Usually with higher VG the juice tends to be thicker. You can just add a drop or two of distilled water to thin it down if you want. Go only one drop at a time so you don't get it too watery. Different thickness of juices vary by vendor and sometimes even by flavor.
Full Answer
How to thicken vape juice?
This may be a bit of a challenge since most commercially sold vape juices are suspended in PG. Put it in a refrigerator. Placing your vape juice bottles in a refrigerator (especially during the summer) can significantly thicken them out. Thickening out vape juice is a pain (as you can see).
How to change vape juice in your tank?
When you are changing vape juice in a vape tank, it is a good idea to rinse out the tank with warm water. You don’t want the water to get into the base of the tank so make sure to separate the tank components and just rinse out the glass part! After rinsing, dab it dry with some paper towel.
Can I control the thickness of my vape clouds?
Unfortunately, if your device is not powerful enough or adjustable, you will not be able to produce the thickest possible vape clouds. If you are using a basic e-cig or vape pen, you are unlikely to be able to control your clouds' thickness no matter how hard you try.
Should you add more VG to your vape juice?
Adding more pure VG into your vape juice will significantly improve the density and the size of your clouds. However, the downside to adding more VG is that it will dilute the flavor and possibly lower the nicotine level. In order to boost up the flavor of your juice look for flavorings that are suspended in VG.
How do I make my vape juice less thick?
If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Why is my vape juice thick?
E-juice viscosity has a defined and noticeable effect on how enjoyable a vape session can be, as not all e-juices nor devices are made equal. Exactly how thick an e-liquid can be, is related directly to the proportion of propylene glycol (PG) and vegetable glycerin (VG) present in the mixture.
How can I make my vape juice hit harder?
For a Stronger Throat Hit:Use a higher-nicotine juice: More nicotine equals more throat hit. ... Choose a higher-PG blend: If you have a sub ohm device, a roughly 60:40 VG:PG mix is good, for a pod or basic vape kit you should aim for a bit more PG than that.More items...
How do I lower the VG in my vape juice?
0:252:335 Ways to Thin Out Thick E Juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse themMoreAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them. So if you want to use vodka to thin out your juice try adding 5 to 7-percent.
Can you thin Eliquid?
Thin: A thin e-liquid won't work for a high-powered vape device. If you're producing a large cloud of vapours, your vape juice will quickly run out. Because of this, it's best to go for a 70/30 ratio for a much thicker e-liquid for your high powered device.
Is Thicker e-liquid better?
If your e-liquid is too thin then you'll go through a bottle even faster. Whilst 50/50 e-liquids can be used in high powered devices, you are better using a thicker vape juice such as a 70/30 ratio.
Why does it burn my throat when I vape?
Volatile Organic Compounds and Diacetyl Vaping juices may contain volatile organic compounds or diacetyl, both of which are known to cause throat irritation. 10 If you are experiencing a sore throat, changing products or quitting vaping may help relieve your symptoms.
Why is my vape so weak?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How do I stop throat hits?
Change to a lower strength e-liquid. ... Don't confuse your sore throat with tobacco withdrawal. ... Change the PG/VG ratio of your vape juice. ... Pay attention to how much you are vaping. ... Change your vaping style. ... Change the flavour of your e-liquid. ... Try different coils for your device. ... Make sure you aren't getting dry hits.
How do you vape thick oil?
Any decent vape oil containing a high concentration of cannabinoids such as ours is going to be very thick, and therefore take longer to heat and produce vapor than thinner e-cigarette juices. For this reason, its always best to start by pre-heating your oil for 5-10 seconds before using a “cold” cartridge.
Does high VG juice burn coils?
If your juice doesn't soak into the wick as quickly, you're more likely to run into dry puffs and possibly burn your wicks. This means that juices with a high VG content (70 % or higher) can cause problems with wicking and may ruin your coils.
Which is better higher VG or PG?
