Instructions.
- 1. The mod will automatically turn on after installing battery, the screen will then display user’s previous settings, after 15 seconds of being idle ...
- 2. Press the fire button 5 times within 2 seconds to either lock or unlock the device. While the mod is locked, press the fire button for 3 seconds to ...
- 3. Pressing fire button and down button simultaneously to either lock or unlock keys, which is indicated by a lock symbol on the screen. While the ...
- 4. Pressing fire button and up button simultaneously for 0.5 second will allow you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC ...
How do I use the Aspire speeder?
The Aspire Speeder is not such a complicated device to use or navigate. The firing bar and the selector bar are all that you need to get through all the menus and features loaded onto the chipset. You turn the device on with five clicks of the firing bar, which then illuminates the main menu.
What is the Aspire speeder 200W box mod?
A dark and humorless box mod that takes itself way too seriously, the Aspire Speeder 200W box mod that comes in a starter kit featuring the Athos tank and two coil options that lean heavy toward direct-lung hitters. I’m not sure if I’ve ever reviewed an entire starter kit from Aspire. I’ve done the Aspire Triton II tank and the Aspire Gusto ….
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do I turn on my Aspire speeder vape?
3:036:36The Aspire Speeder 200W TC Kit Unboxing & Quick Product OverviewYouTubeStart of suggested clipEnd of suggested clipThe home screen you can see the current wattage voltage resistance amperage vape mode lock functionMoreThe home screen you can see the current wattage voltage resistance amperage vape mode lock function and individual battery life indicators pressing the UP button. And fire button simultaneously. Will.
How do you fill a aspire speeder tank?
0:3710:21Aspire Speeder 200w Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know double o-ring there. And you just slide your kind of a drip tip cover really over it doesMoreYou know double o-ring there. And you just slide your kind of a drip tip cover really over it does come with a second shorter one it's clear.
How do I change the wattage on my Aspire speeder?
Aspire Speeder Various Modes Pressing fire button and “+” button simultaneously for 0.5 second will allow you to select between Wattage, Voltage, Bypass, CPS(C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).
How do I open my Aspire vape tank?
0:001:45How To: Fill And Prime The Aspire Revvo Vape Tank | VaporleafYouTubeStart of suggested clipEnd of suggested clipYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to removeMoreYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to remove the coil all that you need to do is remove the compression nut.
Aspire Speeder Kit
Aspire is proud to introduce the Speeder 200W Kit, a combination of the latest new high power Speeder mod and Athos tank. The Speeder is a dual bay removable 18650 battery mod which delivers up to 200 watts (yes that’s right, 200 watts!) of power.
Aspire Athos Coils
The all new innovative Athos coil heads, made for flavor, made for power. These new coil heads will satisfy even the most discerning cloud or flavor chaser. Our Tri-coil head (left) is rated at 0.3 ohms and the recommended power setting is 60-75 watts.
Aspire Athos Filling
Refilling. We designed the Athos tank with ease of use in mind, and it couldn’t be easier than filling this tank from the top. Just unscrew the top cap, fill with your preferred e-liquid through the easily accessible ‘fill slots’, replace the cap and you’re good to go.
Speeder Battery Installation
Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. Replace batteries. Pay attention to the correct positive and negative connections.
Automatic Display Adjustment
The 0.96 inch OLED screen will auto adjust as you turn it. Keeping things easy!
Aspire Speeder Various Modes
Along with its masses of power, there are also a ton of features that really allow for fine tuning. Wattage range 1-200W, Voltage range 0.1-8.4V, TC range 200-600T (100-315°C) Further options, TCR, Bypass and CPS can really nail the flavor/vapor from your tanks.
Aspire Speeder Kit Charging
Speeder can also be charged via a Micro-USB port. When charging the screen will display a flashing battery icon, voltage level,charge current as well as charge time.
How to fill an Aspire vape tank?
Some Aspire tanks fill from the top, and others fill from the bottom. Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping. Fill and reassemble tank. If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How Do I Clean My Aspire Tank?
