Setting the Voltage Output - The Spinner II battery is capable of outputting a voltage from 3.3v to 4.8v The bottom scale indicates the position of voltage output level. To change the voltage, rotate the bottom spin dial to align the red line to the required voltage output level as marked.
Full Answer
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
What is vape4ever vision spinner 2 battery?
Vision Spinner 2 Battery | Vape4Ever Vision Spinner 2 Battery is the product of brand Vision, it's one of the best vapor products with the option of Black Battery:1pcs, etc. Customer Service: [email protected]
How do I use the vision spinner 2 battery?
We recommend it for use with the Aspire Bottom Dual Coil Clearomiser or Aspire Nautilus Mini, depends on you preferences. To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action.
How to use a vision spinner 2 atomizer?
Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally. We hope we’ve helped you figure it all out.
How do you charge a vision spinner 2 battery?
0:141:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
What kind of battery is in the vision spinner 2?
VISION SPINNER 2 II VAPE PEN BATTERY - VARIABLE VOLTAGE 510 / EGO BATTERY.
How do you use a vision spinner battery?
0:002:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do you turn on a vision spinner 2 vape pen?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times.
How do I know if my spinner 2 is charging?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
Who makes vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
How do you charge a vape battery?
To charge your battery, simply screw on the USB charger and plug into any compatible charging dock.
How do I charge my EVOD twist without charger?
4:105:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do I refill my eGo T vape pen?
eGo-t CE4 Tank System The included CE4 atomizer tank is a transparent vape tank which holds the eliquid and is made to be easy refilled directly from your E-Juice bottle or by using a squeezable needle tip bottle.
How do you use a spinner 3 vape pen?
Vision Spinner 3 S User Manual: The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.
How do you charge a carbon spinner 3?
1:264:28Spinner III (STARTER KIT) Review ~PEN STYLE STARTER PACKYouTubeStart of suggested clipEnd of suggested clipAlso in the box you're going to get as always your little micro USB charging cable and that justMoreAlso in the box you're going to get as always your little micro USB charging cable and that just simply plugs in in the bottom right.
How do you use a spinner 3 vape pen?
Vision Spinner 3 S User Manual: The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.
How much is an ooze pen?
$19.95Ooze Slim Pen TWIST Battery w/ Smart USB – Variety of Colors (MSRP $19.95)
How to unlock Vision Spinner 2 battery?
To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled. Charging time – Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all. Spinner II, no different to regular eGo batteries, requires a standard USB charger of 420mA output and a wall adapter of 500mA output.
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
What is the Vision Spinner 2?
The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery.
How long does it take for a vision spinner to charge?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall. Once the battery is conditioned, you will typically need to charge a low battery for three to four hours.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
Does the 510 thread work on a 510 battery?
Hey Jill, yes it has 510 threading and allows this battery to be compatible with most other 510 threaded attachments.
How to turn on Vision Spinner 2?
You need to press the power button five times in quite successions to get it done. When you do so, the button blinks a few times. With this method, a higher temperature is provided by the battery. It also ensures safety since the battery has little chances of activating accidentally.
What is the battery capacity of Vision Spinner 2?
Vision Spinner 2 Battery 1600mAh fits all eGo and 510 clearomizers, featuring an ergonomically designed spin dial at the bottom for precise voltage adjustment.
What does the orange button on a vape mod mean?
Orange indicates low battery with less than 30% charge and alerts you that you should recharge your device.
What happens if a battery is on and the button is flashing 3 times?
Protection against short-circuit: if a short circuit occurs when the battery is on, the button would flash 3 times and would seize to work temporarily till the threat is removed. Short circuits can happen if the battery is incorrectly operated
How long does it take for a Spinner 2 to charge?
Time of charging: considering that Spinner II has a large capacity, it needs nearly six hours to charge fully, assuming that all the power has been drained.
How to tell the usage level of Spinner II battery?
The usage level of the battery of Spinner II is indicated by the three colors of the button.
How to lock clearomizer battery?
You can lock or unlock the battery by pressing on the button five times in rapid succession. When you switch modes, the LED will blink. The button is disabled when the battery is locked, and thus the clearomizer is not powered.
ziggytrix Super Member Verified Member ECF Veteran
Button repair vid, not what you're trying to do, but she complains that it was very difficult to work with in general. You might contact her to see if she has any advice?
AnsonJames Ultra Member Verified Member ECF Veteran
The old Ego batteries are repairable and replaceable, not so much Twists and Spinners.
DavidOck ECF Guru ECF Veteran
Great! Hope it goes well, but even if it doesn't work, well, we can learn from mistakes as well!
AttyPops Vaping Master ECF Veteran
Sure. On both fronts. Tried the soldering of the batteries by-passing the circuit board of the spinner (as recommended by a previous post) and found out something about myself. I cant solder for toffee. Just couldn't make the stuff stick to the wires. I found this to be really surprising because i can normally turn my hand to most things.
GrnEyedPaCop Full Member
Hey, Mediocre Toker, I'm a bit late on jumping on this post, but I hope you don't mind, I have a question. I've re-soldered many disconnected wires from Ego Twists, but only from the top of the battery up.