VG has a higher viscosity than PG and therefore atomises at a different rate. This can quickly cause coils to burn out and taste pretty nasty! Likewise, we don't recommend using high PG e-liquids in sub ohm or 'DTL' kits as the thicker liquid can clog up the coils and cause a burning taste.
How to clean a septic tank?
Use soap water and clean the tank thoroughly, but carefully. If you have used a thick, dense e-juice in it, you should also clean it with slightly warm water after.
Can you discard juice every time you want to try a new flavor?
By doing this, you also won’t have to discard left-over juice every time you want to try a different flavor. You can also always come back to the previous flavor easily by simply replacing the tank.
Can you change vape juice multiple times?
If you are a passionate vaper who likes switching flavors frequently, I strongly recommend that you keep multiple tanks filled with your favorite e-liquids so you don’t have to change the vape juice multiple times.
Do vape juices expire?
Just keep an eye out for the expiry date of those e-juices when you are trying out multiple flavors. Remember that vape juices expire, so better check if the e-juice you stored is still good before vaping it.
Do you need to clean your vape coils?
While you are waiting for your tank to dry, you will need to clean your vape coil .
Is it hard to change vape juice?
The process of changing your vape juice is not difficult but it needs all your attention. Once you do it a couple of times, you will soon become a pro at it.
Can you disassemble a vape tank multiple times?
While doing so could get tedious, it is also not healthy for your tank which may end up cracking due to being disassembled multiple times. Even the lifespan of the tank will be affected—which can easily be avoided by just maintaining multiple tanks and switching your tank with the other one which you want to vape.
How to change vape juice in RDA coil?
How to change vape juice in an RDA is really easy. All you need to do is swap out the cotton. Before changing vape juice in a RDA coil build, you have to get rid of the old cotton wick. The former flavor will still be there and mix with the new vape juice unless you totally get rid of the old wick. When you pull out the old wick, you will notice ...
How long to cool a vape mod?
Take out the existing cotton and set your mod to 15 watts to burn off any residual e-juice. Wait 15 minutes for the atomizer and base to cool. Remove the atomizer base from your vape mod and insert a new strip of fresh cotton wick. Before assembling the RTA cap or vape tank, rinse out the cap or tank with warm water.
What is an RBA vape?
An RBA, or rebuildable atomizer, is a component of a vape tank that allows the vaper to switch from pre-built coils to a rebuildable deck. So you can do both, either use pre-built coils or build your own. Tanks like the Smok TFV8 and TFV12 are examples.
What is an RDA atomizer?
An RDA is a rebuildable drip atomizer. This is a vape device with an atomizer deck to build your own coils on. There is no tank that contains a reservoir e-liquid. Instead, e-liquid is dripped directly onto the wick and atomizer as needed. After every few vapes you drip on some new e-juice. It seems like a hassle to always be dripping new vape juice onto the atomizer but dripper's love it.
What happens if you don't switch wicks?
For example, if you were vaping a menthol vape juice and want to switch to a coconut cookie flavor, well if you don’t switch the wick you will probably end up with a cookie menthol flavor!
How to get rid of cotton residue on coils?
Do this by setting your mod to 15 watts, that’s all that is required. A few three second atomizer firings should do it. Wait at least 15 minutes so the base and coils cool. Then remove the base from the mod.
Do you taste the old flavor of vape juice?
The new flavor will be prominent but you will taste traces of the old flavor. The old flavor should fade away after a while but the residual taste of the previous vape juice flavor may remain for the duration of the coil's lifespan. If you don’t want any trace of the previous flavor, you will need to swap coils and rinse out ...
Why is my E liquid so thick?
On the reverse side of your e liquid being too thin, your e liquid can be too thick for lower powered/pen-like devices. The coil isn’t being heated up enough for the e liquid to fully go through the tank, into the cotton, and finally to be vaporised. If you e liquid is too thick, you will notice that the e liquid will start to congeal ...
Why is VG good for vaping?
