To change the device’s wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level. When you reach the desired power level, don’t touch the fire button for a few seconds.
Full Answer
How to change wattage on Smok mod?
Nov 29, 2020 · To change the device’s wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level. When you reach the desired power level, don’t touch the fire button for a few seconds. How to Fix Problems With the SMOK …
How do I use my Smok Nord 2 vape?
Oct 22, 2019 · Don’t lay your vape on its side. Turn the vape upright to minimize leaks, and close its air holes when it’s stored in your purse or pocket. Tighten the O-rings and seals. Check all …
How to use a vape device?
If you're still looking for an answer, Smok has the recommended settings on their website. If you have the MTL pod: 12W-25W (i keep mine at 10W) For the mesh pod: 10W-15W. 2. level 2. …
How do I set up different vaping modes?
Sep 24, 2020 · Once you’ve primed the SMOK Nord coil, insert it into the top cap. Make sure the white line on the bottom of it is pointing at the front and back of the device (not to the sides). …
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to install a coil on a Pod?
To install a coil, pull the pod from the device, turn it upside down, and on the bottom, there is a coil slot to simply push the coil in. The pod has a plug-n-play coil design that makes the process really easy and convenient. To remove the coil, pull the coil head up from the bottom of the pod.
How to fill a pod with liquid?
Filling The Pod: Before you insert the pod back onto the device, you will need to fill the pod with e-liquid since it has a side-fill silicone plug design . Locate the silicone plug located on the side of the pod, then pull open the plug, and lastly, pour e-liquid into the fill hole.
Do pods have magnets?
This is of course very simple since the pod utilizes magnets for easy pod installation. Both the bottom of the pod and the inside of the device have magnets. When you push the bottom towards the top of the device, it will be pulled into place and provide a secure connection you can rely on.
SMOK Nord 2 vs. Nord 1: Is It a Worthy Upgrade?
The SMOK Nord 2 has the same eye-catching design as the original SMOK Nord. It’s also compatible with SMOK Nord coils – but that’s where the similarities end. The SMOK Nord 2 has enough new features that listing them all would merit a separate article. Here are just few of the highlights.
What Coils Are Compatible With the SMOK Nord 2?
With its enormous selection of coils, you’re going to feel pretty overwhelmed when you shop for new coils for the SMOK Nord 2 unless you already have a good idea of what you need. Here’s an overview of the coils available for the SMOK Nord 2 at the time of writing.
SMOK Nord 2 vs. Novo 3
If you’ve been shopping around for a new pod system, you’ve no doubt noticed that the SMOK Nord 2 and SMOK Novo 3 look extremely similar. The SMOK Novo 3 also costs slightly less. So, how do the SMOK Nord 2 vs. Novo 3 compare? In short, the SMOK Novo 3 is a more basic device with slightly reduced capabilities compared to the Nord 2.
How to Use the SMOK Nord 2
While the SMOK Nord 2 is a pod system with advanced capabilities, it’s also incredibly easy to use. That’s the magic of pod systems! This is our brief guide to using the SMOK Nord 2.
How to Fix Problems With the SMOK Nord 2
Every vaping device experiences a problem from time to time. Thankfully, any SMOK Nord 2 problems that you may encounter are quite easy to resolve.
How many watts does a Nfix vape have?
1- The Nfix is a portable pod vape, yet this innovative device includes a 0.69-inch OLED screen where you can view important data and adjust the wattage of your vape from 1-25watts.
Can you remove puffs from a pod?
Puff Counter shows you how may puffs you have taken. The counter will reset each time you turn off the device or take out the pod (even with the device on). Yes, it would be nice if you could remove the pod without resetting the counter, but that’s not an option.
What is included in the Nfix kit?
My Nfix Kit came in a shrink-wrapped padded box which included the 700mAh battery, two 3mL 0.8ohm pods, the Type C charging cable, a user manual and a warranty card.
Does the Nfix overheat?
Like all SMOK vaping devices the Nfix includes those important built-in safety features. There’s an 8 second cut off (so it will never overheat), short circuit protection and a low battery warning.
Who is Hillary Miles?
Hillary Miles. Hillary, BECG's editor and contributing author has been an advocate for the vaping industry since 2009. After a long career writing and producing for national television networks, Hillary now focuses on tobacco harm reduction, health and well-being.
What SMOK NOVO Do I have?
SMOK makes a range of NOVO vapes now. You have the following options with respect to models:
SMOK NOVO vs SMOK NOVO 2 vs SMOK NOVO X
SMOK NOVO – The SMOK NOVO is the OG version of the line; it was the first pod vape to carry the branding NOVO. It has dimensions of 88.3 x 24.3 x 14.3mm and it uses a 450mAh battery.
How Long Does SMOK NOVO Last?
The SMOK NOVO runs on pods, and inside these pods are coils, and each coil will last in and around two weeks (maximum) depending on how you use it.
What Does Four Blinks on The NOVO Mean?
If your SMOK Novo’s LED light keeps blinking four times, then this is telling you that something is wrong with the pod.
Why Does My SMOK NOVO Taste Burnt?
If your SMOK NOVO tastes burnt, it means the coil is spent. As soon as the flavor of your vape juice starts deteriorating, this is a sign that the coil is failing and you should think about swapping it out for a new one.
Can You Reuse SMOK NOVO Pods?
Once your SMOK NOVO pod is dead, there’s no bringing it back, sadly. The cotton around the coil only has a certain amount of cycles – usually about 400 puffs – before it breaks down to the extent that it can no longer produce flavor.
How To Prime SMOK NOVO Coils
In order to get the best performance possible from your SMOK NOVO, you’ll want to prime the coils. Priming your SMOK NOVO’s coils ensures that the cotton inside the coil is adequately saturated before you use it and this, in turn, ensures you get great flavor from the first draw.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
What is a puff counter?
The puff counter is designed to allow users to track how much they vape, as well as place limits on the maximum number of puffs they take per day. Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
First Things First: Charge Up The SMOK Nord
This is important. Your SMOK Nord might power-up, but it’s been sat in its box for weeks, maybe months at a time, so you’ll want to give it a good 60 minute charge before using it for the first time.
How To Prime SMOK Nord Coils (And You Need To Do This)
This one is SUPER important. You have to prime the SMOK Nord’s coils before using them. Failure to do so may lead to burning them out prematurely – and nobody wants that.
Stopping Dry Hits On The SMOK Nord
Once you’ve primed the SMOK Nord coil, insert it into the top cap. Make sure the white line on the bottom of it is pointing at the front and back of the device (not to the sides). This ensures your coil is installed properly and will wick correctly.
How To Check SMOK Nord Battery Life
The SMOK Nord has a fire key. It’s handy for tactile firing and, generally speaking, I prefer this style to breath-activated pod mods.
Anything Else I Need To Know?
Nope, that’s literally it! As I said earlier, the SMOK Nord is a fantastic device that is super-simple to use. It has a kick-ass battery life, especially when used with its MTL coils, and the flavor is great (with both styles of coils).
