while charging?
Some vape pens can be used while charging. This is called “pass-thru” charging and it is a very desirable feature for many users. Personally, I think the best practice is to just let your vape pen charge, and only use it while the USB is disconnected.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
