What do you do when your vape says Max puff?
If you see an error message reading “max puff” or “puff over,” and you are unable to continue vaping, there are two simple solutions: Increase your puff limit to better suit your preferences. Reset the puff counter by selecting “puff clear” on the mod’s navigation menu.
What is the smok rpm80 pro vape pod?
Designed primarily, but not exclusively for subohm vaping, the SMOK RPM80 Pro Vape Pod gives you huge vapor clouds and delivers a full and satisfying flavor. Unlike most other POD Mods from SMOK, (including its predecessor, the SMOK RPM 40), the RPM 80 Pro Kit takes a powerful 18650 external, rechargeable battery.
How do I Reset my Smok puff counter?
Reset the puff counter by selecting “puff clear” on the mod’s navigation menu. “No Coil” Using a mod without the coil attached can cause serious damage, which is why SMOK implements this error message as a safeguard for your mod.
How to change wattage on Smok mod?
Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. From here, you can then cycle through the output settings. How To Change Wattage In TC Mode: press the fire bar and the up button at the same time.
How do you remove Max puffs from Smok vape?
You can set the "puff clear" or "puffs reset": Click "No"= Quit resetting the puff, you will not be able to vape; Click "Yes"= Puff data will be set to 0.
How do you reset the puff counter on a Smok IPX 80?
You can also clear the puff counter by pressing the fire button and the – buttons at the same time, and change the color of the interface by pressing the fire button and the + button.
How do I add more puffs to my vape?
0:443:20Puff BAR Disposable How To Refill Puff Bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you just want to put one drop down in that so take your bottle of salt Nick. You can watch me doMoreBut you just want to put one drop down in that so take your bottle of salt Nick. You can watch me do it right here. Put one drop right. Here. Try to get it focused in rotate the side paid.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Is the Smok IPX 80 waterproof?
The SMOK IPX 80 Pod Vape Kit features IP67 waterproofing and dustproofing plus an 80W maximum output for a wide variety of vape styles. If you're looking for a sturdy, easy to use vape mod with a big display and coil options for most vape liquids, the IPX 80 is a perfect choice!
How long does a Smok IPX 80 coil last?
9 hoursSmok IPX80 Pod Kit – Battery Performance Using the RPM2 0.16ohm mesh coil at 40W I was able to get 9 hours continuous use from the 3000mAh internal battery.
How many cigarettes is 2000 puffs?
Each Supreme disposable device comes with 50mg/ml (5%) of salt nicotine. By volume, this is the equivalent of about 10 packs of cigarettes worth of nicotine. Enough for at least a week of use for the average pack-a-day smoker.
How do you charge a puff Max?
What Are The Steps In Recharging A Disposable Puff Bar? The first thing that you have to do is disassemble the speaker and then remove its circuit board. Pull out the battery from there, after which you'll find two loose wires that you'll need later. You can also get an old USB cable and use it as a charger.
How long does 400 puffs last?
The average disposable vape generally lasts anywhere from 200 to 400 puffs. It is often noted that 400 puffs from a vape is the equivalent of 20 cigarettes.
How do you reset a puff counter?
Press the fire button and “-” button simultaneously to reset the puff counter.
How do you unlock the SMOK mod?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What is a puff counter?
The puff counter is designed to allow users to track how much they vape, as well as place limits on the maximum number of puffs they take per day. Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.