Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting. The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale.
How do I change the voltage on my vape pen?
Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting. The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale.
How do I preheat my vape pen?
Just load your dab into an atomizer or 510 thread cartridge and attach it to the pen. Start the temperature somewhere between 3.8V and 4.1V. Run one cycle of the pre-heat mode. Click the button on the device twice and let it run without clicking it again. The pulsing light will indicate if it is still preheating.
Why choose Eureka vape pens?
Highly Recommended.” Founded in 2011, EUREKA was one of the first C02 extractors and distributors in California, pioneering the modern vape pen industry as we know it today. We pride ourselves in offering award winning, all natural products that are fully lab tested and come at an affordable price for all to enjoy!
Do I need to adjust the temperature settings on my pen?
Our Slim Twist pens are designed to require as minimal setup as possible, but adjusting the temperature settings can still make a difference in your experience. Wax users—don’t be afraid to crank the temperature up a few notches. If you use oil or a thinner concentrate, your pen should be good to go right out of the box.
How do I change the heat setting on my vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
How do I change the temperature on my vape battery?
0:503:22How to adjust the voltage on your 510 vape battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe other method is gonna be with the variable. Click buttons. So this one may not look like itMoreThe other method is gonna be with the variable. Click buttons. So this one may not look like it adjusts. But once you turn it on it'll flash and then you can do three clicks to change settings.
How do you use a Eureka vape pen?
Eureka Vapor has got you covered....Fully charge the battery using the USB adapter.Preheat the cartridge by clicking the button twice.Adjust the variable voltage according to preference.While holding down the battery button, draw for 2-4 seconds and release.Inhale and enjoy.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How do I change the voltage on my vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What is vape temperature control?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
Are Eureka vape cartridges good?
Eureka Vapor makes a great quality cartridge, minus a small beef. The cartridge performed way better than average. We'd rank it one of the better cartridges, about in the top 30% of cartridges out there. The hardware on the cartridge isn't bad, but it's not as good as CCELLs.
How strong are Eureka carts?
Eureka's vape cartridges come in 1,000 mg of quality distillate that's available in Sativa, Indica, and Hybrid strains. The cartridges come packed with a powerful 80-90% THC, not to mention 90%+ total cannabinoids and cannabis-derived terpenes, giving the cartridges their distinct flavor and natural healing powers.
Are Eureka carts legit?
A general way to check for fakes on a lot of cartridges is to look and see if they are using an authentic CCELL. If the brand uses CCELL hardware on their originals, check to see if your cart is a fake CCELL cartridge. Eureka Vapor does not use CCELL carts.
What does blue light on vape pen mean?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
How many times should u hit a cart?
A 1g cart (10 x 3) should be able to get you roughly 300 hits. Roughly 250-350. This is all dependent on how hard you pull, how long you pull, the viscosity of the oil, the humidity of the environment you are in, the charge level of your battery and type of battery, amongst other things.
For pre-filled oil cartridges, set your pen to 3.3V
Prefilled 510 thread cartridges require lower temperatures because the material is thinner and easier to heat. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it’s not giving you enough of a hit. Some oils have a thicker consistency, so just turn the dial incrementally until you get the desired hit.
For dabs (wax), set your pen between 4.0V-4.3V
Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors.
Pro tips for extending battery life
It’s actually a myth that turning your battery on and off between sessions will drain the battery. The opposite is true! Making sure your battery is fully resting during the hours between hits will improve your overall battery life between charges.
What to do if your vape pen is not temperature controlled?
If you have struggled with vaping certain products because of an unpleasant, harsh flavor, then consider lowering the temperature settings. If your pen does not allow for temperature control, consider getting a new vape pen!
Why do I have to control the temperature on my vape pen?
You could be trying to flesh out some of the different flavors from your chosen vape juice or concentrate. You could be attempting to try a new substance for vaping altogether. It could even be as simple as trying to get a normal amount ...
What temperature should I vape dry herbs?
The typical vaping range for dry herbs is 325F - 450F, though this can vary depending on exactly what you are looking for.
What temperature is wax vape?
The low end of wax vaping is 325F, but the ...
Can you start high on a vape pen?
Starting high right off the bat can burn whatever you are vaping , and it can even overload cartridges and ruin products. Nothing can ruin a day more than getting ready to vape a pre-filled cartridge only to immediately burn out its circuits.
Does e juice have a high temperature?
E-juice does not need as high of a temperature as other substances to create big clouds of vapor. However, the general rule still applies. The higher the temperature, the larger the vape cloud but the harsher the flavor. The lower the temperature, the less visible the vapor is but the smoother the taste will be.
Can dry herbs be vaped?
However, dry herbs are able to be vaped at a lower temperature than other substances, especially if you are looking to bring out more of the subtle flavor notes.
How to warm up a vape?
Below are a few things to keep in mind: Do not overheat the vape by rushing. Start on the lowest setting and allow the vape the time to warm up and to find the best settings. Start at lower settings and work your way up.
What temperature should I vape e juice?
However, generally speaking, it is wise to keep the temperatures hovering somewhere between 390 F and 490 F.
How does a vape pen work?
This is done by sending electricity from the battery to the coils or heating chamber.
What is 510 threading?
The threading on this vape pen is 510 meaning it is almost universally compatible with just about any other vape pen cartridge on the market. More to the point, this is an example of a ‘variable voltage’ vape pen which simply means that the voltage is adjustable (and therefore the temperature).
What temperature should I use for a dry herb vape?
On average, somewhere in the 380 to 410 F range is where most people enjoy vaping herbs. This will make sure that there is enough heat to create vapor but not necessarily too much to cause any issues like coughing or wheezing due to harshness. Flavor will vary depending on the strain of dry herb and the particular temperature chosen, however, keeping the vape within this range will avoid burn-outs and bad tastes.
What is a vape pen?
Vape pens come in all different shapes, sizes, and with all sorts of different features. Some are geared specifically towards certain types of dry herbs, oils or other concentrates while others are versatile. In the end, the specific information anyone will need to know for each vape is going to be based on all the different types ...
How to get better vape flavor?
Start at lower settings and work your way up. Remember that lower temperature settings preserve more flavor. However, higher temperature settings produce more vapeors and give a heavier ‘kick’ to the hit. When turning up the heat for bigger rips, make sure to avoid overheating the coils.