A standard USB charger with 420mAh output is required for charging Spinner II like all the other eGo batteries. The wall adapter needs to have an output of 500mA. The battery can damage if you use non-standard charges and thus this is something that should be avoided at all costs. Your warranty will be invalidated if this happens.
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
How long should I charge my vision spinner?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall.
What is the best battery for a beginner vape pen?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Is the vision spinner II with variable voltage and 1600mah battery worth buying?
For those who wish to enjoy high performance, Vision Spinner II with variable voltage and 1600mAh battery is something that they must try. The battery life is extended, and you can find the device in the color you prefer.
How do I know my vision spinner is charging?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you charge a vision spinner battery without a charger?
4:155:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do you use a vision spinner battery?
0:002:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do I charge my vape?
These devices can be recharged by plugging them into any electrical socket. Your device will normally come with a USB cable, so all you have to do is connect it and plug it in to charge it. If the smartphone is charging, the indicator light should illuminate.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How do you turn on the vision spinner pen?
2:528:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt came with the battery is also clean on the end and to do that same type of thing just take a flowMoreIt came with the battery is also clean on the end and to do that same type of thing just take a flow piece of paper towel. Put down the threads here. And just run it around on the inside.
How do you charge AV Mod?
V-Mod can be charged via the micro USB charging port with the adapter 0.5-1.0A.
What is a vision spinner?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Who makes the vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
How do you charge a rechargeable vape?
Hook your vape pen up to its charger using the included USB cable. First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
How do you charge a non rechargeable vape?
1:103:11How to Recharge a Dead Disposable! (Fast and easy, for any brand!)YouTubeStart of suggested clipEnd of suggested clipNow if you're using a fast charger i recommend. Doing it for like one minute if you're using a slowMoreNow if you're using a fast charger i recommend. Doing it for like one minute if you're using a slow charger you can do it for about.
How long do you charge a disposable vape?
Some vape pens only require thirty minutes of charging to reach full power capacity. Others can take up to four hours to reach their charge capacity. An easy rule of thumb to go by is the larger the battery, the longer the charge time. RELX devices will include their charging cable in the package..
Russ1981 Full Member
This is probably a stupid question... I got a Spinner from a friend for my birthday after he asked what I wanted, and he bought me the 1300 mAh battery and nothing else. I figured that since it's basically an eGo battery the plug in charger that I got with my passthrough would work just fine, but there is no place to plug it into the battery.
Russ1981 Full Member
Great, thanks. I actually did some searching and found a combo with a wall charger attachment on Empire Mods and it's cheaper that way, I'll have to wait until it comes back in stock though. Where does it plug in though? You can't remove the dial on the bottom, and the eGo passthrough had a thread cover to plug in the charger so I'm confused.
struckus Super Member Verified Member ECF Veteran
you charge it by the atty screw 510 threads..it screws on like you would screw on a carto or atty etc..
kthedjsgirl Full Member
Still vaping on same spinner since I got it. Question is... it seems weak on the voltage I was using & now upping to 4.8. Can I charge it now or wait till it is fully dead? Will the light flash when it needs charging?
struckus Super Member Verified Member ECF Veteran
you can top it off at any time..li-ions prefer to be topped up frequently rather than being discharged fully..
reffjak Full Member Verified Member
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
struckus Super Member Verified Member ECF Veteran
This may be a dumb question, but I already have an eGo-T kit that bought from High Desert Vapes. Can I use the charger that came with the kit?
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
How long does it take for an Ego to charge?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours. Once fully charged remove the battery from the eGo charging Lead.
Can you charge a battery overnight?
Do not charge batteries overnight. Batteries contain electronic circuits and like any electronic device they can be damaged if dropped, mistreated or immersed in water (or other liquids). Not all USB ports are the same. Only use USB ports that are directly connected to your computer and not extension USB ports.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
SMOK STICK V8 BABY KIT
Stick V8 Baby kit consists of 2000mAh Stick V8 2000 battery and TFV8 Baby tank. Simple mechanical pen style matches with baby beast—TFV8 Baby tank, the newest pen kit brings you experience the purest taste.
The Kind Pen Mist 510 Thread Oil Vaporizer
The Kind Pen Mist 510 Thread Oil Vaporizer with LED and ceramic refillable cartridge, portable and discreet, is powered by 500mAh battery with 3 voltage levels.
SMOK NOVO Kit
Novo Vape Pod System Starter Kit is a fabulous and gorgeous vape device.It has built-in 450mAh battery and can contain 2ml e-liquid. You can drip your favorite oil into them.Innovation keeps changing the vaping experience!
Evod Twist 2 Battery
Evod Twist 2 Battery Personalized button design,flash colorful variable voltage button. Bottom scale indicates the position of voltage level. 3.2v to 4.8v smooth turning voltage adjustment dial by evod twist bottom and button.
Loosie Max 510 Thread Battery
Loosie Max 510 Thread Battery 350mAh with high-grade battery cell and LED lights, one-button control, features 4 level temperatures 2.7V, 3.3V, 3.7V, 4.1V.
EVOD Vape Pen
EVOD Vape Pen Starter Kit Very convenient for injecting and filter e-liquid. No tar and other cancer causing substances. No second-hand smoke, environmental protection.