VG, because of its sweet nature, can be found in cough syrups, toothpaste, and baked foods. VG also provides a smoother vaping experience. More experienced vapers will be looking for high VG after quitting smoking for some time. The biggest benefit of a higher VG ratio is the cloud production!
Why use PG in eliquid?
The reason eliquid manufacturers use PG is that it is very easy to vaporise! It is also used in asthma inhalers and fog machines among other food products. PG is a thiner liquid that allows the liquid to soak into the wick a lot faster. This allows you to vape quickly in succession without the wick drying out.
Why is my ecig leaking?
Thirdly, and the most common, is the ecig/tank itself may be of poor quality. If you notice that your tank isn’t secure, or your coil is worn out, the e liquid will start leaking through your coils. Simply ensure everything is secure, and replace the coil if need be!
What is the best ratio for shortfill eliquid?
The standard ratio in Shortfill eliquids (50ml and above) is usually 70/30. This is usually as when a person becomes accustomed to vaping they will start to look for bigger bottles and a smoother vaping sensation. 70/30 also produces bigger and better clouds which are great for vaping tricks and all day vaping.
What are the ingredients in E liquid?
There are two main ingredients in e liquid; vegetable glycerine and propylene glycol. These two ingredients make up nearly the entire bottle of your e liquid.
Can you use 50/50 E liquid?
If your e liquid is too thin then you will go through your e liquid even quicker. Whilst 50/50 e liquids can be used in high powered devices, you are better using a thicker e liquid such as a 70/30 ratio.
How to get thick clouds on a vape?
1. Look at Your Device's Power. In short, the higher the voltage of your device's battery, the more intense your vaping experience will be, and the bigger your vape clouds will be, too. If you have a device with a low voltage (e.g. traditional e-cigs and basic vape pens) then you may struggle to get thick clouds.
What is the ratio of vape clouds?
A huge factor when it comes to vape clouds is the PG:VG ratio present in the e-liquid you are using. Depending on the e-liquid, you could see ratios of 50:50, 80:20, and 40:60, for example.
What is the difference between VG and PG in vape?
As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG. These are designed especially for people who want to produce the thickest vape clouds.
Why do vapes have bigger clouds?
Increasing the device's airflow can also result in bigger clouds. When more air is flowing through your vape, the coil's temperature is kept low and this creates a cooling effect that aids the condensation process. Again, we will look at a device with adjustable airflow later.
Can you vape thick clouds?
The Best Vape for Thick Vape Clouds. Unfortunately, if your device is not powerful enough or adjustable, you will not be able to produce the thickest possible vape clouds. If you are using a basic e-cig or vape pen, you are unlikely to be able to control your clouds' thickness no matter how hard you try.
Can you use a vape pen to make clouds?
Luckily, there are plenty of fantastic vape pens available on the market that are adjustable. Whilst these are not designed solely for the creation of thick vape clouds, a little tinkering with them can give you the desired effect.
Can you inhale vape smoke?
Blowing thick clouds of 'vape smoke' isn't a case of inhaling as much as possible, though. There is a bit more to it than that. It requires the right products and technique to do it, and, in this article, we are going to explain how you can do it for yourself.
Does VG make juice thicker?
If so then VG is what makes juice thick, but it needs to be thi nned some so it won't clog your addy. It makes more vapor, but deceases the flavor so you would need to use a higher percentage of flavor if you really like flavoring to come through.
Can you thicken a VG?
VG can be used to thicken it if that's what you're after. Keep in mind though the other impacts (loss of flavor, potentially more vapor, lower nic level, etc.)
Does Vapor Kings juice leak?
The Vapor Kings site ejuice is very thick and does not leak out of the carts. How can you thicken DIY juice?
Can you use vodka to clean coil heads?
It’s generally considered safe and is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them . If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Is vodka bad for vaping?
You might think adding vodka is dangerous, but you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them. It’s not a large amount of alcohol and not all flavors have alcohol, but if you vape, you’ve probably vaped e-juice that has alcohol.
