2) Press Fire Key and UP Button simultaneously to choose your desired ramp up option Norm/Soft/Hard in WATT MODE or 10-85W (18650)/ 10-100W (21700/20700) in TEMP MODE; 3) Press Fire Key and DOWM Button simultaneously to choose your desired mode, TC Mode or VW Mode; 4) Press UP or DOWM Button to adjust the temperature or wattage settings.
Full Answer
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
How do I set up different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running. If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
What is a good ohm setting for a vape?
This can usually be achieved at an Ohm setting of around 0.12 but you can still enjoy deep and rich flavours from coils offering Ohms of 0.4.
What does it take to maintain a vape?
There’s a few different elements to consider when setting up your vape and maintenance it to ensure your vaping experience is an enjoyable one. From changing the liquids that turn to vapour, to replacing batteries and coils, a firm understanding of major vape upkeep is in order to ensure you’re using your vape safely.
How do I change my vape settings?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
What does soft normal and hard mean on a vape?
When you use the “Hard” setting, the coil will reach its maximum temperature almost instantly when you press your mod's fire button. When you use the “Soft” setting, the coil temperature will ramp up slowly. So, how can you tell what the right vaping wattage is for your vape tank?
How do I change the settings on my Smok mag p3 Mini?
6:1312:09SMOK MAG P3 MOD REVIEW Everything You NEED to KnowYouTubeStart of suggested clipEnd of suggested clipAnd settings mode of course will take you into wattage or temperature. Control in temperatureMoreAnd settings mode of course will take you into wattage or temperature. Control in temperature control we have stainless steel nickel. And titanium. And this is where you set your temperature.
How do you lock the watts on a Smok mag?
Accidents do happen, you never know. To lock the SMOK Mag, simply click the trigger five times in succession (just as you do when unlocking).
How do you change the mode on a vape pen?
The stylus design makes the O. pen discreet and the soft bottom acts as a power button that turns the vape pen battery on by clicking it 5 times. Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting.
How do you make a disposable vape hit harder?
Block Your Disposable Vape's Intake Vent when Inhaling Try using your disposable vape with your finger placed lightly over the airflow vent. It'll make the vapor slightly warmer and more intense, and you may appreciate that effect.
How do you change watts to SMOK?
To change the device's wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level.
How do I reset my SMOK?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
What wattage should I vape at SMOK?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
How do I unlock the wattage on my SMOK vape?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
How do you unlock the wattage on a vape?
You need to long-press either of the up/down keys first to unlock the wattage, then press either the up or down button a second time to increase or decrease the wattage respectively.
How do you unlock a Smok mag pod?
Lock / unlock the wattage: pressing the up or down buttons together. Completely lock/unlock the device: 3 quick clicks on the fire button. Reset the puffs: pressing the down button and the fire button together.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
How to adjust wattage on a tank?
Connect the power supply to the tank. Make sure the set wattage is in the range of recommended wattage for coil, the version of the coil and the recommended wattage are printed at the front and back of the coil. Touch or to adjust the wattage. 1. Power On.
How to change password on a Fire atomizer?
1) Touch or to adjust the current wattage or temperature value; 2) Press Fire Key three times to lock the device (move the arrow to the right, and the screen can be unlocked.) 4. You can touch “Setting” > “Passcode” to set your own passwords. Make sure the coil is tightly screwed onto the atomizer base.
How to refill a sanitizer tank?
1) The tank uses top refill system, you just need to hold the tank with one hand , and use another one to screw off its drip tip. 2) Add e-liquid through the slot, and pay attention not to drip it into the central airflow tube. 3) Close the cap carefully and firmly.
Is Morph 219 the same as Smok Mag P3?
Both Morph 219 and MAG P3 have some of the same features. However, the Smok Mag P3 is an upgraded version and has more features than its predecessor.
How to use a vaporizer?
Before use please read the manual carefully#N#2. Connect the atomizer to a power source that is suitable for its intended use.#N#3. Please avoid making the e-liquid into your mouth directly#N#4. Please do not keep the liquid inside the atomizer if the device is not going to be used for a long period .#N#5. Please refill the tank when the e-liquid is nearly used out to avoid dry-burning of the atomizer.#N#6. Please do not drop, throw or mishandle this product as the outer shell or inner components may become damaged.#N#7. In order to prolong the operation of your product, please keep it away from excessive temperature and humid environment.#N#8. Please keep this product away from children and pregnant women.
How to replace coil head on atomizer?
Replace atomizer core: Firstly, unscrew the base, then unscrew the coil head from the base, hen secure your new coil head onto the base plate (ensure that it is screwed in securely), finally screw the new coil head into chimney and you’re ready to prime your new coil head.
What is mag grip?
Mag Grip, another new member of MAG family, which still continues the features of handheld mod, exquisite fire key, and magazine release. In addition, some fresh design concepts have been added: the distinctive OLED screen area and UP/DOWN buttons underneath perfectly blend the data adjusting together. And it is compatible with 21700, 20700 and 18650 batter; what’s more, a single 21700/20700/ battery can offer a power output up to 100Watts with high performance. MAG Grip comes with TFV8 Baby V2 Tank ADOPTING TWO new coils – Baby V2 S1 and Baby V2 S2, which are custom-made coils for Stick series battery with intense clouds and flavor. Holding MAG Grip in hand, you’ll feel the power of Grip. Innovation keeps changing the vaping experience.
How long is the mag grip warranty?
MAG Grip Warranty Period: 6 Months from the Purchase Date.#N#Within the 6 Months, some items may not be eligible for service due to misuse, damage, or other failures caused other than by manufacturer defects or premature failure. Please contact SMOK Authorized Vendor for more information and terms of service.
How to fill a e-liquid tank?
1) Hold the tank with one hand, and use the other to press top cap and move it counterclockwise. 2) Add e-liquid through the slot, and pay attention not to drip it into the central airflow tube. 3) Close the cap tightly with care firmly.
What connector does Mag grip use?
MAG Grip uses a spring loaded 510 connector. Please be certain that there is nothing between the mod and the attached atomizer.#N#1) Connect the atomizer to the device and tighten it clockwise.#N#2) After the device is powered on, please press Fire Key to vape.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
EIHYPI Moved On ECF Veteran
I know that my Revenger has an option to take a hit on hard, medium or soft. Even though I have been vaping for quite some time I have never messed with these particular settings.
Letitia Citrus Junkie ECF Veteran
I've tried all these settings and always go back to normal. Would probably use hard if I did tc.
Wraith504 Ultra Member Verified Member ECF Veteran
VW-HIGH mode : The kit provides a higher start watt in the first few seconds to bring you a stronger hit and wonderful vaping experience.
gofishtx Vaping Master Verified Member ECF Veteran
I know that my Revenger has an option to take a hit on hard, medium or soft. Even though I have been vaping for quite some time I have never messed with these particular settings.
FΛDED Senior Member ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
Letitia Citrus Junkie ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
Wraith504 Ultra Member Verified Member ECF Veteran
It's ramp up, how long it'll take to fire your coil at a certain setting. Soft's usually slower, if you want a longer deeper inhale. Hard's faster, for quicker shorter pulls. But, any mod can be like that - just raise or lower your wattage..
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do vape mods have TC?
First and foremost, a vape mod that supports TC. Most mods on the market come with a TC mode, although it is often left out from otherwise fully capable pod mods. If unsure, check the specs before buying a mod—or use the search function on this website. If a vape mod does TC, we will test it!
