Charging Plug the micro USB into the Micro USB port on the battery end, another end connect to AC adapter or USB port of power supply. How to fill e-liquid
How do I use the kangertech evod battery?
Dec 07, 2016 · Simple video guide on how to use the Kangertech EVOD power supply. This battery is the 1000mAh version but it is similar for other Kanger batteries.Any quest...
How do I charge my evod vape pen battery?
Once the area is all cleaned up, gently screw the charger into the top of the battery and stop once it makes contact, do not over tighten the charger or you can cause damage to the battery. If you don't have an EVOD specific pen and one just similar to it, you may be able to leave the tank on and use the charging port on the side or bottom of the battery.
When should I replace my kangertech evod atomizer?
With a USB Car Adapter, you can plug in your Evod Passthrough Battery and vape while the battery is charging. If you’re working at your desk but don’t have an outlet accessible, simply plug the USB end of the cable into your computer.
How do I use the evod VV battery?
To turn on battery, press manual button 5 times within 2 seconds. You will see white LED flash. To turn off battery, press manual button 5 times within 2 second as well, the white LED will flash! “5-click protection” can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket! Charging. Plug the micro USB into the Micro USB port on …
How do you charge a Kangertech EVOD battery?
How do I know if my EVOD is charging?
Why is my EVOD battery not charging?
How long does it take for a EVOD battery to charge?
Why does my Kangertech keep blinking?
What does blue light on EVOD mean?
Why is my EVOD battery blinking 3 times?
Why does my EVOD pen keep blinking?
How do I open my EVOD battery?
How do I know if my Kangertech is charging?
How do I know my vape battery is charging?
Can you overcharge a vape battery?
What is the voltage of a Kanger Evod battery?
The Kanger evod battery customized for the evod clearomizer and other 510/ego threaded clearomizer/cartomizers.It have a 3.7V constant output voltage, which makes its perform consistently no matter if the battery is fully charged or not,which make it more convenient than other e-cigs ,with no question!And it is also one of the special feature of kanger evod vv battery.
How to charge eGo fast USB?
The battery’s button has a 5-click On/Off.Press the button 5 clicks within 2 seconds and activate the battery on/off feature.Please use 500mA eGo Fast USB charger (coming soon), and 450mA eGo Fast USB ,Charger or 420mA eGo Fast USB Charger.When the battery connects the USB charger, the battery’s button flashes 3 times and turn off. When the battery is fully charged, the led on USB charger will turn from red to green.Please kep in mind taht the time of charging is usually around 3-4 hours.
Can an E-cigarette work by itself?
Since the e-cig is noe used by so many many people,the accesories of e-cig is now also playing an important role for the it.We can say without the accesory,the e-cig will not be able to work by itself .As a matter of fact,some portable and amazing accesories are are designed and produced,such as Innokin Ucan V2.0 ,the hardest oil bottle and the kanger evod vv,the nicest battery.Here ,I will shouw you show you something about evod vv battery.This article will tell you what exactly it is and how to use it.
How long does a Kangertech EVOD battery last?
As long as you stick to these tips & tricks and keep up with maintenance and cleaning, your battery should last you roughly 300 charge cycles and your tank should last you about 6-12 months. Please keep in mind that just because you might have a bumpy start doesn't mean you won't get the hang of it, vaping for beginners can be a little tricky. The next portion of this article will cover some of those aspects to keep your vape pen enjoyable and running smoothly.
How to change atomizer on Kangertech evod?
In order to change out your atomizer you first need to take the tank off of the Kangertech EVOD battery. Once you have the tank separated, remove the base of the tank to reveal the atomizer, if you have e liquid inside your tank you might want to do this with the tank upside down to prevent the e liquid from getting spilled. Now that your base is separated from the tank, grip onto and unscrew the atomizer. If you are unsure as to what the atomizer is, it is the small cylindrical metal tube sticking straight up from the base, you may want to review the other article on here titled, What is Vaping?: E Cigarette Vaping Basic's. With your atomizer removed you can now prime your new atomizer and reassemble your vape pen.
How to fill up a vape tank?
