Press up and down buttons simultaneously to make adjustment manually. And press fire button shortly time will cause the device go into the next 1-second-adjustment. Then press the fire button for 1.5 seconds to save the setting and go back to the customization mode.
What is the voopoo PNP coil series?
VOOPOO’s PnP Coil Series stands for Plug ‘n’ Play, a term describing the press-fit nature of installing their coils, eliminating the threaded connection that so many other coils use. This slight change made installing these prebuilt coils much easier, preventing accidental misthreads that could cause leaking issues or a poor connection.
What is the voopoo drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan.
Where to buy the drag 2 vape?
Although the Drag 2 has gained popularity rather quickly and you can buy it nearly anywhere, we recommend you to shop at VaporAuthority.com, an online vapor shop that has gained the respect of the vaping community due to their incredible customer service and a large selection of the industry’s latest and greatest products.
How to activate and vape your vape device?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
How do I change my vape coil?
How to Change a Vape Coil in a Pod SystemWhen the pod is empty, remove it from the device and hold it upside down.Twist the pod's base to loosen and remove it. ... Pull the old coil out of the pod.Push a new coil into the pod.Replace the pod's base and refill the pod.
When should I replace my Voopoo coil?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.
How long do Voopoo drag coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin film of residue when they are vaporized.
How do you unlock Voopoo drag vape?
0:050:47Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd if you hear it might be because your screen is locked your fire button is locked. And maybe itMoreAnd if you hear it might be because your screen is locked your fire button is locked. And maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is
How do I know if my coil is burnt?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
What happens if you dont change vape coil?
What happens if I don't change it? If you don't change your coil when it needs it, your vape juice will start to taste burnt. If it wears out, it will start to leak – you'll usually have changed it long before then.
What coil does the Voopoo drag take?
The VOOPOO DRAG 3 Replacement Coil is the original TPP Coil Series for TPP Pod and PnP Coil Series for PnP Pod. The DRAG 3 TPP Coil utilizes VOOPOO's new patented technology, coming with a 0.15ohm TPP-DM1, 0.2ohm TPP-DM2, 0.15ohm TPP-DM3 and 0.3ohm TPP-DM4 Coil to deliver unexpected flavor burst and dense vapor.
How can I make my Voopoo coil last longer?
5 Tips to Make Your Coils Last LongerPRIIME YOUR COILS. When you first install a new coil, it's important to completely soak the wick with e-liquid. ... USE HIGH-QUALITY E-LIQUIDS. ... REGULARLY CLEAN YOUR COILS. ... USE E-LIQUIDS WITH A HIGHER PG CONTENT. ... KEEP YOUR TANK FILLED.
What coil is best for Voopoo drag?
VooPoo recommends using this coil between 32-40W with 10mg nicotine or less.
How do you reset a Voopoo drag vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
Why does my Voopoo drag leak?
A) Over Filling: Overfilling your tank is the most likely reason for it to leak. Be sure to never fill your tank beyond the max capacity of the tank as it will leak out the top when you replace your coil. When in doubt, fill your device to about 90% capacity.
How do I change Voopoo drag settings?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the "W" wattage icon flashing. The wattage can be adjusted from 5W to 80W.
Installation of battery
1. Slide and open the battery cover according to the indicator at the bottom.
Precautions for Daily Use of Leather
1. Please try to avoid scratches by sharp objects or direct friction against rough articles.
How tall is the Voopoo Drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan. Enhancing its appearance, the Drag 2 Mod comes included with a visually striking resin inlay design that’s available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, and Ink finishes. Positioned on the backside of the device there is a magnetized battery door cover which is capable of housing dual 18650 batteries, giving you longer durations between charges.
What is a voopo?
brand, VOOPOO quickly gained recognition and became a leading manufacturer for vapor products. Originally established to serve the medical and industrials fields, the brand has a significant amount of experience manufacturing high-quality products. In 2017, just after its acquisition, VOOPOO became an exclusive partner of the GENE chip and started incorporating its high-end GENE.FAN chipset into each one of its devices. To this day, VOOPOO remains to be one of the most innovative vapor product brands and has released several iconic products.
Why does Drag 2 turn off?
There could be a couple of reasons why your Drag 2 Mod would turn off, and two of them primarily being that there is a sleep mode that activates after the device is inactive for 30 seconds or your batteries have depleted too low.
How to activate a Vape?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
How to turn on Drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process.
Why does Drag 2 say "Check Atomizer"?
That could be the result of a few things, such as your tank or atomizer not being attached to the device, it not making a solid connection, or an issue with your coil not making a connection. Most times when you see this prompt, it will be that your tank isn’t attached or not tightened enough to make a solid enough connection.
Spey Senior Member ECF Veteran
First guess (based on having a couple Drag's) the center pin in the mod may not be moving up/down freely because of debris (dried juice, etc.), and needs a through cleaning so it can compress and fully return freely.
Mordacai Vaping Master ECF Veteran
Have you dropped it so it landed on the atomiser and stressed the 510 connector on the mod?
Superuser187 Ultra Member ECF Veteran
If u dont have warranty u can try take it apart but u must be comfortable doing that stuff cause u may damage it....watch a video before...
uthinkofsomething Ultra Member ECF Veteran
Definitely try cleaning both the male and female part of the 510 connection with alcohol. A great way to clean the spring loaded 510 on the mod is to put a few drops of alcohol on a Q-Tip or whatever, you don't need much, and just push straight down on the pin a few times to make sure there's no gunk keeping it from moving freely.
UncleJunkle Vaping Master Verified Member ECF Veteran
Did you try at least one other tank? If so, do the ohms jump regardless of tank?
uthinkofsomething Ultra Member ECF Veteran
I did so far seem stable but at 20W Im getting 4V used to be around 3. I'm Using pharaoh 2.0 and only have this one.
UncleJunkle Vaping Master Verified Member ECF Veteran
I did so far seem stable but at 20W Im getting 4V used to be around 3. I'm Using pharaoh 2.0 and only have this one.