It also removes residue from the mouthpiece and clears out the air vents. You can clean your Aspire tank by disassembling it and swishing it in warm water. If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
How to change coils on Aspire Revvo?
You’ll see the cone-shaped retaining nut that holds the coil in place. Twist off the retaining nut and lift the old coil straight up to remove it from the tank. drop in a new coil, ensuring that the o-ring on the side of the coil lines up with the tank’s glass. Replace the retaining nut and top hardware. Invert your mod – or place it on its side – for a few minutes to wet the cotton on the underside of the new coil.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Flavor Quality
The vapor quality from this mod and tank setup is excellent. I tried the penta-coil head first because I had to know how it performed, and it did not disappoint. Again, I normally dislike kanthal coils, but I didn’t notice so much of the taste I don’t like with this head.
Power Flexibility
The power flexibility is excellent. You’ve got your standard modes like wattage, bypass, and temperature control. This can deliver up to 200W of power, and there are temperature control modes for nickel, titanium, and stainless steel. The temperature range is 200F to 600F. There are also TCR settings.
Ease of Use
This is easy to use. There are three buttons total, one fire trigger and a button bar below the screen with an up and down option. With the device off, you click the trigger five times to turn it on.
Portability
The portability is average for a dual 18650 mod. It’s really no bigger or smaller than other options on the market with the same design.
Overall Experience
I think the Aspire Speeder is a great 200W mod, and the Athos tank is a winner as well.
The Kit Consists Of
Here’s what you’ll receive when you buy the Aspire Speeder 200W starter kit:
The Build: My Impressions
Upon taking the Aspire Speeder out of the box, I immediately recalled the Eleaf iKonn 200W, which I detested. The Aspire Speeder has a similar all-black (mine came in all-black) color scheme with rounded edges all-around and a centrally placed OLED screen.
How to Customize Modes
The Aspire Speeder is not such a complicated device to use or navigate. The firing bar and the selector bar are all that you need to get through all the menus and features loaded onto the chipset.
Comparing to Other Box Mods
I believe the last 200W device I reviewed was the Wismec Sinuous FJ200 that performed well, in my opinion, and had no problems chucking, thick, white streams of vapor. The power output of the Sinuous FJ200 paired well with the Divider sub-ohm tank that came included in the kit.
After All
Overall, I think the Aspire Speeder 200W starter kit has changed me as a vaper. I was very dismissive of cloud-chasers in the past, and everything that had to do with clouds. “You want clouds, then just look up,” was how my thinking went.
pfaber11 Ultra Member ECF Veteran
Will be upgrading my mod to an aspire speeder in a few weeks and was wondering if someone who has one could tell me the pros and cons of the device. They're 54.99 in my local vape shop and it's what I intend to purchase next.
Wilson! Full Member
Will be upgrading my mod to an aspire speeder in a few weeks and was wondering if someone who has one could tell me the pros and cons of the device. They're 54.99 in my local vape shop and it's what I intend to purchase next.
stols001 Moved On ECF Veteran
I don't own one but it is on my short list of mods that I'm looking at at the moment, and I've pretty much heard consistently good things about it from those who've purchased one.
hat.jr Full Member
I've had mine for about a month now, and I really like it. Looks good, feels good, works well. The display is very legible with a straightforward presentation. My first dual-battery mod, it's nice that it lasts longer before a battery change is necessary. There's really nothing I don't like about it.
jfcooley I find your lack of faith disturbing... Verified Member ECF Veteran
I don't own one but it is on my short list of mods that I'm looking at at the moment, and I've pretty much heard consistently good things about it from those who've purchased one.
stols001 Moved On ECF Veteran
That's what I call it. How long does it have to be to be a long list, because it gets longer all the time... ???
pfaber11 Ultra Member ECF Veteran
Thanks for the replies . Think I'm going to get the kit which comes with the Athos tank. Expecting great things. Vape on
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