In order to fill up your vape tank, you need to take it off of the EVOD battery and remove the base of the tank. If you already have a little e liquid inside, you might want to do this upside down so that the remaining e liquid doesn't spill out and make a mess. Now that you have the base of the tank off, turn the tank upside down, ...
How to remove battery from EVOD?
In order to take the tank off of the battery, you first need to grip the silver ring under the colored part and glass windows with a finger and thumb, while holding the battery firmly in the other hand. (If you have an all silver kit, you should be able to see a line where the base separates under the glass windows of the tank.) After giving a little twist to the silver ring, the tank should start to unscrew and come off of the battery. Now to take the tank off of the base, you need to grip the same silver ring you did before, again with a finger and a thumb while this time holding the rest of the tank gently, but firmly, in the other hand. Then give the silver ring a little twist and it should start to unscrew from the rest of the tank, now you can see that the silver ring is the base of your tank.
What coils are used for EVOD tanks?
Kangertech SOCC Coils for the EVOD Tank.
Why does my vape pen leak?
Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although a small amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use. Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen and hopefully prevent it from occurring again right away.
How many pieces does an evod have?
Your EVOD can break down into four pieces, the base of the tank, the tank itself, the atomizer and the EVOD battery; also included or purchased separately should be a charging cable. (Some models also have removable mouth-pieces, which just pull out.)
What is a Kangertech EVOD?
KangerTech EVOD MEGA Simple Kit, is the updated larger version of original EVOD kit with 1900mAh large battery and 2.5ml capacity 4 windows cartomizer. It enables long time enjoyment! Vape with Joy!
Can a KangerTech 5PC dual coil unit work?
It can work with 5pc KangerTech Upgraded Dual Coil Unit for KangerTech Cartomizers.
What is an evod battery?
The Evod is a vape pen battery with eGo and 510 thread connection to utilize with almost any vape attachments, such as ego atomizers for 510 vape cartridges. The Evod vape pen battery lets you power up your favorite tanks with 1100mAh long-lasting battery life. Power the Evod battery on or off with five clicks. 8 seconds of overheat protection will turn the Evod battery off after 10 seconds, and overcharge protection keeps the Evod battery from overheating while it charges. The 1100mAh Evod vape pen battery is ideal for vaping on the go.
Is the Evod vape pen good?
A little tricky to figure out but the Evod vape pen is one of the best I’ve used in a while. It never overheats, and it has a pretty good battery life. The battery works well once you get the hang of using it, really worth the price!
Why do you turn on the battery on a Kangertech vape pen?
There are two reasons why Kangertech chose this method of turning on the vaporizer. First of all, this represents a safety characteristic which ensures that it is not being used while you have it in your pocket or that the battery is being used up by simply having it on. Moreover, it enables the battery of the vape pen to achieve higher temperatures necessary for a more satisfying vapoziring experience.
What is an evod battery?
EVOD Battery is one of the types of vape batteries which are using both 510 thread and eGo thread. With built-in vape batteries they have different distinctive features and advantages. When it comes to EVOD Batteries, they are drawing the power from the incorporated non-removable power cell.
What is the best vape starter kit?
EVOD 4 In 1 vape pen is the best vape Starter kit for the beginner, which is easy for using with the low price. The Evod tanks: MT for liquid, Glass Globe for dry herb, CE 3 for CBD oil and Quarzt coil atomizer for wax.
What is an evod vape pen?
EVOD Vape Pen Starter Kit Very convenient for injecting and filter e-liquid. No tar and other cancer causing substances. No second-hand smoke, environmental protection.
How many times does an evod vape pen flash?
When the battery is attached to the charger, you will notice that it will flash 3 times .
Why is it important to clean the tank before tightening the charger?
This part, where the tank is being tightened before tightening the charger, is very important to be cleaned thoroughly because it contributes towards saving the EVOD battery from being destroyed by any vape juice that might have gone down there.
What is a spring loaded pin?
A spring-loaded pin is a component which can be found in some EVOD batteries and its function is to keep this problem from happening. You should be very careful with the ones that do not have a spring-loaded pin incorporated, because when you tighten them too much you will push the small round pin placed in the 510 connectors too low. This way, it will not touch your tank or charger's 510 thread and it will appear as if the battery is inoperative or the charger is malfunctioning. If this happens, try as much as you can to adjust the internal pin.