- To select a mode, give the fire button 3 presses - To switch modes, tap the plus and minus button and the fire button - To set the resistance level and puffs, use the fire button to access the coil or puff settings on the display and then the plus or minus button to adjust it
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
What are the different vaping modes and settings?
The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What temperature should you set your vape pen?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it’s safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures. But thin vapor doesn’t mean less flavor. In fact, the low-temperature vapor is actually the most flavorful.
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do I set my vape wattage?
Once you know your coil's wattage rating, start at the very bottom wattage. Then, gradually turn it up by a watt or two at a time, taking an inhale in-between. If your vape becomes too harsh or hot or tastes burnt, you know it's a little too high, so turn the wattage back down.
What coil setting should my vape be on?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage. They also tend to produce less vapour and at a cooler temperature. With this in mind, it's upon you to find out what works best for your palate.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What do the numbers mean on a vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What are the different vape modes?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
What does a and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
Can you vape at a lower wattage?
Setting your vape to a lower wattage is okay. You can still have a taste of the flavor of the juice, but not like the depth of flavors with a higher wattage. You can achieve a pretty decent vape experience at 10 watts.
Does higher wattage mean more flavor?
If you want a stronger or smoother flavour: Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
Does higher wattage burn coils faster?
When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
What is the best battery for a vape pen?
The thicker vapor does come at a cost. It uses up your concentrates faster and requires more battery power. The best vape pen batteries are Lithium-ion. These have a higher energy density and can better handle the energy requirements of medium-temperature vaping.
Does low temperature vapor have less flavor?
This setting produces a thinner vapor than higher temperatures. But thin vapor doesn’t mean less flavor. In fact, the low-temperature vapor is actually the most flavorful. The flavors and aromas in cannabis vapor come from the terpenoids (terpenes) within.
Is it safe to vape at high temperature?
High-Temperature Vaping. High-temperature vaping is not recommended. It is not as safe as vaping at low or medium temperatures. As well, the flavor quality is poorer and the experience is less reliable.
How to reset a sprite tank?
3) Continuously pressing mode button 3 times to unlock the mode button. 4) When install a tank, it will automatic identify its coil material and resistance, press up (+) button for reset, ...
What is the ECO mode on a tank?
When your battery is lower than 40%, it will automatic provide an option to go to ECO (Power ECO) mode. When your install the tank with temperature heating wire (SS, Ti, Ni), it will automatic provide an option to go to STC (Smart TC) mode.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
